@@ -74,6 +74,7 @@ enum {
#define BYT_RT5640_MCLK_25MHZ BIT(23)
#define BYT_RT5640_NO_SPEAKERS BIT(24)
#define BYT_RT5640_LINEOUT BIT(25)
+#define BYT_RT5640_LINEOUT_AS_HP2 BIT(26)
#define BYTCR_INPUT_DEFAULTS \
(BYT_RT5640_IN3_MAP | \
@@ -142,6 +143,8 @@ static void log_quirks(struct device *dev)
dev_info(dev, "quirk NO_SPEAKERS enabled\n");
if (byt_rt5640_quirk & BYT_RT5640_LINEOUT)
dev_info(dev, "quirk LINEOUT enabled\n");
+ if (byt_rt5640_quirk & BYT_RT5640_LINEOUT_AS_HP2)
+ dev_info(dev, "quirk LINEOUT_AS_HP2 enabled\n");
if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC)
dev_info(dev, "quirk DIFF_MIC enabled\n");
if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) {
@@ -287,12 +290,39 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
return 0;
}
+static int byt_rt5640_event_lineout(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ unsigned int gpio_ctrl3_val = RT5640_GP1_PF_OUT;
+ struct snd_soc_dai *codec_dai;
+
+ if (!(byt_rt5640_quirk & BYT_RT5640_LINEOUT_AS_HP2))
+ return 0;
+
+ /*
+ * On devices which use line-out as a second headphones output,
+ * the codec's GPIO1 pin is used to enable an external HP-amp.
+ */
+
+ codec_dai = byt_rt5640_get_codec_dai(w->dapm);
+ if (!codec_dai)
+ return -EIO;
+
+ if (SND_SOC_DAPM_EVENT_ON(event))
+ gpio_ctrl3_val |= RT5640_GP1_OUT_HI;
+
+ snd_soc_component_update_bits(codec_dai->component, RT5640_GPIO_CTRL3,
+ RT5640_GP1_PF_MASK | RT5640_GP1_OUT_MASK, gpio_ctrl3_val);
+
+ return 0;
+}
+
static const struct snd_soc_dapm_widget byt_rt5640_widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("Internal Mic", NULL),
SND_SOC_DAPM_SPK("Speaker", NULL),
- SND_SOC_DAPM_LINE("Line Out", NULL),
+ SND_SOC_DAPM_LINE("Line Out", byt_rt5640_event_lineout),
SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
platform_clock_control, SND_SOC_DAPM_PRE_PMU |
SND_SOC_DAPM_POST_PMD),
@@ -1480,8 +1510,12 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
spk_type = "stereo";
}
- if (byt_rt5640_quirk & BYT_RT5640_LINEOUT)
- lineout_string = " cfg-lineout:1";
+ if (byt_rt5640_quirk & BYT_RT5640_LINEOUT) {
+ if (byt_rt5640_quirk & BYT_RT5640_LINEOUT_AS_HP2)
+ lineout_string = " cfg-hp2:lineout";
+ else
+ lineout_string = " cfg-lineout:1";
+ }
snprintf(byt_rt5640_components, sizeof(byt_rt5640_components),
"cfg-spk:%d cfg-mic:%s aif:%d%s", cfg_spk,
Some devices (HP Elitepad 1000 G2) have a second headphones output (1 on the dock, 2nd on the tablet itself) which is implemented through the line-out output of the codec combined with an external hp-amp which gets enabled through the codec's GPIO1 pin. Add support for this through a new BYT_RT5640_LINEOUT_AS_HP2 quirk, note users are expected to use this combined with the BYT_RT5640_LINEOUT quirk. If that quirk is not set the new quirk is ignored. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: - Only set lineout_string if BYT_RT5640_LINEOUT is set, since BYT_RT5640_LINEOUT_AS_HP2 only works if the lineout is enabled in the first place --- sound/soc/intel/boards/bytcr_rt5640.c | 40 +++++++++++++++++++++++++-- 1 file changed, 37 insertions(+), 3 deletions(-)