@@ -18,6 +18,8 @@
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <sound/pcm.h>
@@ -76,6 +78,7 @@ enum {
#define BYT_RT5640_LINEOUT BIT(25)
#define BYT_RT5640_LINEOUT_AS_HP2 BIT(26)
#define BYT_RT5640_HSMIC2_ON_IN1 BIT(27)
+#define BYT_RT5640_JD_HP_ELITEP_1000G2 BIT(28)
#define BYTCR_INPUT_DEFAULTS \
(BYT_RT5640_IN3_MAP | \
@@ -89,6 +92,8 @@ enum {
struct byt_rt5640_private {
struct snd_soc_jack jack;
+ struct snd_soc_jack jack2;
+ struct gpio_desc *hsmic_detect;
struct clk *mclk;
struct device *codec_dev;
};
@@ -141,6 +146,8 @@ static void log_quirks(struct device *dev)
}
if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV)
dev_info(dev, "quirk JD_NOT_INV enabled\n");
+ if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2)
+ dev_info(dev, "quirk JD_HP_ELITEPAD_1000G2 enabled\n");
if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER)
dev_info(dev, "quirk MONO_SPEAKER enabled\n");
if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)
@@ -446,6 +453,75 @@ static struct snd_soc_jack_pin rt5640_pins[] = {
},
};
+static struct snd_soc_jack_pin rt5640_pins2[] = {
+ {
+ /* The 2nd headset jack uses lineout with an external HP-amp */
+ .pin = "Line Out",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ {
+ .pin = "Headset Mic 2",
+ .mask = SND_JACK_MICROPHONE,
+ },
+};
+
+struct snd_soc_jack_gpio rt5640_jack_gpio = {
+ .name = "hp-detect",
+ .report = SND_JACK_HEADSET,
+ .invert = true,
+ .debounce_time = 200,
+};
+
+struct snd_soc_jack_gpio rt5640_jack2_gpio = {
+ .name = "hp2-detect",
+ .report = SND_JACK_HEADSET,
+ .invert = true,
+ .debounce_time = 200,
+};
+
+static const struct acpi_gpio_params acpi_gpio0 = { 0, 0, false };
+static const struct acpi_gpio_params acpi_gpio1 = { 1, 0, false };
+static const struct acpi_gpio_params acpi_gpio2 = { 2, 0, false };
+
+static const struct acpi_gpio_mapping byt_rt5640_hp_elitepad_1000g2_gpios[] = {
+ { "hp-detect-gpios", &acpi_gpio0, 1, },
+ { "headset-mic-detect-gpios", &acpi_gpio1, 1, },
+ { "hp2-detect-gpios", &acpi_gpio2, 1, },
+ { },
+};
+
+int byt_rt5640_hp_elitepad_1000g2_jack1_check(void *data)
+{
+ struct byt_rt5640_private *priv = data;
+ int jack_status, mic_status;
+
+ jack_status = gpiod_get_value_cansleep(rt5640_jack_gpio.desc);
+ if (jack_status)
+ return 0;
+
+ mic_status = gpiod_get_value_cansleep(priv->hsmic_detect);
+ if (mic_status)
+ return SND_JACK_HEADPHONE;
+ else
+ return SND_JACK_HEADSET;
+}
+
+int byt_rt5640_hp_elitepad_1000g2_jack2_check(void *data)
+{
+ struct snd_soc_component *component = data;
+ int jack_status, report;
+
+ jack_status = gpiod_get_value_cansleep(rt5640_jack2_gpio.desc);
+ if (jack_status)
+ return 0;
+
+ rt5640_enable_micbias1_for_ovcd(component);
+ report = rt5640_detect_headset(component, rt5640_jack2_gpio.desc);
+ rt5640_disable_micbias1_for_ovcd(component);
+
+ return report;
+}
+
static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -657,7 +733,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_MCLK_EN |
BYT_RT5640_LINEOUT |
BYT_RT5640_LINEOUT_AS_HP2 |
- BYT_RT5640_HSMIC2_ON_IN1),
+ BYT_RT5640_HSMIC2_ON_IN1 |
+ BYT_RT5640_JD_HP_ELITEP_1000G2),
},
{ /* HP Pavilion x2 10-k0XX, 10-n0XX */
.matches = {
@@ -1180,9 +1257,53 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
snd_soc_component_set_jack(component, &priv->jack, NULL);
}
+ if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) {
+ ret = snd_soc_card_jack_new(card, "Headset",
+ SND_JACK_HEADSET,
+ &priv->jack, rt5640_pins,
+ ARRAY_SIZE(rt5640_pins));
+ if (ret)
+ return ret;
+
+ ret = snd_soc_card_jack_new(card, "Headset 2",
+ SND_JACK_HEADSET,
+ &priv->jack2, rt5640_pins2,
+ ARRAY_SIZE(rt5640_pins2));
+ if (ret)
+ return ret;
+
+ rt5640_jack_gpio.data = priv;
+ rt5640_jack_gpio.gpiod_dev = priv->codec_dev;
+ rt5640_jack_gpio.jack_status_check = byt_rt5640_hp_elitepad_1000g2_jack1_check;
+ ret = snd_soc_jack_add_gpios(&priv->jack, 1, &rt5640_jack_gpio);
+ if (ret)
+ return ret;
+
+ rt5640_set_ovcd_params(component);
+ rt5640_jack2_gpio.data = component;
