diff mbox series

[v4,06/14] riscv: dts: canaan: fix the k210's memory node

Message ID 20220701192300.2293643-7-conor@kernel.org (mailing list archive)
State New, archived
Headers show
Series Canaan devicetree fixes | expand

Commit Message

Conor Dooley July 1, 2022, 7:22 p.m. UTC 
From: Conor Dooley <conor.dooley@microchip.com>

The k210 U-Boot port has been using the clocks defined in the
devicetree to bring up the board's SRAM, but this violates the
dt-schema. As such, move the clocks to a dedicated node with
the same compatible string. The regs property does not fit in
either node, so is replaced by comments.

Tested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 arch/riscv/boot/dts/canaan/k210.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
index 44d338514761..cd4eae82d8b2 100644
--- a/arch/riscv/boot/dts/canaan/k210.dtsi
+++ b/arch/riscv/boot/dts/canaan/k210.dtsi
@@ -69,11 +69,13 @@  cpu1_intc: interrupt-controller {
 
 	sram: memory@80000000 {
 		device_type = "memory";
+		reg = <0x80000000 0x400000>, /* sram0 4 MiB */
+		      <0x80400000 0x200000>, /* sram1 2 MiB */
+		      <0x80600000 0x200000>; /* aisram 2 MiB */
+	};
+
+	sram_controller: memory-controller {
 		compatible = "canaan,k210-sram";
-		reg = <0x80000000 0x400000>,
-		      <0x80400000 0x200000>,
-		      <0x80600000 0x200000>;
-		reg-names = "sram0", "sram1", "aisram";
 		clocks = <&sysclk K210_CLK_SRAM0>,
 			 <&sysclk K210_CLK_SRAM1>,
 			 <&sysclk K210_CLK_AI>;