diff mbox series

dt-bindings: Remove "status" from schema examples

Message ID 20210720172025.363238-1-robh@kernel.org (mailing list archive)
State New, archived
Headers show
Series dt-bindings: Remove "status" from schema examples | expand

Commit Message

Rob Herring July 20, 2021, 5:20 p.m. UTC
There's no reason to have "status" properties in examples. "okay" is the
default, and "disabled" turns off some schema checks ('required'
specifically).

Enabling qca,ar71xx causes a warning, so let's fix the node names:

Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
        From schema: schemas/phy/phy-provider.yaml

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Robert Marko <robert.marko@sartura.hr>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: ChiYuan Huang <cy_huang@richtek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Dilip Kota <eswara.kota@linux.intel.com>
Cc: Karol Gugala <kgugala@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
 .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
 .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
 .../bindings/media/renesas,drif.yaml          |  1 -
 .../bindings/net/intel,dwmac-plat.yaml        |  2 --
 .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
 .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
 .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
 .../regulator/richtek,rt6245-regulator.yaml   |  1 -
 .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
 .../reset/hisilicon,hi3660-reset.yaml         |  1 -
 .../bindings/reset/intel,rcu-gw.yaml          |  1 -
 .../bindings/rtc/microcrystal,rv3032.yaml     |  1 -
 .../soc/litex/litex,soc-controller.yaml       |  1 -
 .../bindings/sound/st,stm32-sai.yaml          |  2 --
 .../bindings/sound/ti,j721e-cpb-audio.yaml    |  2 --
 .../sound/ti,j721e-cpb-ivi-audio.yaml         |  2 --
 17 files changed, 5 insertions(+), 45 deletions(-)

Comments

Mauro Carvalho Chehab July 20, 2021, 5:49 p.m. UTC | #1
Em Tue, 20 Jul 2021 11:20:25 -0600
Rob Herring <robh@kernel.org> escreveu:

> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
> 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -

>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -

Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> # For media


Thanks,
Mauro
Sam Ravnborg July 20, 2021, 5:56 p.m. UTC | #2
Hi Rob,

On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
> 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml

I had preferred that the names was fixed in a dedicated patch - to avoid
mixing things.

But thats just nitpicking, so:
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Rui Miguel Silva July 20, 2021, 6:15 p.m. UTC | #3
On Tue Jul 20, 2021 at 6:20 PM WEST, Rob Herring wrote:

> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --

Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>

Cheers,
   Rui
Alexandre Belloni July 20, 2021, 6:40 p.m. UTC | #4
On 20/07/2021 11:20:25-0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
> 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -
>  .../bindings/net/intel,dwmac-plat.yaml        |  2 --
>  .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
>  .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
>  .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
>  .../regulator/richtek,rt6245-regulator.yaml   |  1 -
>  .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
>  .../reset/hisilicon,hi3660-reset.yaml         |  1 -
>  .../bindings/reset/intel,rcu-gw.yaml          |  1 -
>  .../bindings/rtc/microcrystal,rv3032.yaml     |  1 -
>  .../soc/litex/litex,soc-controller.yaml       |  1 -
>  .../bindings/sound/st,stm32-sai.yaml          |  2 --
>  .../bindings/sound/ti,j721e-cpb-audio.yaml    |  2 --
>  .../sound/ti,j721e-cpb-ivi-audio.yaml         |  2 --
>  17 files changed, 5 insertions(+), 45 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
>          phy-names = "phy";
>          pinctrl-names = "default";
>          pinctrl-0 = <&hdmi_pins>;
> -        status = "disabled";
>  
>          ports {
>              #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
>          phy-names = "phy";
>          pinctrl-names = "default";
>          pinctrl-0 = <&hdmi_pins>;
> -        status = "disabled";
>  
>          ports {
>              #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
>              avee-supply = <&ppvarp_lcd>;
>              pp1800-supply = <&pp1800_lcd>;
>              backlight = <&backlight_lcd0>;
> -            status = "okay";
>              port {
>                  panel_in: endpoint {
>                      remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
>          clock-names = "pclk", "wrap", "phy", "axi";
>          power-domains = <&mipi_pd>;
>  
> -        status = "disabled";
> -
>          ports {
>              #address-cells = <1>;
>              #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
>                      power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
>                      resets = <&cpg 513>;
>                      renesas,bonding = <&drif11>;
> -                    status = "disabled";
>              };
>  
>              drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
>          snps,mtl-rx-config = <&mtl_rx_setup>;
>          snps,mtl-tx-config = <&mtl_tx_setup>;
>          snps,tso;
> -        status = "okay";
> -
>          mdio0 {
>              #address-cells = <1>;
>              #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
>      ethernet@c8009000 {
>        compatible = "intel,ixp4xx-ethernet";
>        reg = <0xc8009000 0x1000>;
> -      status = "disabled";
>        queue-rx = <&qmgr 4>;
>        queue-txready = <&qmgr 21>;
>        intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
>      ethernet@c800c000 {
>        compatible = "intel,ixp4xx-ethernet";
>        reg = <0xc800c000 0x1000>;
> -      status = "disabled";
>        queue-rx = <&qmgr 3>;
>        queue-txready = <&qmgr 20>;
>        intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
>    # UART example on Raspberry Pi
>    - |
>      uart0 {
> -        status = "okay";
> -
>          nfc {
>              compatible = "samsung,s3fwrn82";
>  
>              en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
>              wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>  
> -            status = "okay";
>          };
>      };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>  
>          phy-mode = "gmii";
>  
> -        status = "disabled";
> -
>          fixed-link {
>              speed = <1000>;
>              full-duplex;
> @@ -148,32 +146,24 @@ examples:
>                          reg = <0x1>;
>                          phy-handle = <&phy_port0>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port2: port@2 {
>                          reg = <0x2>;
>                          phy-handle = <&phy_port1>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port3: port@3 {
>                          reg = <0x3>;
>                          phy-handle = <&phy_port2>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port4: port@4 {
>                          reg = <0x4>;
>                          phy-handle = <&phy_port3>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>                  };
>  
> @@ -183,34 +173,29 @@ examples:
>  
>                      interrupt-parent = <&switch10>;
>  
> -                    phy_port0: phy@0 {
> +                    phy_port0: ethernet-phy@0 {
>                          reg = <0x0>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port1: phy@1 {
> +                    phy_port1: ethernet-phy@1 {
>                          reg = <0x1>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port2: phy@2 {
> +                    phy_port2: ethernet-phy@2 {
>                          reg = <0x2>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port3: phy@3 {
> +                    phy_port3: ethernet-phy@3 {
>                          reg = <0x3>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port4: phy@4 {
> +                    phy_port4: ethernet-phy@4 {
>                          reg = <0x4>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>                  };
>              };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>  
>        rt6245@34 {
>          compatible = "richtek,rt6245";
> -        status = "okay";
>          reg = <0x34>;
>          enable-gpios = <&gpio26 2 0>;
>  
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
>        regulator-min-microvolt = <1500000>;
>        regulator-max-microvolt = <3000000>;
>        regulator-always-on;
> -      status = "disabled";
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
>          resets = <&iomcu_rst 0x20 3>;
>          pinctrl-names = "default";
>          pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> -        status = "disabled";
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
>      };
>  
>      pwm: pwm@e0d00000 {
> -        status = "disabled";
>          compatible = "intel,lgm-pwm";
>          reg = <0xe0d00000 0x30>;
>          clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
>          rtc@51 {
>              compatible = "microcrystal,rv3032";
>              reg = <0x51>;
> -            status = "okay";
>              pinctrl-0 = <&rtc_nint_pins>;
>              interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
>              trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
>      soc_ctrl0: soc-controller@f0000000 {
>          compatible = "litex,soc-controller";
>          reg = <0xf0000000 0xc>;
> -        status = "okay";
>      };
>  
>  ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
>        pinctrl-names = "default", "sleep";
>        pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
>        pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> -      status = "okay";
>  
>        sai2a: audio-controller@4400b004 {
>          #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
>          dma-names = "tx";
>          clocks = <&rcc SAI2_K>;
>          clock-names = "sai_ck";
> -        status = "okay";
>        };
>      };
>  
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
>          compatible = "ti,j721e-cpb-audio";
>          model = "j721e-cpb";
>  
> -        status = "okay";
> -
>          ti,cpb-mcasp = <&mcasp10>;
>          ti,cpb-codec = <&pcm3168a_1>;
>  
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
>          compatible = "ti,j721e-cpb-ivi-audio";
>          model = "j721e-cpb-ivi";
>  
> -        status = "okay";
> -
>          ti,cpb-mcasp = <&mcasp10>;
>          ti,cpb-codec = <&pcm3168a_1>;
>  
> -- 
> 2.27.0
>
Mark Brown July 20, 2021, 8:33 p.m. UTC | #5
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).

