diff mbox series

[RFC,v2,31/39] sound: add HAS_IOPORT dependencies

Message ID 20220429135108.2781579-57-schnelle@linux.ibm.com (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Niklas Schnelle April 29, 2022, 1:50 p.m. UTC
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them. For SND_OPL3_LIB this adds its first
dependency so drivers currently selecting it unconditionally need to
depend on it instead.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 sound/drivers/Kconfig |  5 ++++
 sound/isa/Kconfig     | 44 ++++++++++++++---------------
 sound/pci/Kconfig     | 64 +++++++++++++++++++++++++++++--------------
 3 files changed, 70 insertions(+), 43 deletions(-)

Comments

Takashi Iwai May 9, 2022, 8:53 a.m. UTC | #1
On Fri, 29 Apr 2022 15:50:54 +0200,
Niklas Schnelle wrote:
> 
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them. For SND_OPL3_LIB this adds its first
> dependency so drivers currently selecting it unconditionally need to
> depend on it instead.
> 
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> ---
>  sound/drivers/Kconfig |  5 ++++
>  sound/isa/Kconfig     | 44 ++++++++++++++---------------
>  sound/pci/Kconfig     | 64 +++++++++++++++++++++++++++++--------------
>  3 files changed, 70 insertions(+), 43 deletions(-)
> 
> diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
> index ca4cdf666f82..4d250e619786 100644
> --- a/sound/drivers/Kconfig
> +++ b/sound/drivers/Kconfig
> @@ -1,10 +1,12 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  config SND_MPU401_UART
>  	tristate
> +	depends on HAS_IOPORT
>  	select SND_RAWMIDI
>  
>  config SND_OPL3_LIB
>  	tristate
> +	depends on HAS_IOPPORT
>  	select SND_TIMER
>  	select SND_HWDEP
>  	select SND_SEQ_DEVICE if SND_SEQUENCER != n

Both of those are the items to be reverse-selected, so cannot fulfill
the dependency with depends-on.  That is, the items that select those
should have the dependency on HAS_IOPORT instead.

That is, a change like below:

> --- a/sound/isa/Kconfig
> +++ b/sound/isa/Kconfig
> @@ -31,7 +31,7 @@ if SND_ISA
>  
>  config SND_ADLIB
>  	tristate "AdLib FM card"
> -	select SND_OPL3_LIB
> +	depends on SND_OPL3_LIB

... won't work.  CONFIG_SND_OPL3_LIB is not enabled by itself but only
to be selected.


thanks,

Takashi
Arnd Bergmann May 9, 2022, 9:20 a.m. UTC | #2
On Mon, May 9, 2022 at 10:53 AM Takashi Iwai <tiwai@suse.de> wrote:
> On Fri, 29 Apr 2022 15:50:54 +0200, Niklas Schnelle wrote:

> >
> >  config SND_OPL3_LIB
> >       tristate
> > +     depends on HAS_IOPPORT
> >       select SND_TIMER
> >       select SND_HWDEP
> >       select SND_SEQ_DEVICE if SND_SEQUENCER != n
>
> Both of those are the items to be reverse-selected, so cannot fulfill
> the dependency with depends-on.  That is, the items that select those
> should have the dependency on HAS_IOPORT instead.
>
> That is, a change like below:
>
> > --- a/sound/isa/Kconfig
> > +++ b/sound/isa/Kconfig
> > @@ -31,7 +31,7 @@ if SND_ISA
> >
> >  config SND_ADLIB
> >       tristate "AdLib FM card"
> > -     select SND_OPL3_LIB
> > +     depends on SND_OPL3_LIB
>
> ... won't work.  CONFIG_SND_OPL3_LIB is not enabled by itself but only
> to be selected.

Right, I missed that in my review. Not sure if this was a mistake in
my original patch or if it started in a later version.

I think for the ISA drivers, I would still add 'depends on HAS_IOPORT'
to both CONFIG_SND_ISA and CONFIG_SND_OPL3_LIB if only to
make it easier to understand, even though CONFIG_ISA requires
HAS_IOPORT already, and CONFIG_SND_OPL3_LIB cannot be
selected by itself.

