diff mbox series

ASoC: rt1318: Add RT1318 SDCA vendor-specific driver

Message ID 20221108092727.13011-1-shumingf@realtek.com (mailing list archive)
State Accepted
Commit 6ad73a2b42ea6d43fc5bf32033e8f6b21df3109e
Headers show
Series ASoC: rt1318: Add RT1318 SDCA vendor-specific driver | expand

Commit Message

Shuming [θŒƒζ›ΈιŠ˜] Nov. 8, 2022, 9:27 a.m. UTC
From: Shuming Fan <shumingf@realtek.com>

This is the initial amplifier driver for rt1318 SDCA version.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
---
 sound/soc/codecs/Kconfig      |   6 +
 sound/soc/codecs/Makefile     |   2 +
 sound/soc/codecs/rt1318-sdw.c | 884 ++++++++++++++++++++++++++++++++++
 sound/soc/codecs/rt1318-sdw.h | 101 ++++
 4 files changed, 993 insertions(+)
 create mode 100644 sound/soc/codecs/rt1318-sdw.c
 create mode 100644 sound/soc/codecs/rt1318-sdw.h

Comments

Mark Brown Nov. 16, 2022, 1:14 p.m. UTC | #1
On Tue, 8 Nov 2022 17:27:27 +0800, shumingf@realtek.com wrote:
> From: Shuming Fan <shumingf@realtek.com>
> 
> This is the initial amplifier driver for rt1318 SDCA version.
> 
> 

Applied to

   broonie/sound.git for-next

Thanks!

[1/1] ASoC: rt1318: Add RT1318 SDCA vendor-specific driver
      commit: 6ad73a2b42ea6d43fc5bf32033e8f6b21df3109e

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 7a13e750751a..6b3726a1ff45 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -199,6 +199,7 @@  config SND_SOC_ALL_CODECS
 	imply SND_SOC_RT715_SDCA_SDW
 	imply SND_SOC_RT1308_SDW
 	imply SND_SOC_RT1316_SDW
+	imply SND_SOC_RT1318_SDW
 	imply SND_SOC_RT9120
 	imply SND_SOC_SDW_MOCKUP
 	imply SND_SOC_SGTL5000
@@ -1311,6 +1312,11 @@  config SND_SOC_RT1316_SDW
 	depends on SOUNDWIRE
 	select REGMAP_SOUNDWIRE
 
+config SND_SOC_RT1318_SDW
+	tristate "Realtek RT1318 Codec - SDW"
+	depends on SOUNDWIRE
+	select REGMAP_SOUNDWIRE
+
 config SND_SOC_RT5514
 	tristate
 	depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 9170ee1447dd..71d3ce5867e4 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -196,6 +196,7 @@  snd-soc-rt1305-objs := rt1305.o
 snd-soc-rt1308-objs := rt1308.o
 snd-soc-rt1308-sdw-objs := rt1308-sdw.o
 snd-soc-rt1316-sdw-objs := rt1316-sdw.o
+snd-soc-rt1318-sdw-objs := rt1318-sdw.o
 snd-soc-rt274-objs := rt274.o
 snd-soc-rt286-objs := rt286.o
 snd-soc-rt298-objs := rt298.o
@@ -551,6 +552,7 @@  obj-$(CONFIG_SND_SOC_RT1305)	+= snd-soc-rt1305.o
 obj-$(CONFIG_SND_SOC_RT1308)	+= snd-soc-rt1308.o
 obj-$(CONFIG_SND_SOC_RT1308_SDW)	+= snd-soc-rt1308-sdw.o
 obj-$(CONFIG_SND_SOC_RT1316_SDW)	+= snd-soc-rt1316-sdw.o
+obj-$(CONFIG_SND_SOC_RT1318_SDW)	+= snd-soc-rt1318-sdw.o
 obj-$(CONFIG_SND_SOC_RT274)	+= snd-soc-rt274.o
 obj-$(CONFIG_SND_SOC_RT286)	+= snd-soc-rt286.o
 obj-$(CONFIG_SND_SOC_RT298)	+= snd-soc-rt298.o
diff --git a/sound/soc/codecs/rt1318-sdw.c b/sound/soc/codecs/rt1318-sdw.c
new file mode 100644
index 000000000000..f85f5ab2c6d0
--- /dev/null
+++ b/sound/soc/codecs/rt1318-sdw.c
@@ -0,0 +1,884 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// rt1318-sdw.c -- rt1318 SDCA ALSA SoC amplifier audio driver
+//
+// Copyright(c) 2022 Realtek Semiconductor Corp.