Acked-by: Mark Brown <broonie@kernel.org>
Philipp Zabel July 21, 2021, 8:32 a.m. UTC | #6
Hi Rob,

On Tue, 2021-07-20 at 11:20 -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).

Is this documented somewhere? If not, should it be? (Maybe in writing-
schema.rst -> Schema Contents -> examples?)
 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -
>  .../bindings/net/intel,dwmac-plat.yaml        |  2 --
>  .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
>  .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
>  .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
>  .../regulator/richtek,rt6245-regulator.yaml   |  1 -
>  .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
>  .../reset/hisilicon,hi3660-reset.yaml         |  1 -
>  .../bindings/reset/intel,rcu-gw.yaml          |  1 -
[...]

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp
Oleksij Rempel July 21, 2021, 11:05 a.m. UTC | #7
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
> 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>


Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>

> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -
>  .../bindings/net/intel,dwmac-plat.yaml        |  2 --
>  .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
>  .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
>  .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
>  .../regulator/richtek,rt6245-regulator.yaml   |  1 -
>  .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
>  .../reset/hisilicon,hi3660-reset.yaml         |  1 -
>  .../bindings/reset/intel,rcu-gw.yaml          |  1 -
>  .../bindings/rtc/microcrystal,rv3032.yaml     |  1 -
>  .../soc/litex/litex,soc-controller.yaml       |  1 -
>  .../bindings/sound/st,stm32-sai.yaml          |  2 --
>  .../bindings/sound/ti,j721e-cpb-audio.yaml    |  2 --
>  .../sound/ti,j721e-cpb-ivi-audio.yaml         |  2 --
>  17 files changed, 5 insertions(+), 45 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
>          phy-names = "phy";
>          pinctrl-names = "default";
>          pinctrl-0 = <&hdmi_pins>;
> -        status = "disabled";
>  
>          ports {
>              #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
>          phy-names = "phy";
>          pinctrl-names = "default";
>          pinctrl-0 = <&hdmi_pins>;
> -        status = "disabled";
>  
>          ports {
>              #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
>              avee-supply = <&ppvarp_lcd>;
>              pp1800-supply = <&pp1800_lcd>;
>              backlight = <&backlight_lcd0>;
> -            status = "okay";
>              port {
>                  panel_in: endpoint {
>                      remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
>          clock-names = "pclk", "wrap", "phy", "axi";
>          power-domains = <&mipi_pd>;
>  
> -        status = "disabled";
> -
>          ports {
>              #address-cells = <1>;
>              #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
>                      power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
>                      resets = <&cpg 513>;
>                      renesas,bonding = <&drif11>;
> -                    status = "disabled";
>              };
>  
>              drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
>          snps,mtl-rx-config = <&mtl_rx_setup>;
>          snps,mtl-tx-config = <&mtl_tx_setup>;
>          snps,tso;
> -        status = "okay";
> -
>          mdio0 {
>              #address-cells = <1>;
>              #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
>      ethernet@c8009000 {
>        compatible = "intel,ixp4xx-ethernet";
>        reg = <0xc8009000 0x1000>;
> -      status = "disabled";
>        queue-rx = <&qmgr 4>;
>        queue-txready = <&qmgr 21>;
>        intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
>      ethernet@c800c000 {
>        compatible = "intel,ixp4xx-ethernet";
>        reg = <0xc800c000 0x1000>;
> -      status = "disabled";
>        queue-rx = <&qmgr 3>;
>        queue-txready = <&qmgr 20>;
>        intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
>    # UART example on Raspberry Pi
>    - |
>      uart0 {
> -        status = "okay";
> -
>          nfc {
>              compatible = "samsung,s3fwrn82";
>  
>              en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
>              wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>  
> -            status = "okay";
>          };
>      };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>  
>          phy-mode = "gmii";
>  
> -        status = "disabled";
> -
>          fixed-link {
>              speed = <1000>;
>              full-duplex;
> @@ -148,32 +146,24 @@ examples:
>                          reg = <0x1>;