For the PCI drivers, I think we need to add the same dependency
on anything that either selects SND_OPL3_LIB or calls inb()/outb()
directly.

       Arnd
Takashi Iwai May 9, 2022, 10:07 a.m. UTC | #3
On Mon, 09 May 2022 11:20:33 +0200,
Arnd Bergmann wrote:
> 
> On Mon, May 9, 2022 at 10:53 AM Takashi Iwai <tiwai@suse.de> wrote:
> > On Fri, 29 Apr 2022 15:50:54 +0200, Niklas Schnelle wrote:
> 
> > >
> > >  config SND_OPL3_LIB
> > >       tristate
> > > +     depends on HAS_IOPPORT
> > >       select SND_TIMER
> > >       select SND_HWDEP
> > >       select SND_SEQ_DEVICE if SND_SEQUENCER != n
> >
> > Both of those are the items to be reverse-selected, so cannot fulfill
> > the dependency with depends-on.  That is, the items that select those
> > should have the dependency on HAS_IOPORT instead.
> >
> > That is, a change like below:
> >
> > > --- a/sound/isa/Kconfig
> > > +++ b/sound/isa/Kconfig
> > > @@ -31,7 +31,7 @@ if SND_ISA
> > >
> > >  config SND_ADLIB
> > >       tristate "AdLib FM card"
> > > -     select SND_OPL3_LIB
> > > +     depends on SND_OPL3_LIB
> >
> > ... won't work.  CONFIG_SND_OPL3_LIB is not enabled by itself but only
> > to be selected.
> 
> Right, I missed that in my review. Not sure if this was a mistake in
> my original patch or if it started in a later version.
> 
> I think for the ISA drivers, I would still add 'depends on HAS_IOPORT'
> to both CONFIG_SND_ISA and CONFIG_SND_OPL3_LIB if only to
> make it easier to understand, even though CONFIG_ISA requires
> HAS_IOPORT already, and CONFIG_SND_OPL3_LIB cannot be
> selected by itself.

Yes, that makes sense.

> For the PCI drivers, I think we need to add the same dependency
> on anything that either selects SND_OPL3_LIB or calls inb()/outb()
> directly.

Agreed.


thanks,

Takashi
Niklas Schnelle May 9, 2022, 12:14 p.m. UTC | #4
On Mon, 2022-05-09 at 12:07 +0200, Takashi Iwai wrote:
> On Mon, 09 May 2022 11:20:33 +0200,
> Arnd Bergmann wrote:
> > On Mon, May 9, 2022 at 10:53 AM Takashi Iwai <tiwai@suse.de> wrote:
> > > On Fri, 29 Apr 2022 15:50:54 +0200, Niklas Schnelle wrote:
> > > >  config SND_OPL3_LIB
> > > >       tristate
> > > > +     depends on HAS_IOPPORT
> > > >       select SND_TIMER
> > > >       select SND_HWDEP
> > > >       select SND_SEQ_DEVICE if SND_SEQUENCER != n
> > > 
> > > Both of those are the items to be reverse-selected, so cannot fulfill
> > > the dependency with depends-on.  That is, the items that select those
> > > should have the dependency on HAS_IOPORT instead.
> > > 
> > > That is, a change like below:
> > > 
> > > > --- a/sound/isa/Kconfig
> > > > +++ b/sound/isa/Kconfig
> > > > @@ -31,7 +31,7 @@ if SND_ISA
> > > > 
> > > >  config SND_ADLIB
> > > >       tristate "AdLib FM card"
> > > > -     select SND_OPL3_LIB
> > > > +     depends on SND_OPL3_LIB
> > > 
> > > ... won't work.  CONFIG_SND_OPL3_LIB is not enabled by itself but only
> > > to be selected.
> > 
> > Right, I missed that in my review. Not sure if this was a mistake in
> > my original patch or if it started in a later version.

I added this part recently I think even after your review so the fault
is entirely mine.