+//
+//
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/pm_runtime.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/dmi.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include "rt1318-sdw.h"
+
+static const struct reg_sequence rt1318_blind_write[] = {
+	{ 0xc001, 0x43 },
+	{ 0xc003, 0xa2 },
+	{ 0xc004, 0x44 },
+	{ 0xc005, 0x44 },
+	{ 0xc006, 0x33 },
+	{ 0xc007, 0x64 },
+	{ 0xc320, 0x20 },
+	{ 0xf203, 0x18 },
+	{ 0xf211, 0x00 },
+	{ 0xf212, 0x26 },
+	{ 0xf20d, 0x17 },
+	{ 0xf214, 0x06 },
+	{ 0xf20e, 0x00 },
+	{ 0xf223, 0x7f },
+	{ 0xf224, 0xdb },
+	{ 0xf225, 0xee },
+	{ 0xf226, 0x3f },
+	{ 0xf227, 0x0f },
+	{ 0xf21a, 0x78 },
+	{ 0xf242, 0x3c },
+	{ 0xc321, 0x0b },
+	{ 0xc200, 0xd8 },
+	{ 0xc201, 0x27 },
+	{ 0xc202, 0x0f },
+	{ 0xf800, 0x20 },
+	{ 0xdf00, 0x10 },
+	{ 0xdf5f, 0x01 },
+	{ 0xdf60, 0xa7 },
+	{ 0xc400, 0x0e },
+	{ 0xc401, 0x43 },
+	{ 0xc402, 0xe0 },
+	{ 0xc403, 0x00 },
+	{ 0xc404, 0x4c },
+	{ 0xc407, 0x02 },
+	{ 0xc408, 0x3f },
+	{ 0xc300, 0x01 },
+	{ 0xc206, 0x78 },
+	{ 0xc203, 0x84 },
+	{ 0xc120, 0xc0 },
+	{ 0xc121, 0x03 },
+	{ 0xe000, 0x88 },
+	{ 0xc321, 0x09 },
+	{ 0xc322, 0x01 },
+	{ 0xe706, 0x0f },
+	{ 0xe707, 0x30 },
+	{ 0xe806, 0x0f },
+	{ 0xe807, 0x30 },
+	{ 0xed00, 0xb0 },
+	{ 0xce04, 0x02 },
+	{ 0xce05, 0x63 },
+	{ 0xce06, 0x68 },
+	{ 0xce07, 0x07 },
+	{ 0xcf04, 0x02 },
+	{ 0xcf05, 0x63 },
+	{ 0xcf06, 0x68 },
+	{ 0xcf07, 0x07 },
+	{ 0xce60, 0xe3 },
+	{ 0xc130, 0x51 },
+	{ 0xf102, 0x00 },
+	{ 0xf103, 0x00 },
+	{ 0xf104, 0xf5 },
+	{ 0xf105, 0x06 },
+	{ 0xf109, 0x9b },
+	{ 0xf10a, 0x0b },
+	{ 0xf10b, 0x4c },
+	{ 0xf10b, 0x5c },
+	{ 0xf102, 0x00 },
+	{ 0xf103, 0x00 },
+	{ 0xf104, 0xf5 },
+	{ 0xf105, 0x0b },
+	{ 0xf109, 0x03 },
+	{ 0xf10a, 0x0b },
+	{ 0xf10b, 0x4c },
+	{ 0xf10b, 0x5c },
+	{ 0xf102, 0x00 },
+	{ 0xf103, 0x00 },
+	{ 0xf104, 0xf5 },
+	{ 0xf105, 0x0c },
+	{ 0xf109, 0x7f },
+	{ 0xf10a, 0x0b },
+	{ 0xf10b, 0x4c },
+	{ 0xf10b, 0x5c },
+
+	{ 0xe604, 0x00 },
+	{ 0xdb00, 0x0c },
+	{ 0xdd00, 0x0c },
+	{ 0xdc19, 0x00 },
+	{ 0xdc1a, 0xff },
+	{ 0xdc1b, 0xff },
+	{ 0xdc1c, 0xff },
+	{ 0xdc1d, 0x00 },
+	{ 0xdc1e, 0x00 },
+	{ 0xdc1f, 0x00 },
+	{ 0xdc20, 0xff },
+	{ 0xde19, 0x00 },
+	{ 0xde1a, 0xff },
+	{ 0xde1b, 0xff },
+	{ 0xde1c, 0xff },
+	{ 0xde1d, 0x00 },
+	{ 0xde1e, 0x00 },
+	{ 0xde1f, 0x00 },
+	{ 0xde20, 0xff },
+	{ 0xdb32, 0x00 },
+	{ 0xdd32, 0x00 },
+	{ 0xdb33, 0x0a },
+	{ 0xdd33, 0x0a },
+	{ 0xdb34, 0x1a },
+	{ 0xdd34, 0x1a },
+	{ 0xdb17, 0xef },
+	{ 0xdd17, 0xef },
+	{ 0xdba7, 0x00 },
+	{ 0xdba8, 0x64 },
+	{ 0xdda7, 0x00 },
+	{ 0xdda8, 0x64 },
+	{ 0xdb19, 0x40 },
+	{ 0xdd19, 0x40 },
+	{ 0xdb00, 0x4c },
+	{ 0xdb01, 0x79 },
+	{ 0xdd01, 0x79 },
+	{ 0xdb04, 0x05 },
+	{ 0xdb05, 0x03 },
+	{ 0xdd04, 0x05 },
+	{ 0xdd05, 0x03 },
+	{ 0xdbbb, 0x09 },
+	{ 0xdbbc, 0x30 },
+	{ 0xdbbd, 0xf0 },
+	{ 0xdbbe, 0xf1 },
+	{ 0xddbb, 0x09 },
+	{ 0xddbc, 0x30 },
+	{ 0xddbd, 0xf0 },
+	{ 0xddbe, 0xf1 },
+	{ 0xdb01, 0x79 },
+	{ 0xdd01, 0x79 },
+	{ 0xdc52, 0xef },
+	{ 0xde52, 0xef },
+	{ 0x2f55, 0x22 },
+};
+
+static const struct reg_default rt1318_reg_defaults[] = {
+	{ 0x3000, 0x00 },
+	{ 0x3004, 0x01 },
+	{ 0x3005, 0x23 },
+	{ 0x3202, 0x00 },
+	{ 0x3203, 0x01 },
+	{ 0x3206, 0x00 },
+	{ 0xc000, 0x00 },
+	{ 0xc001, 0x43 },
+	{ 0xc003, 0x22 },
+	{ 0xc004, 0x44 },
+	{ 0xc005, 0x44 },
+	{ 0xc006, 0x33 },
+	{ 0xc007, 0x64 },
+	{ 0xc008, 0x05 },
+	{ 0xc00a, 0xfc },
+	{ 0xc00b, 0x0f },
+	{ 0xc00c, 0x0e },
+	{ 0xc00d, 0xef },
+	{ 0xc00e, 0xe5 },
+	{ 0xc00f, 0xff },
+	{ 0xc120, 0xc0 },
+	{ 0xc121, 0x00 },
+	{ 0xc122, 0x00 },
+	{ 0xc123, 0x14 },
+	{ 0xc125, 0x00 },
+	{ 0xc200, 0x00 },
+	{ 0xc201, 0x00 },
+	{ 0xc202, 0x00 },
+	{ 0xc203, 0x04 },
+	{ 0xc204, 0x00 },
+	{ 0xc205, 0x00 },
+	{ 0xc206, 0x68 },
