@@ -304,7 +304,8 @@ static void line6_data_received(struct urb *urb)
for (;;) {
done =
line6_midibuf_read(mb, line6->buffer_message,
- LINE6_MIDI_MESSAGE_MAXLEN);
+ LINE6_MIDI_MESSAGE_MAXLEN,
+ LINE6_MIDIBUF_READ_RX);
if (done <= 0)
break;
@@ -56,7 +56,8 @@ static void line6_midi_transmit(struct snd_rawmidi_substream *substream)
for (;;) {
done = line6_midibuf_read(mb, chunk,
- LINE6_FALLBACK_MAXPACKETSIZE);
+ LINE6_FALLBACK_MAXPACKETSIZE,
+ LINE6_MIDIBUF_READ_TX);
if (done == 0)
break;
@@ -9,6 +9,7 @@
#include "midibuf.h"
+
static int midibuf_message_length(unsigned char code)
{
int message_length;
@@ -20,12 +21,7 @@ static int midibuf_message_length(unsigned char code)
message_length = length[(code >> 4) - 8];
} else {
- /*
- Note that according to the MIDI specification 0xf2 is
- the "Song Position Pointer", but this is used by Line 6
- to send sysex messages to the host.
- */
- static const int length[] = { -1, 2, -1, 2, -1, -1, 1, 1, 1, 1,
+ static const int length[] = { -1, 2, 2, 2, -1, -1, 1, 1, 1, -1,
1, 1, 1, -1, 1, 1
};
message_length = length[code & 0x0f];
@@ -125,7 +121,7 @@ int line6_midibuf_write(struct midi_buffer *this, unsigned char *data,
}
int line6_midibuf_read(struct midi_buffer *this, unsigned char *data,
- int length)
+ int length, int read_type)
{
int bytes_used;
int length1, length2;
@@ -148,9 +144,22 @@ int line6_midibuf_read(struct midi_buffer *this, unsigned char *data,
length1 = this->size - this->pos_read;
- /* check MIDI command length */
command = this->buf[this->pos_read];
+ /*
+ PODxt always has status byte lower nibble set to 0010,
+ when it means to send 0000, so we correct if here so
+ that control/program changes come on channel 1 and
+ sysex message status byte is correct
+ */
+ if (read_type == LINE6_MIDIBUF_READ_RX) {
+ if (command == 0xb2 || command == 0xc2 || command == 0xf2) {
+ unsigned char fixed = command & 0xf0;
+ this->buf[this->pos_read] = fixed;
+ command = fixed;
+ }
+ }
+ /* check MIDI command length */
if (command & 0x80) {
midi_length = midibuf_message_length(command);
this->command_prev = command;
@@ -8,6 +8,9 @@
#ifndef MIDIBUF_H
#define MIDIBUF_H
+#define LINE6_MIDIBUF_READ_TX 0
+#define LINE6_MIDIBUF_READ_RX 1
+
struct midi_buffer {
unsigned char *buf;
int size;
@@ -23,7 +26,7 @@ extern void line6_midibuf_destroy(struct midi_buffer *mb);
extern int line6_midibuf_ignore(struct midi_buffer *mb, int length);
extern int line6_midibuf_init(struct midi_buffer *mb, int size, int split);
extern int line6_midibuf_read(struct midi_buffer *mb, unsigned char *data,
- int length);
+ int length, int read_type);
extern void line6_midibuf_reset(struct midi_buffer *mb);
extern int line6_midibuf_write(struct midi_buffer *mb, unsigned char *data,
int length);
@@ -159,8 +159,9 @@ static struct line6_pcm_properties pod_pcm_properties = {
.bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
};
+
static const char pod_version_header[] = {
- 0xf2, 0x7e, 0x7f, 0x06, 0x02
+ 0xf0, 0x7e, 0x7f, 0x06, 0x02
};
static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
A PODxt device sends 0xb2, 0xc2 or 0xf2 as a status byte for MIDI messages over USB that should otherwise have a 0xb0, 0xc0 or 0xf0 status byte. This is usually corrected by the driver on other OSes. This fixes MIDI sysex messages sent by PODxt. Signed-off-by: Artem Egorkine <arteme@gmail.com> --- sound/usb/line6/driver.c | 3 ++- sound/usb/line6/midi.c | 3 ++- sound/usb/line6/midibuf.c | 25 +++++++++++++++++-------- sound/usb/line6/midibuf.h | 5 ++++- sound/usb/line6/pod.c | 3 ++- 5 files changed, 27 insertions(+), 12 deletions(-)