@@ -2419,7 +2419,8 @@ static void rt5640_disable_jack_detect(struct snd_soc_component *component)
}
static void rt5640_enable_jack_detect(struct snd_soc_component *component,
- struct snd_soc_jack *jack)
+ struct snd_soc_jack *jack,
+ struct rt5640_set_jack_data *jack_data)
{
struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component);
int ret;
@@ -2463,6 +2464,9 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
rt5640_enable_micbias1_ovcd_irq(component);
}
+ if (jack_data && jack_data->codec_irq_override)
+ rt5640->irq = jack_data->codec_irq_override;
+
ret = request_irq(rt5640->irq, rt5640_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"rt5640", rt5640);
@@ -2482,7 +2486,7 @@ static int rt5640_set_jack(struct snd_soc_component *component,
struct snd_soc_jack *jack, void *data)
{
if (jack)
- rt5640_enable_jack_detect(component, jack);
+ rt5640_enable_jack_detect(component, jack, data);
else
rt5640_disable_jack_detect(component);
@@ -2153,6 +2153,10 @@ struct rt5640_priv {
unsigned int ovcd_sf;
};
+struct rt5640_set_jack_data {
+ int codec_irq_override;
+};
+
int rt5640_dmic_enable(struct snd_soc_component *component,
bool dmic1_data_pin, bool dmic2_data_pin);
int rt5640_sel_asrc_clk_src(struct snd_soc_component *component,
On some boards where the firmware/fwnode information is in essence read-only (x86 + ACPI boards) the i2c_client for the codec may contain the wrong IRQ or no IRQ at all. Since we only request the IRQ once snd_soc_component_set_jack() gets called, allow machine drivers to override the IRQ with the proper one through the data parameter to snd_soc_component_set_jack(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- sound/soc/codecs/rt5640.c | 8 ++++++-- sound/soc/codecs/rt5640.h | 4 ++++ 2 files changed, 10 insertions(+), 2 deletions(-)