diff mbox series

[v4,4/9] ASoC: dt-bindings: wcd938x-sdw: add bindings for wcd938x-sdw

Message ID 20210414154845.21964-5-srinivas.kandagatla@linaro.org (mailing list archive)
State Superseded
Headers show
Series ASoC: codecs: add wcd938x support | expand

Commit Message

Srinivas Kandagatla April 14, 2021, 3:48 p.m. UTC
Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire devices RX and
TX respectively. This bindings is for those slave devices on WCD9380/WCD9385.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 .../bindings/sound/qcom,wcd938x-sdw.yaml      | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml

Comments

Rob Herring April 15, 2021, 4:39 p.m. UTC | #1
On Wed, Apr 14, 2021 at 04:48:40PM +0100, Srinivas Kandagatla wrote:
> Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
> connected over SoundWire. This device has two SoundWire devices RX and
> TX respectively. This bindings is for those slave devices on WCD9380/WCD9385.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  .../bindings/sound/qcom,wcd938x-sdw.yaml      | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
> new file mode 100644
> index 000000000000..fff33c65491b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,wcd938x-sdw.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Qualcomm SoundWire Slave devices on WCD9380/WCD9385
> +
> +maintainers:
> +  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> +
> +description: |
> +  Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
> +  It has RX and TX Soundwire slave devices. This bindings is for the
> +  slave devices.
> +
> +properties:
> +  compatible:
> +    const: sdw20217010d00
> +
> +  reg:
> +    maxItems: 1
> +
> +  qcom,direction:
> +    description: direction of the SoundWire device instance
> +    enum:
> +      - rx
> +      - tx

Was thinking these were some established bus properties...

This would just be implied by the 'reg' property index. You could define 
'reg-names' too I guess.

> +
> +  qcom,port-mapping:
> +    description: |
> +      Specifies static port mapping between slave and master ports.
> +      In the order of slave port index.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 4
> +    maxItems: 5

qcom,rx-port-mapping and qcom,tx-port-mapping?

Or keep a single property and the driver knows how many slave ports for 
each direction. IOW, an array of 9 with first 4 entries for tx and last 
5 for rx.

> +
> +required:
> +  - compatible
> +  - reg
> +  - qcom,direction
> +  - qcom,port-mapping
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    soundwire@3230000 {
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +        reg = <0x03230000 0x2000>;
> +
> +        codec@0,3 {
> +            compatible = "sdw20217010d00";
> +            reg  = <0 3>;
> +            qcom,direction = "tx";
> +            qcom,port-mapping = <2 3 4 5>;
> +        };
> +    };
> +
> +...
> -- 
> 2.21.0
>
Srinivas Kandagatla April 15, 2021, 4:57 p.m. UTC | #2
On 15/04/2021 17:39, Rob Herring wrote:
> On Wed, Apr 14, 2021 at 04:48:40PM +0100, Srinivas Kandagatla wrote:
>> Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
>> connected over SoundWire. This device has two SoundWire devices RX and
>> TX respectively. This bindings is for those slave devices on WCD9380/WCD9385.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>>   .../bindings/sound/qcom,wcd938x-sdw.yaml      | 61 +++++++++++++++++++
>>   1 file changed, 61 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
>> new file mode 100644
>> index 000000000000..fff33c65491b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
>> @@ -0,0 +1,61 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/sound/qcom,wcd938x-sdw.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Bindings for Qualcomm SoundWire Slave devices on WCD9380/WCD9385
>> +
>> +maintainers:
>> +  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> +
>> +description: |
>> +  Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
>> +  It has RX and TX Soundwire slave devices. This bindings is for the
>> +  slave devices.
>> +
>> +properties:
>> +  compatible:
>> +    const: sdw20217010d00
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  qcom,direction:
>> +    description: direction of the SoundWire device instance
>> +    enum:
>> +      - rx
>> +      - tx
> 
> Was thinking these were some established bus properties...
> 
> This would just be implied by the 'reg' property index. You could define
> 'reg-names' too I guess.
> 
>> +
>> +  qcom,port-mapping:
>> +    description: |
>> +      Specifies static port mapping between slave and master ports.
>> +      In the order of slave port index.
>> +    $ref: /schemas/types.yaml#/definitions/uint32-array
>> +    minItems: 4
>> +    maxItems: 5
> 
> qcom,rx-port-mapping and qcom,tx-port-mapping?
> 

If we have this property then "qcom,direction" becomes redundant.

> Or keep a single property and the driver knows how many slave ports for
> each direction. IOW, an array of 9 with first 4 entries for tx and last
> 5 for rx.

We can't have a single property with 9 entries as these are two separate 
devices, rx SoundWire Slave has 5 ports implemented where as tx SounWire 
slave has only 4 ports implemented in hw.

And the are on different SoundWire buses.

--srini
> 
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - qcom,direction
>> +  - qcom,port-mapping
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    soundwire@3230000 {
>> +        #address-cells = <2>;
>> +        #size-cells = <0>;
>> +        reg = <0x03230000 0x2000>;
>> +
>> +        codec@0,3 {
>> +            compatible = "sdw20217010d00";
>> +            reg  = <0 3>;
>> +            qcom,direction = "tx";
>> +            qcom,port-mapping = <2 3 4 5>;
>> +        };
>> +    };
>> +
>> +...
>> -- 
>> 2.21.0
>>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
new file mode 100644
index 000000000000..fff33c65491b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
@@ -0,0 +1,61 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd938x-sdw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm SoundWire Slave devices on WCD9380/WCD9385
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire slave devices. This bindings is for the
+  slave devices.
+
+properties:
+  compatible:
+    const: sdw20217010d00
+
+  reg:
+    maxItems: 1
+
+  qcom,direction:
+    description: direction of the SoundWire device instance
+    enum:
+      - rx
+      - tx
+
+  qcom,port-mapping:
+    description: |
+      Specifies static port mapping between slave and master ports.
+      In the order of slave port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 5
+
+required:
+  - compatible
+  - reg
+  - qcom,direction
+  - qcom,port-mapping
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+
+        codec@0,3 {
+            compatible = "sdw20217010d00";
+            reg  = <0 3>;
+            qcom,direction = "tx";
+            qcom,port-mapping = <2 3 4 5>;
+        };
+    };
+
+...