+ rt5640_jack2_gpio.gpiod_dev = priv->codec_dev;
+ rt5640_jack2_gpio.jack_status_check = byt_rt5640_hp_elitepad_1000g2_jack2_check;
+ ret = snd_soc_jack_add_gpios(&priv->jack2, 1, &rt5640_jack2_gpio);
+ if (ret) {
+ snd_soc_jack_free_gpios(&priv->jack, 1, &rt5640_jack_gpio);
+ return ret;
+ }
+ }
+
return 0;
}
+static void byt_rt5640_exit(struct snd_soc_pcm_runtime *runtime)
+{
+ struct snd_soc_card *card = runtime->card;
+ struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
+
+ if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) {
+ snd_soc_jack_free_gpios(&priv->jack2, 1, &rt5640_jack2_gpio);
+ snd_soc_jack_free_gpios(&priv->jack, 1, &rt5640_jack_gpio);
+ }
+}
+
static int byt_rt5640_codec_fixup(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hw_params *params)
{
@@ -1295,6 +1416,7 @@ static struct snd_soc_dai_link byt_rt5640_dais[] = {
.dpcm_playback = 1,
.dpcm_capture = 1,
.init = byt_rt5640_init,
+ .exit = byt_rt5640_exit,
.ops = &byt_rt5640_be_ssp2_ops,
SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform),
},
@@ -1498,10 +1620,24 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
priv->codec_dev = get_device(codec_dev);
+ if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2) {
+ acpi_dev_add_driver_gpios(ACPI_COMPANION(priv->codec_dev),
+ byt_rt5640_hp_elitepad_1000g2_gpios);
+
+ priv->hsmic_detect = devm_fwnode_gpiod_get(&pdev->dev, codec_dev->fwnode,
+ "headset-mic-detect", GPIOD_IN,
+ "headset-mic-detect");
+ if (IS_ERR(priv->hsmic_detect)) {
+ ret_val = PTR_ERR(priv->hsmic_detect);
+ dev_err_probe(&pdev->dev, ret_val, "getting hsmic-detect GPIO\n");
+ goto err_device;
+ }
+ }
+
/* Must be called before register_card, also see declaration comment. */
ret_val = byt_rt5640_add_codec_device_props(codec_dev, priv);
if (ret_val)
- goto err_device;
+ goto err_remove_gpios;
log_quirks(&pdev->dev);
@@ -1605,6 +1741,9 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
err:
device_remove_software_node(priv->codec_dev);
+err_remove_gpios:
+ if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2)
+ acpi_dev_remove_driver_gpios(ACPI_COMPANION(priv->codec_dev));
err_device:
put_device(priv->codec_dev);
return ret_val;
@@ -1615,6 +1754,9 @@ static int snd_byt_rt5640_mc_remove(struct platform_device *pdev)
struct snd_soc_card *card = platform_get_drvdata(pdev);
struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
+ if (byt_rt5640_quirk & BYT_RT5640_JD_HP_ELITEP_1000G2)
+ acpi_dev_remove_driver_gpios(ACPI_COMPANION(priv->codec_dev));
+
device_remove_software_node(priv->codec_dev);
put_device(priv->codec_dev);
return 0;
The HP Elitepad 1000 G2 tablet has 2 headset jacks: 1. on the dock which uses the output of the codecs built-in HP-amp + the standard IN2 input which is always used with the headset-jack. 2. on the tablet itself, this uses the line-out of the codec + an external HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for the headset-mic. The codec's GPIO1 is also its only IRQ output pin, so this means that the codec's IRQ cannot be used on this tablet. Instead the jack-detect is connected directly to GPIOs on the main SoC. The dock has a helper chip which also detects if a headset-mic is present or not, so there are 2 GPIOs for the jack-detect status of the dock. The tablet jack uses a single GPIO which indicates if a jack is present or not. Differentiating between headphones vs a headset on the tablet jack is done by using the usual mic-bias over-current-detection mechanism. Add support for this unique setup, this support gets enabled on this tablet through a new BYT_RT5640_JD_HP_ELITEP_1000G2 quirk. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415 Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: - Only call acpi_dev_add/remove_driver_gpios() once (only call them during snd_byt_rt5640_mc_probe/remove) - Use new "Headset Mic 2" DAPM pin switch to report mic presence on the 2nd jack --- sound/soc/intel/boards/bytcr_rt5640.c | 146 +++++++++++++++++++++++++- 1 file changed, 144 insertions(+), 2 deletions(-)