@@ -435,10 +435,36 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
0x3f, 1, mixer_tlv)
};
+static int cs42l42_hp_adc_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component);
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ cs42l42->hp_adc_up_pending = true;
+ break;
+ case SND_SOC_DAPM_POST_PMU:
+ /* Only need one delay if HP and ADC are both powering-up */
+ if (cs42l42->hp_adc_up_pending) {
+ usleep_range(CS42L42_HP_ADC_EN_TIME_US,
+ CS42L42_HP_ADC_EN_TIME_US + 1000);
+ cs42l42->hp_adc_up_pending = false;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
static const struct snd_soc_dapm_widget cs42l42_dapm_widgets[] = {
/* Playback Path */
SND_SOC_DAPM_OUTPUT("HP"),
- SND_SOC_DAPM_DAC("DAC", NULL, CS42L42_PWR_CTL1, CS42L42_HP_PDN_SHIFT, 1),
+ SND_SOC_DAPM_DAC_E("DAC", NULL, CS42L42_PWR_CTL1, CS42L42_HP_PDN_SHIFT, 1,
+ cs42l42_hp_adc_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_MIXER("MIXER", CS42L42_PWR_CTL1, CS42L42_MIXER_PDN_SHIFT, 1, NULL, 0),
SND_SOC_DAPM_AIF_IN("SDIN1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("SDIN2", NULL, 1, SND_SOC_NOPM, 0, 0),
@@ -448,7 +474,8 @@ static const struct snd_soc_dapm_widget cs42l42_dapm_widgets[] = {
/* Capture Path */
SND_SOC_DAPM_INPUT("HS"),
- SND_SOC_DAPM_ADC("ADC", NULL, CS42L42_PWR_CTL1, CS42L42_ADC_PDN_SHIFT, 1),
+ SND_SOC_DAPM_ADC_E("ADC", NULL, CS42L42_PWR_CTL1, CS42L42_ADC_PDN_SHIFT, 1,
+ cs42l42_hp_adc_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_AIF_OUT("SDOUT1", NULL, 0, CS42L42_ASP_TX_CH_EN, CS42L42_ASP_TX0_CH1_SHIFT, 0),
SND_SOC_DAPM_AIF_OUT("SDOUT2", NULL, 1, CS42L42_ASP_TX_CH_EN, CS42L42_ASP_TX0_CH2_SHIFT, 0),
@@ -820,6 +820,7 @@
#define CS42L42_CLOCK_SWITCH_DELAY_US 150
#define CS42L42_PLL_LOCK_POLL_US 250
#define CS42L42_PLL_LOCK_TIMEOUT_US 1250
+#define CS42L42_HP_ADC_EN_TIME_US 20000
static const char *const cs42l42_supply_names[CS42L42_NUM_SUPPLIES] = {
"VP",
@@ -853,6 +854,7 @@ struct cs42l42_private {
u8 hs_bias_ramp_time;
u8 hs_bias_sense_en;
u8 stream_use;
+ bool hp_adc_up_pending;
};
#endif /* __CS42L42_H__ */
After enabling the HP or ADC by writing the corresponding PDN=0, it takes around 20 milliseconds for it to power up and the midrail supply to be stable. Add this wait into a DAPM widget callback. If HP and ADC are both powering up in a DAPM sequence, there's no need to do the wait twice. The widget will perform one wait in the POST_PMU if there was a PRE_PMU for one or both. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> --- sound/soc/codecs/cs42l42.c | 31 +++++++++++++++++++++++++++++-- sound/soc/codecs/cs42l42.h | 2 ++ 2 files changed, 31 insertions(+), 2 deletions(-)