> > 
> > I think for the ISA drivers, I would still add 'depends on HAS_IOPORT'
> > to both CONFIG_SND_ISA and CONFIG_SND_OPL3_LIB if only to
> > make it easier to understand, even though CONFIG_ISA requires
> > HAS_IOPORT already, and CONFIG_SND_OPL3_LIB cannot be
> > selected by itself.
> 
> Yes, that makes sense.

Good, incorporating this now and it looks like this works.

> 
> > For the PCI drivers, I think we need to add the same dependency
> > on anything that either selects SND_OPL3_LIB or calls inb()/outb()
> > directly.
> 
> Agreed.

Same as above and thanks for spotting my mistake.
diff mbox series

Patch

diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index ca4cdf666f82..4d250e619786 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -1,10 +1,12 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 config SND_MPU401_UART
 	tristate
+	depends on HAS_IOPORT
 	select SND_RAWMIDI
 
 config SND_OPL3_LIB
 	tristate
+	depends on HAS_IOPPORT
 	select SND_TIMER
 	select SND_HWDEP
 	select SND_SEQ_DEVICE if SND_SEQUENCER != n
@@ -128,6 +130,7 @@  config SND_VIRMIDI
 
 config SND_MTPAV
 	tristate "MOTU MidiTimePiece AV multiport MIDI"
+	depends on HAS_IOPORT
 	select SND_RAWMIDI
 	help
 	  To use a MOTU MidiTimePiece AV multiport MIDI adapter
@@ -152,6 +155,7 @@  config SND_MTS64
 
 config SND_SERIAL_U16550
 	tristate "UART16550 serial MIDI driver"
+	depends on HAS_IOPORT
 	select SND_RAWMIDI
 	help
 	  To include support for MIDI serial port interfaces, say Y here
@@ -167,6 +171,7 @@  config SND_SERIAL_U16550
 
 config SND_MPU401
 	tristate "Generic MPU-401 UART driver"
+	depends on HAS_IOPORT
 	select SND_MPU401_UART
 	help
 	  Say Y here to include support for MIDI ports compatible with
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 570b88e0b201..072265429f39 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -31,7 +31,7 @@  if SND_ISA
 
 config SND_ADLIB
 	tristate "AdLib FM card"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	help
 	  Say Y here to include support for AdLib FM cards.
 
@@ -42,7 +42,7 @@  config SND_AD1816A
 	tristate "Analog Devices SoundPort AD1816A"
 	depends on PNP
 	select ISAPNP
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
 	select SND_TIMER
@@ -70,7 +70,7 @@  config SND_ALS100
 	tristate "Diamond Tech. DT-019x and Avance Logic ALSxxx"
 	depends on PNP
 	select ISAPNP
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_SB16_DSP
 	help
@@ -86,7 +86,7 @@  config SND_AZT1605
 	depends on SND
 	select SND_WSS_LIB
 	select SND_MPU401_UART
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	help
 	  Say Y here to include support for Aztech Sound Galaxy cards
 	  based on the AZT1605 chipset.
@@ -99,7 +99,7 @@  config SND_AZT2316
 	depends on SND
 	select SND_WSS_LIB
 	select SND_MPU401_UART
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	help
 	  Say Y here to include support for Aztech Sound Galaxy cards
 	  based on the AZT2316 chipset.
@@ -111,7 +111,7 @@  config SND_AZT2320
 	tristate "Aztech Systems AZT2320"
 	depends on PNP
 	select ISAPNP
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_WSS_LIB
 	help
@@ -124,7 +124,7 @@  config SND_AZT2320
 config SND_CMI8328
 	tristate "C-Media CMI8328"
 	select SND_WSS_LIB
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	help
 	  Say Y here to include support for soundcards based on the
@@ -137,7 +137,7 @@  config SND_CMI8330
 	tristate "C-Media CMI8330"
 	select SND_WSS_LIB
 	select SND_SB16_DSP
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	help
 	  Say Y here to include support for soundcards based on the
@@ -159,7 +159,7 @@  config SND_CS4231
 