>                          phy-handle = <&phy_port0>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port2: port@2 {
>                          reg = <0x2>;
>                          phy-handle = <&phy_port1>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port3: port@3 {
>                          reg = <0x3>;
>                          phy-handle = <&phy_port2>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port4: port@4 {
>                          reg = <0x4>;
>                          phy-handle = <&phy_port3>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>                  };
>  
> @@ -183,34 +173,29 @@ examples:
>  
>                      interrupt-parent = <&switch10>;
>  
> -                    phy_port0: phy@0 {
> +                    phy_port0: ethernet-phy@0 {
>                          reg = <0x0>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port1: phy@1 {
> +                    phy_port1: ethernet-phy@1 {
>                          reg = <0x1>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port2: phy@2 {
> +                    phy_port2: ethernet-phy@2 {
>                          reg = <0x2>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port3: phy@3 {
> +                    phy_port3: ethernet-phy@3 {
>                          reg = <0x3>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port4: phy@4 {
> +                    phy_port4: ethernet-phy@4 {
>                          reg = <0x4>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>                  };
>              };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>  
>        rt6245@34 {
>          compatible = "richtek,rt6245";
> -        status = "okay";
>          reg = <0x34>;
>          enable-gpios = <&gpio26 2 0>;
>  
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
>        regulator-min-microvolt = <1500000>;
>        regulator-max-microvolt = <3000000>;
>        regulator-always-on;
> -      status = "disabled";
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
>          resets = <&iomcu_rst 0x20 3>;
>          pinctrl-names = "default";
>          pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> -        status = "disabled";
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
>      };
>  
>      pwm: pwm@e0d00000 {
> -        status = "disabled";
>          compatible = "intel,lgm-pwm";
>          reg = <0xe0d00000 0x30>;
>          clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
>          rtc@51 {
>              compatible = "microcrystal,rv3032";
>              reg = <0x51>;
> -            status = "okay";
>              pinctrl-0 = <&rtc_nint_pins>;
>              interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
>              trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
>      soc_ctrl0: soc-controller@f0000000 {
>          compatible = "litex,soc-controller";
>          reg = <0xf0000000 0xc>;
> -        status = "okay";
>      };
>  
>  ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
>        pinctrl-names = "default", "sleep";
>        pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
>        pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> -      status = "okay";
>  
>        sai2a: audio-controller@4400b004 {
>          #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
>          dma-names = "tx";
>          clocks = <&rcc SAI2_K>;
>          clock-names = "sai_ck";
> -        status = "okay";
>        };
>      };
>  
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
>          compatible = "ti,j721e-cpb-audio";
>          model = "j721e-cpb";
>  
> -        status = "okay";
> -
>          ti,cpb-mcasp = <&mcasp10>;
>          ti,cpb-codec = <&pcm3168a_1>;
>  
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
>          compatible = "ti,j721e-cpb-ivi-audio";
>          model = "j721e-cpb-ivi";
>  
> -        status = "okay";
> -
>          ti,cpb-mcasp = <&mcasp10>;
>          ti,cpb-codec = <&pcm3168a_1>;
>  
> -- 
> 2.27.0
> 
>
Rob Herring July 21, 2021, 1:49 p.m. UTC | #8
On Wed, Jul 21, 2021 at 2:33 AM Philipp Zabel <p.zabel@pengutronix.de> wrote:
>
> Hi Rob,
>
> On Tue, 2021-07-20 at 11:20 -0600, Rob Herring wrote:
> > There's no reason to have "status" properties in examples. "okay" is the
> > default, and "disabled" turns off some schema checks ('required'
> > specifically).
>
> Is this documented somewhere? If not, should it be? (Maybe in writing-
> schema.rst -> Schema Contents -> examples?)

I don't think it is. I'm writing a schema for it which works for both
those that read documentation and those that don't.

Rob
Linus Walleij July 21, 2021, 2:26 p.m. UTC | #9
On Tue, Jul 20, 2021 at 7:20 PM Rob Herring <robh@kernel.org> wrote:

> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).