+	{ 0xc207, 0x70 },
+	{ 0xc208, 0x00 },
+	{ 0xc20a, 0x00 },
+	{ 0xc20b, 0x01 },
+	{ 0xc20c, 0x7f },
+	{ 0xc20d, 0x01 },
+	{ 0xc20e, 0x7f },
+	{ 0xc300, 0x00 },
+	{ 0xc301, 0x00 },
+	{ 0xc303, 0x80 },
+	{ 0xc320, 0x00 },
+	{ 0xc321, 0x09 },
+	{ 0xc322, 0x02 },
+	{ 0xc410, 0x04 },
+	{ 0xc430, 0x00 },
+	{ 0xc431, 0x00 },
+	{ 0xca00, 0x10 },
+	{ 0xca01, 0x00 },
+	{ 0xca02, 0x0b },
+	{ 0xca10, 0x10 },
+	{ 0xca11, 0x00 },
+	{ 0xca12, 0x0b },
+	{ 0xdd93, 0x00 },
+	{ 0xdd94, 0x64 },
+	{ 0xe300, 0xa0 },
+	{ 0xed00, 0x80 },
+	{ 0xed01, 0x0f },
+	{ 0xed02, 0xff },
+	{ 0xed03, 0x00 },
+	{ 0xed04, 0x00 },
+	{ 0xed05, 0x0f },
+	{ 0xed06, 0xff },
+	{ 0xf010, 0x10 },
+	{ 0xf011, 0xec },
+	{ 0xf012, 0x68 },
+	{ 0xf013, 0x21 },
+	{ 0xf800, 0x00 },
+	{ 0xf801, 0x12 },
+	{ 0xf802, 0xe0 },
+	{ 0xf803, 0x2f },
+	{ 0xf804, 0x00 },
+	{ 0xf805, 0x00 },
+	{ 0xf806, 0x07 },
+	{ 0xf807, 0xff },
+	{ SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_UDMPU21, RT1318_SDCA_CTL_UDMPU_CLUSTER, 0), 0x00 },
+	{ SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_L), 0x01 },
+	{ SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_R), 0x01 },
+	{ SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_PDE23, RT1318_SDCA_CTL_REQ_POWER_STATE, 0), 0x03 },
+	{ SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_CS21, RT1318_SDCA_CTL_SAMPLE_FREQ_INDEX, 0), 0x09 },
+};
+
+static bool rt1318_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x2f55:
+	case 0x3000:
+	case 0x3004 ... 0x3005:
+	case 0x3202 ... 0x3203:
+	case 0x3206:
+	case 0xc000 ... 0xc00f:
+	case 0xc120 ... 0xc125:
+	case 0xc200 ... 0xc20e:
+	case 0xc300 ... 0xc303:
+	case 0xc320 ... 0xc322:
+	case 0xc410:
+	case 0xc430 ... 0xc431:
+	case 0xca00 ... 0xca02:
+	case 0xca10 ... 0xca12:
+	case 0xcb00 ... 0xcb0b:
+	case 0xcc00 ... 0xcce5:
+	case 0xcd00 ... 0xcde5:
+	case 0xce00 ... 0xce6a:
+	case 0xcf00 ... 0xcf53:
+	case 0xd000 ... 0xd0cc:
+	case 0xd100 ... 0xd1b9:
+	case 0xdb00 ... 0xdc53:
+	case 0xdd00 ... 0xde53:
+	case 0xdf00 ... 0xdf6b:
+	case 0xe300:
+	case 0xeb00 ... 0xebcc:
+	case 0xec00 ... 0xecb9:
+	case 0xed00 ... 0xed06:
+	case 0xf010 ... 0xf014:
+	case 0xf800 ... 0xf807:
+	case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_UDMPU21, RT1318_SDCA_CTL_UDMPU_CLUSTER, 0):
+	case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_L):
+	case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_R):
+	case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_PDE23, RT1318_SDCA_CTL_REQ_POWER_STATE, 0):
+	case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_CS21, RT1318_SDCA_CTL_SAMPLE_FREQ_INDEX, 0):
+	case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_SAPU, RT1318_SDCA_CTL_SAPU_PROTECTION_MODE, 0):
+	case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_SAPU, RT1318_SDCA_CTL_SAPU_PROTECTION_STATUS, 0):
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool rt1318_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case 0x2f55:
+	case 0x3000 ... 0x3001:
+	case 0xc000:
+	case 0xc301:
+	case 0xc410:
+	case 0xc430 ... 0xc431:
+	case 0xdb06:
+	case 0xdb12:
+	case 0xdb1d ... 0xdb1f:
+	case 0xdb35:
+	case 0xdb37:
+	case 0xdb8a ... 0xdb92:
+	case 0xdbc5 ... 0xdbc8:
+	case 0xdc2b ... 0xdc49:
+	case 0xdd0b:
+	case 0xdd12:
+	case 0xdd1d ... 0xdd1f:
+	case 0xdd35:
+	case 0xdd8a ... 0xdd92:
+	case 0xddc5 ... 0xddc8:
+	case 0xde2b ... 0xde44:
+	case 0xdf4a ... 0xdf55:
+	case 0xe224 ... 0xe23b:
+	case 0xea01:
+	case 0xebc5:
+	case 0xebc8:
+	case 0xebcb ... 0xebcc:
+	case 0xed03 ... 0xed06:
+	case 0xf010 ... 0xf014:
+	case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_SAPU, RT1318_SDCA_CTL_SAPU_PROTECTION_MODE, 0):