 config SND_CS4236
 	tristate "Generic Cirrus Logic CS4232/CS4236+ driver"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_WSS_LIB
 	help
@@ -172,7 +172,7 @@  config SND_CS4236
 
 config SND_ES1688
 	tristate "Generic ESS ES688/ES1688 and ES968 PnP driver"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
 	help
@@ -184,7 +184,7 @@  config SND_ES1688
 
 config SND_ES18XX
 	tristate "Generic ESS ES18xx driver"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
 	help
@@ -197,7 +197,7 @@  config SND_SC6000
 	tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16"
 	depends on HAS_IOPORT_MAP
 	select SND_WSS_LIB
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	help
 	  Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000
@@ -223,7 +223,7 @@  config SND_GUSCLASSIC
 
 config SND_GUSEXTREME
 	tristate "Gravis UltraSound Extreme"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
 	select SND_TIMER
@@ -273,7 +273,7 @@  config SND_INTERWAVE_STB
 
 config SND_JAZZ16
 	tristate "Media Vision Jazz16 card and compatibles"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_SB8_DSP
 	help
@@ -289,7 +289,7 @@  config SND_JAZZ16
 
 config SND_OPL3SA2
 	tristate "Yamaha OPL3-SA2/SA3"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_WSS_LIB
 	help
@@ -301,7 +301,7 @@  config SND_OPL3SA2
 
 config SND_OPTI92X_AD1848
 	tristate "OPTi 82C92x - AD1848"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_OPL4_LIB
 	select SND_MPU401_UART
 	select SND_WSS_LIB
@@ -314,7 +314,7 @@  config SND_OPTI92X_AD1848
 
 config SND_OPTI92X_CS4231
 	tristate "OPTi 82C92x - CS4231"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_OPL4_LIB
 	select SND_MPU401_UART
 	select SND_WSS_LIB
@@ -327,7 +327,7 @@  config SND_OPTI92X_CS4231
 
 config SND_OPTI93X
 	tristate "OPTi 82C93x"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_WSS_LIB
 	help
@@ -352,7 +352,7 @@  config SND_MIRO
 
 config SND_SB8
 	tristate "Sound Blaster 1.0/2.0/Pro (8-bit)"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_RAWMIDI
 	select SND_SB8_DSP
 	help
@@ -364,7 +364,7 @@  config SND_SB8
 
 config SND_SB16
 	tristate "Sound Blaster 16 (PnP)"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_SB16_DSP
 	help
@@ -376,7 +376,7 @@  config SND_SB16
 
 config SND_SBAWE
 	tristate "Sound Blaster AWE (32,64) (PnP)"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_SB16_DSP
 	select SND_SEQ_DEVICE if SND_SEQUENCER != n
@@ -427,7 +427,7 @@  config SND_SSCAPE
 config SND_WAVEFRONT
 	tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
 	select FW_LOADER
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_WSS_LIB
 	help
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index a55836225401..c9fd973a7893 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -25,8 +25,8 @@  config SND_ALS300
 	tristate "Avance Logic ALS300/ALS300+"
 	select SND_PCM
 	select SND_AC97_CODEC
-	select SND_OPL3_LIB
-	depends on ZONE_DMA
+	depends on SND_OPL3_LIB
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
 
@@ -36,7 +36,7 @@  config SND_ALS300
 config SND_ALS4000
 	tristate "Avance Logic ALS4000"
 	depends on ISA_DMA_API
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
 	select SND_SB_COMMON
@@ -51,7 +51,7 @@  config SND_ALI5451
 	tristate "ALi M5451 PCI Audio Controller"
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
-	depends on ZONE_DMA
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say Y here to include support for the integrated AC97 sound
 	  device on motherboards using the ALi M5451 Audio Controller
@@ -96,6 +96,7 @@  config SND_ATIIXP_MODEM
 
 config SND_AU8810
 	tristate "Aureal Advantage"
+	depends on HAS_IOPORT
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -110,6 +111,7 @@  config SND_AU8810
 
