| Message ID | 20230102114152.297305-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | d5ce5d3895a33fa8e0dce89c2404facbdef55dcb |
| Headers | show |
| Series | [1/8] ASoC: codecs: wsa883x: Simplify &pdev->dev in probe | expand |
On Mon, 02 Jan 2023 12:41:45 +0100, Krzysztof Kozlowski wrote: > The probe already stores pointer to &pdev->dev, so use it to make the > code a bit easier to read. > > Applied to broonie/sound.git for-next Thanks! [1/8] ASoC: codecs: wsa883x: Simplify &pdev->dev in probe commit: d5ce5d3895a33fa8e0dce89c2404facbdef55dcb [2/8] ASoC: codecs: wsa881x: Simplify &pdev->dev in probe commit: c617c9e7024d152426acf9f1aaf01070b6852f13 [3/8] ASoC: codecs: wsa881x: Simplify with dev_err_probe commit: 31a90367443b21f76b972c00aad3430447c999d6 [4/8] ASoC: codecs: wsa881x: Use proper shutdown GPIO polarity commit: 738455858a2d21b769f673892546cf8300c9fd78 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c index 966ba4909204..8d69ed340e83 100644 --- a/sound/soc/codecs/wsa883x.c +++ b/sound/soc/codecs/wsa883x.c @@ -1375,7 +1375,7 @@ static int wsa883x_probe(struct sdw_slave *pdev, struct device *dev = &pdev->dev; int ret; - wsa883x = devm_kzalloc(&pdev->dev, sizeof(*wsa883x), GFP_KERNEL); + wsa883x = devm_kzalloc(dev, sizeof(*wsa883x), GFP_KERNEL); if (!wsa883x) return -ENOMEM; @@ -1388,17 +1388,17 @@ static int wsa883x_probe(struct sdw_slave *pdev, if (ret) return dev_err_probe(dev, ret, "Failed to enable vdd regulator\n"); - wsa883x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown", + wsa883x->sd_n = devm_gpiod_get_optional(dev, "powerdown", GPIOD_FLAGS_BIT_NONEXCLUSIVE | GPIOD_OUT_HIGH); if (IS_ERR(wsa883x->sd_n)) { - ret = dev_err_probe(&pdev->dev, PTR_ERR(wsa883x->sd_n), + ret = dev_err_probe(dev, PTR_ERR(wsa883x->sd_n), "Shutdown Control GPIO not found\n"); goto err; } - dev_set_drvdata(&pdev->dev, wsa883x); + dev_set_drvdata(dev, wsa883x); wsa883x->slave = pdev; - wsa883x->dev = &pdev->dev; + wsa883x->dev = dev; wsa883x->sconfig.ch_count = 1; wsa883x->sconfig.bps = 1; wsa883x->sconfig.direction = SDW_DATA_DIR_RX; @@ -1413,7 +1413,7 @@ static int wsa883x_probe(struct sdw_slave *pdev, wsa883x->regmap = devm_regmap_init_sdw(pdev, &wsa883x_regmap_config); if (IS_ERR(wsa883x->regmap)) { gpiod_direction_output(wsa883x->sd_n, 1); - ret = dev_err_probe(&pdev->dev, PTR_ERR(wsa883x->regmap), + ret = dev_err_probe(dev, PTR_ERR(wsa883x->regmap), "regmap_init failed\n"); goto err; } @@ -1423,7 +1423,7 @@ static int wsa883x_probe(struct sdw_slave *pdev, pm_runtime_set_active(dev); pm_runtime_enable(dev); - ret = devm_snd_soc_register_component(&pdev->dev, + ret = devm_snd_soc_register_component(dev, &wsa883x_component_drv, wsa883x_dais, ARRAY_SIZE(wsa883x_dais));
The probe already stores pointer to &pdev->dev, so use it to make the code a bit easier to read. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- sound/soc/codecs/wsa883x.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)