+	case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_SAPU, RT1318_SDCA_CTL_SAPU_PROTECTION_STATUS, 0):
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config rt1318_sdw_regmap = {
+	.reg_bits = 32,
+	.val_bits = 8,
+	.readable_reg = rt1318_readable_register,
+	.volatile_reg = rt1318_volatile_register,
+	.max_register = 0x41081488,
+	.reg_defaults = rt1318_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(rt1318_reg_defaults),
+	.cache_type = REGCACHE_RBTREE,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+static int rt1318_read_prop(struct sdw_slave *slave)
+{
+	struct sdw_slave_prop *prop = &slave->prop;
+	int nval;
+	int i, j;
+	u32 bit;
+	unsigned long addr;
+	struct sdw_dpn_prop *dpn;
+
+	prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+	prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
+	prop->is_sdca = true;
+
+	prop->paging_support = true;
+
+	/* first we need to allocate memory for set bits in port lists */
+	prop->source_ports = BIT(2);
+	prop->sink_ports = BIT(1);
+
+	nval = hweight32(prop->source_ports);
+	prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
+		sizeof(*prop->src_dpn_prop), GFP_KERNEL);
+	if (!prop->src_dpn_prop)
+		return -ENOMEM;
+
+	i = 0;
+	dpn = prop->src_dpn_prop;
+	addr = prop->source_ports;
+	for_each_set_bit(bit, &addr, 32) {
+		dpn[i].num = bit;
+		dpn[i].type = SDW_DPN_FULL;
+		dpn[i].simple_ch_prep_sm = true;
+		dpn[i].ch_prep_timeout = 10;
+		i++;
+	}
+
+	/* do this again for sink now */
+	nval = hweight32(prop->sink_ports);
+	prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
+		sizeof(*prop->sink_dpn_prop), GFP_KERNEL);
+	if (!prop->sink_dpn_prop)
+		return -ENOMEM;
+
+	j = 0;
+	dpn = prop->sink_dpn_prop;
+	addr = prop->sink_ports;
+	for_each_set_bit(bit, &addr, 32) {
+		dpn[j].num = bit;
+		dpn[j].type = SDW_DPN_FULL;
+		dpn[j].simple_ch_prep_sm = true;
+		dpn[j].ch_prep_timeout = 10;
+		j++;
+	}
+
+	/* set the timeout values */
+	prop->clk_stop_timeout = 20;
+
+	return 0;
+}
+
+static int rt1318_io_init(struct device *dev, struct sdw_slave *slave)
+{
+	struct rt1318_sdw_priv *rt1318 = dev_get_drvdata(dev);
+
+	if (rt1318->hw_init)
+		return 0;
+
+	if (rt1318->first_hw_init) {
+		regcache_cache_only(rt1318->regmap, false);
+		regcache_cache_bypass(rt1318->regmap, true);
+	} else {
+		/*
+		 * PM runtime is only enabled when a Slave reports as Attached
+		 */
+
+		/* set autosuspend parameters */
+		pm_runtime_set_autosuspend_delay(&slave->dev, 3000);
+		pm_runtime_use_autosuspend(&slave->dev);
+
+		/* update count of parent 'active' children */
+		pm_runtime_set_active(&slave->dev);
+
+		/* make sure the device does not suspend immediately */
+		pm_runtime_mark_last_busy(&slave->dev);
+
+		pm_runtime_enable(&slave->dev);
+	}
+
+	pm_runtime_get_noresume(&slave->dev);
+
+	/* blind write */
+	regmap_multi_reg_write(rt1318->regmap, rt1318_blind_write,
+		ARRAY_SIZE(rt1318_blind_write));
+
+	if (rt1318->first_hw_init) {
+		regcache_cache_bypass(rt1318->regmap, false);
+		regcache_mark_dirty(rt1318->regmap);
+	}
+
+	/* Mark Slave initialization complete */
+	rt1318->first_hw_init = true;
+	rt1318->hw_init = true;
+
+	pm_runtime_mark_last_busy(&slave->dev);
+	pm_runtime_put_autosuspend(&slave->dev);
+
+	dev_dbg(&slave->dev, "%s hw_init complete\n", __func__);
+	return 0;
+}
+
+static int rt1318_update_status(struct sdw_slave *slave,
+					enum sdw_slave_status status)
+{
+	struct  rt1318_sdw_priv *rt1318 = dev_get_drvdata(&slave->dev);
+
+	/* Update the status */
+	rt1318->status = status;
+
+	if (status == SDW_SLAVE_UNATTACHED)
+		rt1318->hw_init = false;
+
+	/*
+	 * Perform initialization only if slave status is present and
+	 * hw_init flag is false