 config SND_AU8820
 	tristate "Aureal Vortex"
+	depends on HAS_IOPORT
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -123,6 +125,7 @@  config SND_AU8820
 
 config SND_AU8830
 	tristate "Aureal Vortex 2"
+	depends on HAS_IOPORT
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -151,13 +154,13 @@  config SND_AW2
 
 config SND_AZT3328
 	tristate "Aztech AZF3328 / PCI168"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	select SND_TIMER
-	depends on ZONE_DMA
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say Y here to include support for Aztech AZF3328 (PCI168)
 	  soundcards.
@@ -193,6 +196,7 @@  config SND_BT87X_OVERCLOCK
 
 config SND_CA0106
 	tristate "SB Audigy LS / Live 24bit"
+	depends on HAS_IOPORT
 	select SND_AC97_CODEC
 	select SND_RAWMIDI
 	select SND_VMASTER
@@ -205,7 +209,8 @@  config SND_CA0106
 
 config SND_CMIPCI
 	tristate "C-Media 8338, 8738, 8768, 8770"
-	select SND_OPL3_LIB
+	depends on HAS_IOPORT
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
 	help
@@ -221,6 +226,7 @@  config SND_OXYGEN_LIB
 
 config SND_OXYGEN
 	tristate "C-Media 8786, 8787, 8788 (Oxygen)"
+	depends on HAS_IOPORT
 	select SND_OXYGEN_LIB
 	select SND_PCM
 	select SND_MPU401_UART
@@ -246,7 +252,8 @@  config SND_OXYGEN
 
 config SND_CS4281
 	tristate "Cirrus Logic (Sound Fusion) CS4281"
-	select SND_OPL3_LIB
+	depends on HAS_IOPORT
+	depends on SND_OPL3_LIB
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	help
@@ -257,6 +264,7 @@  config SND_CS4281
 
 config SND_CS46XX
 	tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
+	depends on HAS_IOPORT
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	select FW_LOADER
@@ -290,6 +298,7 @@  config SND_CS5530
 config SND_CS5535AUDIO
 	tristate "CS5535/CS5536 Audio"
 	depends on X86_32 || MIPS || COMPILE_TEST
+	depends on HAS_IOPORT
 	select SND_PCM
 	select SND_AC97_CODEC
 	help
@@ -307,6 +316,7 @@  config SND_CS5535AUDIO
 
 config SND_CTXFI
 	tristate "Creative Sound Blaster X-Fi"
+	depends on HAS_IOPORT
 	select SND_PCM
 	help
 	  If you want to use soundcards based on Creative Sound Blastr X-Fi
@@ -468,7 +478,7 @@  config SND_EMU10K1
 	select SND_AC97_CODEC
 	select SND_TIMER
 	select SND_SEQ_DEVICE if SND_SEQUENCER != n
-	depends on ZONE_DMA
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say Y to include support for Sound Blaster PCI 512, Live!,
 	  Audigy and E-mu APS (partially supported) soundcards.
@@ -491,7 +501,7 @@  config SND_EMU10K1X
 	tristate "Emu10k1X (Dell OEM Version)"
 	select SND_AC97_CODEC
 	select SND_RAWMIDI
-	depends on ZONE_DMA
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say Y here to include support for the Dell OEM version of the
 	  Sound Blaster Live!.
@@ -501,6 +511,7 @@  config SND_EMU10K1X
 
 config SND_ENS1370
 	tristate "(Creative) Ensoniq AudioPCI 1370"
+	depends on HAS_IOPORT
 	select SND_RAWMIDI
 	select SND_PCM
 	help
@@ -511,6 +522,7 @@  config SND_ENS1370
 
 config SND_ENS1371
 	tristate "(Creative) Ensoniq AudioPCI 1371/1373"
+	depends on HAS_IOPORT
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	help
@@ -522,10 +534,10 @@  config SND_ENS1371
 
