@@ -2494,7 +2494,7 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
/* Select JD-source */
snd_soc_component_update_bits(component, RT5640_JD_CTRL,
- RT5640_JD_MASK, rt5640->jd_src);
+ RT5640_JD_MASK, rt5640->jd_src << RT5640_JD_SFT);
/* Selecting GPIO01 as an interrupt */
snd_soc_component_update_bits(component, RT5640_GPIO_CTRL1,
@@ -2504,12 +2504,8 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
snd_soc_component_update_bits(component, RT5640_GPIO_CTRL3,
RT5640_GP1_PF_MASK, RT5640_GP1_PF_OUT);
- /* Enabling jd2 in general control 1 */
snd_soc_component_write(component, RT5640_DUMMY1, 0x3f41);
- /* Enabling jd2 in general control 2 */
- snd_soc_component_write(component, RT5640_DUMMY2, 0x4001);
-
rt5640_set_ovcd_params(component);
/*
@@ -2518,12 +2514,25 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component,
* pin 0/1 instead of it being stuck to 1. So we invert the JD polarity
* on systems where the hardware does not already do this.
*/
- if (rt5640->jd_inverted)
- snd_soc_component_write(component, RT5640_IRQ_CTRL1,
- RT5640_IRQ_JD_NOR);
- else
- snd_soc_component_write(component, RT5640_IRQ_CTRL1,
- RT5640_IRQ_JD_NOR | RT5640_JD_P_INV);
+ if (rt5640->jd_inverted) {
+ if (rt5640->jd_src == RT5640_JD_SRC_JD1_IN4P)
+ snd_soc_component_write(component, RT5640_IRQ_CTRL1,
+ RT5640_IRQ_JD_NOR);
+ else if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+ snd_soc_component_update_bits(component, RT5640_DUMMY2,
+ RT5640_IRQ_JD2_MASK | RT5640_JD2_MASK,
+ RT5640_IRQ_JD2_NOR | RT5640_JD2_EN);
+ } else {
+ if (rt5640->jd_src == RT5640_JD_SRC_JD1_IN4P)
+ snd_soc_component_write(component, RT5640_IRQ_CTRL1,
+ RT5640_IRQ_JD_NOR | RT5640_JD_P_INV);
+ else if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+ snd_soc_component_update_bits(component, RT5640_DUMMY2,
+ RT5640_IRQ_JD2_MASK | RT5640_JD2_P_MASK |
+ RT5640_JD2_MASK,
+ RT5640_IRQ_JD2_NOR | RT5640_JD2_P_INV |
+ RT5640_JD2_EN);
+ }
rt5640->jack = jack;
if (rt5640->jack->status & SND_JACK_MICROPHONE) {
@@ -2725,10 +2734,8 @@ static int rt5640_probe(struct snd_soc_component *component)
if (device_property_read_u32(component->dev,
"realtek,jack-detect-source", &val) == 0) {
- if (val <= RT5640_JD_SRC_GPIO4)
- rt5640->jd_src = val << RT5640_JD_SFT;
- else if (val == RT5640_JD_SRC_HDA_HEADER)
- rt5640->jd_src = RT5640_JD_SRC_HDA_HEADER;
+ if (val <= RT5640_JD_SRC_HDA_HEADER)
+ rt5640->jd_src = val;
else
dev_warn(component->dev, "Warning: Invalid jack-detect-source value: %d, leaving jack-detect disabled\n",
val);
@@ -2809,12 +2816,31 @@ static int rt5640_resume(struct snd_soc_component *component)
regcache_sync(rt5640->regmap);
if (rt5640->jack) {
- if (rt5640->jd_src == RT5640_JD_SRC_HDA_HEADER)
+ if (rt5640->jd_src == RT5640_JD_SRC_HDA_HEADER) {
snd_soc_component_update_bits(component,
RT5640_DUMMY2, 0x1100, 0x1100);
- else
- snd_soc_component_write(component, RT5640_DUMMY2,
- 0x4001);
+ } else {
+ if (rt5640->jd_inverted) {
+ if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+ snd_soc_component_update_bits(
+ component, RT5640_DUMMY2,
+ RT5640_IRQ_JD2_MASK |
+ RT5640_JD2_MASK,
+ RT5640_IRQ_JD2_NOR |
+ RT5640_JD2_EN);
+
+ } else {
+ if (rt5640->jd_src == RT5640_JD_SRC_JD2_IN4N)
+ snd_soc_component_update_bits(
+ component, RT5640_DUMMY2,
+ RT5640_IRQ_JD2_MASK |
+ RT5640_JD2_P_MASK |
+ RT5640_JD2_MASK,
+ RT5640_IRQ_JD2_NOR |
+ RT5640_JD2_P_INV |
+ RT5640_JD2_EN);
+ }
+ }
queue_delayed_work(system_long_wq, &rt5640->jack_work, 0);
}
@@ -1984,6 +1984,20 @@
#define RT5640_M_MONO_ADC_R_SFT 12
#define RT5640_MCLK_DET (0x1 << 11)
+/* General Control 1 (0xfb) */
+#define RT5640_IRQ_JD2_MASK (0x1 << 12)
+#define RT5640_IRQ_JD2_SFT 12
+#define RT5640_IRQ_JD2_BP (0x0 << 12)
+#define RT5640_IRQ_JD2_NOR (0x1 << 12)
+#define RT5640_JD2_P_MASK (0x1 << 10)
+#define RT5640_JD2_P_SFT 10
+#define RT5640_JD2_P_NOR (0x0 << 10)
+#define RT5640_JD2_P_INV (0x1 << 10)
+#define RT5640_JD2_MASK (0x1 << 8)
+#define RT5640_JD2_SFT 8
+#define RT5640_JD2_DIS (0x0 << 8)
+#define RT5640_JD2_EN (0x1 << 8)
+
/* Codec Private Register definition */
/* MIC Over current threshold scale factor (0x15) */
The patch fixes the issue of the abnormal JD2 status. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Reported-by: Sameer Pujar <spujar@nvidia.com> --- sound/soc/codecs/rt5640.c | 64 +++++++++++++++++++++++++++------------ sound/soc/codecs/rt5640.h | 14 +++++++++ 2 files changed, 59 insertions(+), 19 deletions(-)