+	 */
+	if (rt1318->hw_init || rt1318->status != SDW_SLAVE_ATTACHED)
+		return 0;
+
+	/* perform I/O transfers required for Slave initialization */
+	return rt1318_io_init(&slave->dev, slave);
+}
+
+static int rt1318_classd_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+	struct rt1318_sdw_priv *rt1318 = snd_soc_component_get_drvdata(component);
+	unsigned char ps0 = 0x0, ps3 = 0x3;
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		regmap_write(rt1318->regmap,
+			SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_PDE23,
+				RT1318_SDCA_CTL_REQ_POWER_STATE, 0),
+				ps0);
+		break;
+	case SND_SOC_DAPM_PRE_PMD:
+		regmap_write(rt1318->regmap,
+			SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_PDE23,
+				RT1318_SDCA_CTL_REQ_POWER_STATE, 0),
+				ps3);
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static const char * const rt1318_rx_data_ch_select[] = {
+	"L,R",
+	"L,L",
+	"L,R",
+	"L,L+R",
+	"R,L",
+	"R,R",
+	"R,L+R",
+	"L+R,L",
+	"L+R,R",
+	"L+R,L+R",
+};
+
+static SOC_ENUM_SINGLE_DECL(rt1318_rx_data_ch_enum,
+	SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_UDMPU21, RT1318_SDCA_CTL_UDMPU_CLUSTER, 0), 0,
+	rt1318_rx_data_ch_select);
+
+static const struct snd_kcontrol_new rt1318_snd_controls[] = {
+
+	/* UDMPU Cluster Selection */
+	SOC_ENUM("RX Channel Select", rt1318_rx_data_ch_enum),
+};
+
+static const struct snd_kcontrol_new rt1318_sto_dac =
+	SOC_DAPM_DOUBLE_R("Switch",
+		SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_L),
+		SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_R),
+		0, 1, 1);
+
+static const struct snd_soc_dapm_widget rt1318_dapm_widgets[] = {
+	/* Audio Interface */
+	SND_SOC_DAPM_AIF_IN("DP1RX", "DP1 Playback", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("DP2TX", "DP2 Capture", 0, SND_SOC_NOPM, 0, 0),
+
+	/* Digital Interface */
+	SND_SOC_DAPM_SWITCH("DAC", SND_SOC_NOPM, 0, 0, &rt1318_sto_dac),
+
+	/* Output */
+	SND_SOC_DAPM_PGA_E("CLASS D", SND_SOC_NOPM, 0, 0, NULL, 0,
+		rt1318_classd_event, SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
+	SND_SOC_DAPM_OUTPUT("SPOL"),
+	SND_SOC_DAPM_OUTPUT("SPOR"),
+	/* Input */
+	SND_SOC_DAPM_PGA("FB Data", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_SIGGEN("FB Gen"),
+};
+
+static const struct snd_soc_dapm_route rt1318_dapm_routes[] = {
+	{ "DAC", "Switch", "DP1RX" },
+	{ "CLASS D", NULL, "DAC" },
+	{ "SPOL", NULL, "CLASS D" },
+	{ "SPOR", NULL, "CLASS D" },
+
+	{ "FB Data", NULL, "FB Gen" },
+	{ "DP2TX", NULL, "FB Data" },
+};
+
+static int rt1318_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream,
+				int direction)
+{
+	struct sdw_stream_data *stream;
+
+	if (!sdw_stream)
+		return 0;
+
+	stream = kzalloc(sizeof(*stream), GFP_KERNEL);
+	if (!stream)
+		return -ENOMEM;
+
+	stream->sdw_stream = sdw_stream;
+
+	/* Use tx_mask or rx_mask to configure stream tag and set dma_data */
+	if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+		dai->playback_dma_data = stream;
+	else
+		dai->capture_dma_data = stream;
+
+	return 0;
+}
+
+static void rt1318_sdw_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct sdw_stream_data *stream;
+
+	stream = snd_soc_dai_get_dma_data(dai, substream);
+	snd_soc_dai_set_dma_data(dai, substream, NULL);
+	kfree(stream);
+}
+
+static int rt1318_sdw_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt1318_sdw_priv *rt1318 =
+		snd_soc_component_get_drvdata(component);
+	struct sdw_stream_config stream_config;
+	struct sdw_port_config port_config;
+	enum sdw_data_direction direction;
+	struct sdw_stream_data *stream;
+	int retval, port, num_channels, ch_mask;
+	unsigned int sampling_rate;
+