 config SND_ES1938
 	tristate "ESS ES1938/1946/1969 (Solo-1)"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
-	depends on ZONE_DMA
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say Y here to include support for soundcards based on ESS Solo-1
 	  (ES1938, ES1946, ES1969) chips.
@@ -537,7 +549,7 @@  config SND_ES1968
 	tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
-	depends on ZONE_DMA
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say Y here to include support for soundcards based on ESS Maestro
 	  1/2/2E chips.
@@ -569,7 +581,8 @@  config SND_ES1968_RADIO
 
 config SND_FM801
 	tristate "ForteMedia FM801"
-	select SND_OPL3_LIB
+	depends on HAS_IOPORT
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -624,7 +637,7 @@  config SND_ICE1712
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	select BITREVERSE
-	depends on ZONE_DMA
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say Y here to include support for soundcards based on the
 	  ICE1712 (Envy24) chip.
@@ -640,6 +653,7 @@  config SND_ICE1712
 
 config SND_ICE1724
 	tristate "ICE/VT1724/1720 (Envy24HT/PT)"
+	depends on HAS_IOPORT
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	select SND_VMASTER
@@ -712,7 +726,7 @@  config SND_LX6464ES
 config SND_MAESTRO3
 	tristate "ESS Allegro/Maestro3"
 	select SND_AC97_CODEC
-	depends on ZONE_DMA
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say Y here to include support for soundcards based on ESS Maestro 3
 	  (Allegro) chips.
@@ -753,6 +767,7 @@  config SND_NM256
 
 config SND_PCXHR
 	tristate "Digigram PCXHR"
+	depends on HAS_IOPORT
 	select FW_LOADER
 	select SND_PCM
 	select SND_HWDEP
@@ -764,8 +779,9 @@  config SND_PCXHR
 
 config SND_RIPTIDE
 	tristate "Conexant Riptide"
+	depends on HAS_IOPORT
 	select FW_LOADER
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -808,6 +824,7 @@  config SND_RME9652
 config SND_SE6X
 	tristate "Studio Evolution SE6X"
 	depends on SND_OXYGEN=n && SND_VIRTUOSO=n  # PCI ID conflict
+	depends on HAS_IOPORT
 	select SND_OXYGEN_LIB
 	select SND_PCM
 	select SND_MPU401_UART
@@ -827,10 +844,10 @@  config SND_SIS7019
 
 config SND_SONICVIBES
 	tristate "S3 SonicVibes"
-	select SND_OPL3_LIB
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
-	depends on ZONE_DMA
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say Y here to include support for soundcards based on the S3
 	  SonicVibes chip.
@@ -842,7 +859,7 @@  config SND_TRIDENT
 	tristate "Trident 4D-Wave DX/NX; SiS 7018"
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
-	depends on ZONE_DMA
+	depends on ZONE_DMA && HAS_IOPORT
 	help
 	  Say Y here to include support for soundcards based on Trident
 	  4D-Wave DX/NX or SiS 7018 chips.
@@ -852,6 +869,7 @@  config SND_TRIDENT
 
 config SND_VIA82XX
 	tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
+	depends on HAS_IOPORT
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -863,6 +881,7 @@  config SND_VIA82XX
 
 config SND_VIA82XX_MODEM
 	tristate "VIA 82C686A/B, 8233 based Modems"
+	depends on HAS_IOPORT
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for the integrated MC97 modem on
@@ -873,6 +892,7 @@  config SND_VIA82XX_MODEM
 
 config SND_VIRTUOSO
 	tristate "Asus Virtuoso 66/100/200 (Xonar)"
+	depends on HAS_IOPORT
 	select SND_OXYGEN_LIB
 	select SND_PCM
 	select SND_MPU401_UART
@@ -889,6 +909,7 @@  config SND_VIRTUOSO
 
 config SND_VX222
 	tristate "Digigram VX222"
+	depends on HAS_IOPORT
 	select SND_VX_LIB
 	help
 	  Say Y here to include support for Digigram VX222 soundcards.
@@ -898,7 +919,8 @@  config SND_VX222
 
 config SND_YMFPCI
 	tristate "Yamaha YMF724/740/744/754"
-	select SND_OPL3_LIB
+	depends on HAS_IOPORT
+	depends on SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	select SND_TIMER