All of mine are mistakes anyway.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Thanks for fixing this up.

Yours,
Linus Walleij
Rob Herring July 23, 2021, 9:18 p.m. UTC | #10
On Tue, 20 Jul 2021 11:20:25 -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
> 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <cy_huang@richtek.com>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <eswara.kota@linux.intel.com>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <olivier.moysan@st.com>
> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-rtc@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -
>  .../bindings/net/intel,dwmac-plat.yaml        |  2 --
>  .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
>  .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
>  .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
>  .../regulator/richtek,rt6245-regulator.yaml   |  1 -
>  .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
>  .../reset/hisilicon,hi3660-reset.yaml         |  1 -
>  .../bindings/reset/intel,rcu-gw.yaml          |  1 -
>  .../bindings/rtc/microcrystal,rv3032.yaml     |  1 -
>  .../soc/litex/litex,soc-controller.yaml       |  1 -
>  .../bindings/sound/st,stm32-sai.yaml          |  2 --
>  .../bindings/sound/ti,j721e-cpb-audio.yaml    |  2 --
>  .../sound/ti,j721e-cpb-ivi-audio.yaml         |  2 --
>  17 files changed, 5 insertions(+), 45 deletions(-)
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 5d42d36608d9..4951b5ef5c6a 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -174,7 +174,6 @@  examples:
         phy-names = "phy";
         pinctrl-names = "default";
         pinctrl-0 = <&hdmi_pins>;
-        status = "disabled";
 
         ports {
             #address-cells = <1>;
@@ -233,7 +232,6 @@  examples:
         phy-names = "phy";
         pinctrl-names = "default";
         pinctrl-0 = <&hdmi_pins>;
-        status = "disabled";
 
         ports {
             #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index 38bc1d1b511e..b87a2e28c866 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -70,7 +70,6 @@  examples:
             avee-supply = <&ppvarp_lcd>;
             pp1800-supply = <&pp1800_lcd>;
             backlight = <&backlight_lcd0>;
-            status = "okay";
             port {
                 panel_in: endpoint {
                     remote-endpoint = <&dsi_out>;
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 7c09eec78ce5..877183cf4278 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -200,8 +200,6 @@  examples:
         clock-names = "pclk", "wrap", "phy", "axi";
         power-domains = <&mipi_pd>;
 
-        status = "disabled";
-
         ports {
             #address-cells = <1>;
             #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index 2867d11fe156..9403b235e976 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -242,7 +242,6 @@  examples:
                     power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                     resets = <&cpg 513>;
                     renesas,bonding = <&drif11>;
-                    status = "disabled";
             };
 
             drif11: rif@e6f70000 {
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index c1948ce00081..79fa04f5e40d 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -116,8 +116,6 @@  examples:
         snps,mtl-rx-config = <&mtl_rx_setup>;
         snps,mtl-tx-config = <&mtl_tx_setup>;
         snps,tso;
-        status = "okay";
-
         mdio0 {
             #address-cells = <1>;
             #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
index f2e91d1bf7d7..378ed2d3b003 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -71,7 +71,6 @@  examples:
     ethernet@c8009000 {
       compatible = "intel,ixp4xx-ethernet";
       reg = <0xc8009000 0x1000>;
-      status = "disabled";
       queue-rx = <&qmgr 4>;
       queue-txready = <&qmgr 21>;
       intel,npe-handle = <&npe 1>;
@@ -82,7 +81,6 @@  examples:
     ethernet@c800c000 {
       compatible = "intel,ixp4xx-ethernet";
       reg = <0xc800c000 0x1000>;
-      status = "disabled";
       queue-rx = <&qmgr 3>;
       queue-txready = <&qmgr 20>;
       intel,npe-handle = <&npe 2>;
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index 081742c2b726..64995cbb0f97 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -90,14 +90,11 @@  examples:
   # UART example on Raspberry Pi
   - |
     uart0 {
-        status = "okay";
-
         nfc {
             compatible = "samsung,s3fwrn82";
 
             en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
             wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
 
-            status = "okay";
         };
     };
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
index f0db22645d73..cf4d35edaa1b 100644
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -101,8 +101,6 @@  examples:
 
         phy-mode = "gmii";
 