+	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
+	stream = snd_soc_dai_get_dma_data(dai, substream);
+
+	if (!stream)
+		return -EINVAL;
+
+	if (!rt1318->sdw_slave)
+		return -EINVAL;
+
+	/* SoundWire specific configuration */
+	/* port 1 for playback */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		direction = SDW_DATA_DIR_RX;
+		port = 1;
+	} else {
+		direction = SDW_DATA_DIR_TX;
+		port = 2;
+	}
+
+	num_channels = params_channels(params);
+	ch_mask = (1 << num_channels) - 1;
+
+	stream_config.frame_rate = params_rate(params);
+	stream_config.ch_count = num_channels;
+	stream_config.bps = snd_pcm_format_width(params_format(params));
+	stream_config.direction = direction;
+
+	port_config.ch_mask = ch_mask;
+	port_config.num = port;
+
+	retval = sdw_stream_add_slave(rt1318->sdw_slave, &stream_config,
+				&port_config, 1, stream->sdw_stream);
+	if (retval) {
+		dev_err(dai->dev, "Unable to configure port\n");
+		return retval;
+	}
+
+	/* sampling rate configuration */
+	switch (params_rate(params)) {
+	case 16000:
+		sampling_rate = RT1318_SDCA_RATE_16000HZ;
+		break;
+	case 32000:
+		sampling_rate = RT1318_SDCA_RATE_32000HZ;
+		break;
+	case 44100:
+		sampling_rate = RT1318_SDCA_RATE_44100HZ;
+		break;
+	case 48000:
+		sampling_rate = RT1318_SDCA_RATE_48000HZ;
+		break;
+	case 96000:
+		sampling_rate = RT1318_SDCA_RATE_96000HZ;
+		break;
+	case 192000:
+		sampling_rate = RT1318_SDCA_RATE_192000HZ;
+		break;
+	default:
+		dev_err(component->dev, "Rate %d is not supported\n",
+			params_rate(params));
+		return -EINVAL;
+	}
+
+	/* set sampling frequency */
+	regmap_write(rt1318->regmap,
+		SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_CS21, RT1318_SDCA_CTL_SAMPLE_FREQ_INDEX, 0),
+		sampling_rate);
+
+	return 0;
+}
+
+static int rt1318_sdw_pcm_hw_free(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt1318_sdw_priv *rt1318 =
+		snd_soc_component_get_drvdata(component);
+	struct sdw_stream_data *stream =
+		snd_soc_dai_get_dma_data(dai, substream);
+
+	if (!rt1318->sdw_slave)
+		return -EINVAL;
+
+	sdw_stream_remove_slave(rt1318->sdw_slave, stream->sdw_stream);
+	return 0;
+}
+
+/*
+ * slave_ops: callbacks for get_clock_stop_mode, clock_stop and
+ * port_prep are not defined for now
+ */
+static struct sdw_slave_ops rt1318_slave_ops = {
+	.read_prop = rt1318_read_prop,
+	.update_status = rt1318_update_status,
+};
+
+static int rt1318_sdw_component_probe(struct snd_soc_component *component)
+{
+	int ret;
+	struct rt1318_sdw_priv *rt1318 = snd_soc_component_get_drvdata(component);
+
+	rt1318->component = component;
+
+	ret = pm_runtime_resume(component->dev);
+	dev_dbg(&rt1318->sdw_slave->dev, "%s pm_runtime_resume, ret=%d", __func__, ret);
+	if (ret < 0 && ret != -EACCES)
+		return ret;
+
+	return 0;
+}
+
+static const struct snd_soc_component_driver soc_component_sdw_rt1318 = {
+	.probe = rt1318_sdw_component_probe,
+	.controls = rt1318_snd_controls,
+	.num_controls = ARRAY_SIZE(rt1318_snd_controls),
+	.dapm_widgets = rt1318_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(rt1318_dapm_widgets),
+	.dapm_routes = rt1318_dapm_routes,
+	.num_dapm_routes = ARRAY_SIZE(rt1318_dapm_routes),
+	.endianness = 1,
+};
+
+static const struct snd_soc_dai_ops rt1318_aif_dai_ops = {
+	.hw_params = rt1318_sdw_hw_params,
+	.hw_free	= rt1318_sdw_pcm_hw_free,
+	.set_stream	= rt1318_set_sdw_stream,
+	.shutdown	= rt1318_sdw_shutdown,
+};
+
+#define RT1318_STEREO_RATES (SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000)
+#define RT1318_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \
+	SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_driver rt1318_sdw_dai[] = {
+	{
+		.name = "rt1318-aif",
