[v1,1/1] ALSA: hda/cirrus: Set Initial DMIC volume to -26 dB

Commit Message

Vitaly Rodionov May 31, 2021, 4:37 p.m. UTC

From: Stefan Binding <[e-mail]>

Previously this fix was applied only to Bullseye variant laptops,
and should be applied to Cyborg and Warlock variants.

Signed-off-by: Stefan Binding <[e-mail]>
Signed-off-by: Vitaly Rodionov <[e-mail]>
---
 sound/pci/hda/patch_cirrus.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Comments

Takashi Iwai June 1, 2021, 6:22 a.m. UTC | #1

On Mon, 31 May 2021 18:37:54 +0200,
Vitaly Rodionov wrote:
> 
> From: Stefan Binding <[e-mail]>
> 
> Previously this fix was applied only to Bullseye variant laptops,
> and should be applied to Cyborg and Warlock variants.
> 
> Signed-off-by: Stefan Binding <[e-mail]>
> Signed-off-by: Vitaly Rodionov <[e-mail]>

Thanks, applied.


Takashi

Patch

diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 726507d0b04c..8629e84fef23 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -2206,10 +2206,9 @@  static void cs8409_cs42l42_fixups(struct hda_codec *codec,
 		break;
 	case HDA_FIXUP_ACT_PROBE:
 
-		/* Set initial volume on Bullseye to -26 dB */
-		if (codec->fixup_id == CS8409_BULLSEYE)
-			snd_hda_codec_amp_init_stereo(codec, CS8409_CS42L42_DMIC_ADC_PIN_NID,
-					HDA_INPUT, 0, 0xff, 0x19);
+		/* Set initial DMIC volume to -26 dB */
+		snd_hda_codec_amp_init_stereo(codec, CS8409_CS42L42_DMIC_ADC_PIN_NID,
+				HDA_INPUT, 0, 0xff, 0x19);
 		snd_hda_gen_add_kctl(&spec->gen,
 			NULL, &cs8409_cs42l42_hp_volume_mixer);
 		snd_hda_gen_add_kctl(&spec->gen,