-        status = "disabled";
-
         fixed-link {
             speed = <1000>;
             full-duplex;
@@ -148,32 +146,24 @@  examples:
                         reg = <0x1>;
                         phy-handle = <&phy_port0>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
 
                     switch_port2: port@2 {
                         reg = <0x2>;
                         phy-handle = <&phy_port1>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
 
                     switch_port3: port@3 {
                         reg = <0x3>;
                         phy-handle = <&phy_port2>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
 
                     switch_port4: port@4 {
                         reg = <0x4>;
                         phy-handle = <&phy_port3>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
                 };
 
@@ -183,34 +173,29 @@  examples:
 
                     interrupt-parent = <&switch10>;
 
-                    phy_port0: phy@0 {
+                    phy_port0: ethernet-phy@0 {
                         reg = <0x0>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port1: phy@1 {
+                    phy_port1: ethernet-phy@1 {
                         reg = <0x1>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port2: phy@2 {
+                    phy_port2: ethernet-phy@2 {
                         reg = <0x2>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port3: phy@3 {
+                    phy_port3: ethernet-phy@3 {
                         reg = <0x3>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port4: phy@4 {
+                    phy_port4: ethernet-phy@4 {
                         reg = <0x4>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
                 };
             };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
index 796ceac87445..e983d0e70c9b 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -77,7 +77,6 @@  examples:
 
       rt6245@34 {
         compatible = "richtek,rt6245";
-        status = "okay";
         reg = <0x34>;
         enable-gpios = <&gpio26 2 0>;
 
diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
index 6f45582c914e..dd7a2f92634c 100644
--- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -39,6 +39,5 @@  examples:
       regulator-min-microvolt = <1500000>;
       regulator-max-microvolt = <3000000>;
       regulator-always-on;
-      status = "disabled";
     };
 ...
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
index 9bf40952e5b7..b0c41ab1a746 100644
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
@@ -72,6 +72,5 @@  examples:
         resets = <&iomcu_rst 0x20 3>;
         pinctrl-names = "default";
         pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
-        status = "disabled";
     };
 ...
diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
index 6b2d56cc3f38..13bf6bb3f097 100644
--- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -57,7 +57,6 @@  examples:
     };
 
     pwm: pwm@e0d00000 {
-        status = "disabled";
         compatible = "intel,lgm-pwm";
         reg = <0xe0d00000 0x30>;
         clocks = <&cgu0 1>;
diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
index a2c55303810d..9593840a4a2b 100644
--- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
@@ -53,7 +53,6 @@  examples:
         rtc@51 {
             compatible = "microcrystal,rv3032";
             reg = <0x51>;
-            status = "okay";
             pinctrl-0 = <&rtc_nint_pins>;
             interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
             trickle-resistor-ohms = <7000>;
diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
index c8b57c7fd08c..ecae9fa8561b 100644
--- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
+++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
@@ -35,7 +35,6 @@  examples:
     soc_ctrl0: soc-controller@f0000000 {
         compatible = "litex,soc-controller";
         reg = <0xf0000000 0xc>;
-        status = "okay";
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 06e83461705c..f97132400bb6 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -180,7 +180,6 @@  examples:
       pinctrl-names = "default", "sleep";
       pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
       pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
-      status = "okay";
 
       sai2a: audio-controller@4400b004 {
         #sound-dai-cells = <0>;
@@ -190,7 +189,6 @@  examples:
         dma-names = "tx";
         clocks = <&rcc SAI2_K>;
         clock-names = "sai_ck";
-        status = "okay";
       };
     };
 
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
index ec06789b21df..6806f53a4aed 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
@@ -127,8 +127,6 @@  examples:
         compatible = "ti,j721e-cpb-audio";
         model = "j721e-cpb";
 
-        status = "okay";
-
         ti,cpb-mcasp = <&mcasp10>;
         ti,cpb-codec = <&pcm3168a_1>;
 
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
index ee9f960de36b..859d369c71e2 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
@@ -119,8 +119,6 @@  examples:
         compatible = "ti,j721e-cpb-ivi-audio";
         model = "j721e-cpb-ivi";
 
-        status = "okay";
-
         ti,cpb-mcasp = <&mcasp10>;
         ti,cpb-codec = <&pcm3168a_1>;