+		.playback = {
+			.stream_name = "DP1 Playback",
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = RT1318_STEREO_RATES,
+			.formats = RT1318_FORMATS,
+		},
+		.capture = {
+			.stream_name = "DP2 Capture",
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = RT1318_STEREO_RATES,
+			.formats = RT1318_FORMATS,
+		},
+		.ops = &rt1318_aif_dai_ops,
+	},
+};
+
+static int rt1318_sdw_init(struct device *dev, struct regmap *regmap,
+				struct sdw_slave *slave)
+{
+	struct rt1318_sdw_priv *rt1318;
+	int ret;
+
+	rt1318 = devm_kzalloc(dev, sizeof(*rt1318), GFP_KERNEL);
+	if (!rt1318)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, rt1318);
+	rt1318->sdw_slave = slave;
+	rt1318->regmap = regmap;
+
+	/*
+	 * Mark hw_init to false
+	 * HW init will be performed when device reports present
+	 */
+	rt1318->hw_init = false;
+	rt1318->first_hw_init = false;
+
+	ret =  devm_snd_soc_register_component(dev,
+				&soc_component_sdw_rt1318,
+				rt1318_sdw_dai,
+				ARRAY_SIZE(rt1318_sdw_dai));
+
+	dev_dbg(&slave->dev, "%s\n", __func__);
+
+	return ret;
+}
+
+static int rt1318_sdw_probe(struct sdw_slave *slave,
+				const struct sdw_device_id *id)
+{
+	struct regmap *regmap;
+
+	/* Regmap Initialization */
+	regmap = devm_regmap_init_sdw(slave, &rt1318_sdw_regmap);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return rt1318_sdw_init(&slave->dev, regmap, slave);
+}
+
+static int rt1318_sdw_remove(struct sdw_slave *slave)
+{
+	struct rt1318_sdw_priv *rt1318 = dev_get_drvdata(&slave->dev);
+
+	if (rt1318->first_hw_init)
+		pm_runtime_disable(&slave->dev);
+
+	return 0;
+}
+
+static const struct sdw_device_id rt1318_id[] = {
+	SDW_SLAVE_ENTRY_EXT(0x025d, 0x1318, 0x3, 0x1, 0),
+	{},
+};
+MODULE_DEVICE_TABLE(sdw, rt1318_id);
+
+static int __maybe_unused rt1318_dev_suspend(struct device *dev)
+{
+	struct rt1318_sdw_priv *rt1318 = dev_get_drvdata(dev);
+
+	if (!rt1318->hw_init)
+		return 0;
+
+	regcache_cache_only(rt1318->regmap, true);
+	return 0;
+}
+
+#define RT1318_PROBE_TIMEOUT 5000
+
+static int __maybe_unused rt1318_dev_resume(struct device *dev)
+{
+	struct sdw_slave *slave = dev_to_sdw_dev(dev);
+	struct rt1318_sdw_priv *rt1318 = dev_get_drvdata(dev);
+	unsigned long time;
+
+	if (!rt1318->first_hw_init)
+		return 0;
+
+	if (!slave->unattach_request)
+		goto regmap_sync;
+
+	time = wait_for_completion_timeout(&slave->initialization_complete,
+				msecs_to_jiffies(RT1318_PROBE_TIMEOUT));
+	if (!time) {
+		dev_err(&slave->dev, "Initialization not complete, timed out\n");
+		return -ETIMEDOUT;
+	}
+
+regmap_sync:
+	slave->unattach_request = 0;
+	regcache_cache_only(rt1318->regmap, false);
+	regcache_sync(rt1318->regmap);
+
+	return 0;
+}
+
+static const struct dev_pm_ops rt1318_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(rt1318_dev_suspend, rt1318_dev_resume)
+	SET_RUNTIME_PM_OPS(rt1318_dev_suspend, rt1318_dev_resume, NULL)
+};
+
+static struct sdw_driver rt1318_sdw_driver = {
+	.driver = {
+		.name = "rt1318-sdca",
+		.owner = THIS_MODULE,
+		.pm = &rt1318_pm,
+	},
+	.probe = rt1318_sdw_probe,
+	.remove = rt1318_sdw_remove,
+	.ops = &rt1318_slave_ops,
+	.id_table = rt1318_id,
+};
+module_sdw_driver(rt1318_sdw_driver);
+
+MODULE_DESCRIPTION("ASoC RT1318 driver SDCA SDW");
+MODULE_AUTHOR("Shuming Fan <shumingf@realtek.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/rt1318-sdw.h b/sound/soc/codecs/rt1318-sdw.h
new file mode 100644
index 000000000000..4d7ac9c4bd8d
--- /dev/null
+++ b/sound/soc/codecs/rt1318-sdw.h
@@ -0,0 +1,101 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * rt1318-sdw.h -- RT1318 SDCA ALSA SoC audio driver header
+ *
+ * Copyright(c) 2022 Realtek Semiconductor Corp.
+ */
+
+#ifndef __RT1318_SDW_H__
+#define __RT1318_SDW_H__
+
+#include <linux/regmap.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_type.h>
+#include <linux/soundwire/sdw_registers.h>
+#include <sound/soc.h>
+
+/* imp-defined registers */
+#define RT1318_SAPU_SM 0x3203
+
+#define R1318_TCON	0xc203
+#define R1318_TCON_RELATED_1	0xc206
+
+#define R1318_SPK_TEMPERATRUE_PROTECTION_0	0xdb00
+#define R1318_SPK_TEMPERATRUE_PROTECTION_L_4	0xdb08
+#define R1318_SPK_TEMPERATRUE_PROTECTION_R_4	0xdd08
+
+#define R1318_SPK_TEMPERATRUE_PROTECTION_L_6	0xdb12
+#define R1318_SPK_TEMPERATRUE_PROTECTION_R_6	0xdd12
+
+#define RT1318_INIT_RECIPROCAL_REG_L_24		0xdbb5
+#define RT1318_INIT_RECIPROCAL_REG_L_23_16	0xdbb6
+#define RT1318_INIT_RECIPROCAL_REG_L_15_8	0xdbb7
+#define RT1318_INIT_RECIPROCAL_REG_L_7_0	0xdbb8
+#define RT1318_INIT_RECIPROCAL_REG_R_24		0xddb5
+#define RT1318_INIT_RECIPROCAL_REG_R_23_16	0xddb6
+#define RT1318_INIT_RECIPROCAL_REG_R_15_8	0xddb7
+#define RT1318_INIT_RECIPROCAL_REG_R_7_0	0xddb8
+
+#define RT1318_INIT_R0_RECIPROCAL_SYN_L_24 0xdbc5
+#define RT1318_INIT_R0_RECIPROCAL_SYN_L_23_16 0xdbc6
+#define RT1318_INIT_R0_RECIPROCAL_SYN_L_15_8 0xdbc7
+#define RT1318_INIT_R0_RECIPROCAL_SYN_L_7_0 0xdbc8
+#define RT1318_INIT_R0_RECIPROCAL_SYN_R_24 0xddc5
+#define RT1318_INIT_R0_RECIPROCAL_SYN_R_23_16 0xddc6
+#define RT1318_INIT_R0_RECIPROCAL_SYN_R_15_8 0xddc7
+#define RT1318_INIT_R0_RECIPROCAL_SYN_R_7_0 0xddc8
+
+#define RT1318_R0_COMPARE_FLAG_L	0xdb35
+#define RT1318_R0_COMPARE_FLAG_R	0xdd35
+
+#define RT1318_STP_INITIAL_RS_TEMP_H 0xdd93
+#define RT1318_STP_INITIAL_RS_TEMP_L 0xdd94
+
+/* RT1318 SDCA Control - function number */
+#define FUNC_NUM_SMART_AMP 0x04
+
+/* RT1318 SDCA entity */
+#define RT1318_SDCA_ENT_PDE23 0x31
+#define RT1318_SDCA_ENT_XU24 0x24
+#define RT1318_SDCA_ENT_FU21 0x03
+#define RT1318_SDCA_ENT_UDMPU21 0x02
+#define RT1318_SDCA_ENT_CS21 0x21
+#define RT1318_SDCA_ENT_SAPU 0x29
+
+/* RT1318 SDCA control */
+#define RT1318_SDCA_CTL_SAMPLE_FREQ_INDEX 0x10
+#define RT1318_SDCA_CTL_REQ_POWER_STATE 0x01
+#define RT1318_SDCA_CTL_FU_MUTE 0x01
+#define RT1318_SDCA_CTL_FU_VOLUME 0x02
+#define RT1318_SDCA_CTL_UDMPU_CLUSTER 0x10
+#define RT1318_SDCA_CTL_SAPU_PROTECTION_MODE 0x10
+#define RT1318_SDCA_CTL_SAPU_PROTECTION_STATUS 0x11
+
+/* RT1318 SDCA channel */
+#define CH_L 0x01
+#define CH_R 0x02
+
+/* sample frequency index */
+#define RT1318_SDCA_RATE_16000HZ		0x04
+#define RT1318_SDCA_RATE_32000HZ		0x07
+#define RT1318_SDCA_RATE_44100HZ		0x08
+#define RT1318_SDCA_RATE_48000HZ		0x09
+#define RT1318_SDCA_RATE_96000HZ		0x0b
+#define RT1318_SDCA_RATE_192000HZ		0x0d
+
+
+struct rt1318_sdw_priv {
+	struct snd_soc_component *component;
+	struct regmap *regmap;
+	struct sdw_slave *sdw_slave;
+	enum sdw_slave_status status;
+	struct sdw_bus_params params;
+	bool hw_init;
+	bool first_hw_init;
+};
+
+struct sdw_stream_data {
+	struct sdw_stream_runtime *sdw_stream;
+};
+
+#endif /* __RT1318_SDW_H__ */