diff mbox series

[v3,1/8] soundwire: stream: Add specific prep/deprep commands to port_prep callback

Message ID 20230127165111.3010960-2-sbinding@opensource.cirrus.com (mailing list archive)
State Accepted
Commit 43f1a7f905fcc796620c6488a7098068a05484ca
Headers show
Series ASoC: cs42l42: Add SoundWire support | expand

Commit Message

Stefan Binding Jan. 27, 2023, 4:51 p.m. UTC
Currently, port_prep callback only has commands for PRE_PREP, PREP,
and POST_PREP, which doesn't directly say whether this is for a
prepare or deprepare call. Extend the command list enum to say
whether the call is for prepare or deprepare aswell.

Also remove SDW_OPS_PORT_PREP from sdw_port_prep_ops as this is unused,
and update this enum to be simpler and more consistent with enum
sdw_clk_stop_type.

Note: Currently, the only users of SDW_OPS_PORT_POST_PREP are codec
drivers sound/soc/codecs/wsa881x.c and sound/soc/codecs/wsa883x.c, both
of which seem to assume that POST_PREP only occurs after a prepare,
even though it would also have occurred after a deprepare. Since it
doesn't make sense to mark the port prepared after a deprepare, changing
the enum to separate PORT_DEPREP from PORT_PREP should make the check
for PORT_PREP in those drivers be more logical.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 drivers/soundwire/stream.c    | 4 ++--
 include/linux/soundwire/sdw.h | 8 +++++---
 2 files changed, 7 insertions(+), 5 deletions(-)

Comments

Vinod Koul Jan. 31, 2023, 11:02 a.m. UTC | #1
On 27-01-23, 16:51, Stefan Binding wrote:
> Currently, port_prep callback only has commands for PRE_PREP, PREP,
> and POST_PREP, which doesn't directly say whether this is for a
> prepare or deprepare call. Extend the command list enum to say
> whether the call is for prepare or deprepare aswell.
> 
> Also remove SDW_OPS_PORT_PREP from sdw_port_prep_ops as this is unused,
> and update this enum to be simpler and more consistent with enum
> sdw_clk_stop_type.
> 
> Note: Currently, the only users of SDW_OPS_PORT_POST_PREP are codec
> drivers sound/soc/codecs/wsa881x.c and sound/soc/codecs/wsa883x.c, both
> of which seem to assume that POST_PREP only occurs after a prepare,
> even though it would also have occurred after a deprepare. Since it
> doesn't make sense to mark the port prepared after a deprepare, changing
> the enum to separate PORT_DEPREP from PORT_PREP should make the check
> for PORT_PREP in those drivers be more logical.

Acked-By: Vinod Koul <vkoul@kernel.org>
diff mbox series

Patch

diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index df3b36670df4c..1652fb5737d9d 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -469,7 +469,7 @@  static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 	}
 
 	/* Inform slave about the impending port prepare */
-	sdw_do_port_prep(s_rt, prep_ch, SDW_OPS_PORT_PRE_PREP);
+	sdw_do_port_prep(s_rt, prep_ch, prep ? SDW_OPS_PORT_PRE_PREP : SDW_OPS_PORT_PRE_DEPREP);
 
 	/* Prepare Slave port implementing CP_SM */
 	if (!dpn_prop->simple_ch_prep_sm) {
@@ -501,7 +501,7 @@  static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 	}
 
 	/* Inform slaves about ports prepared */
-	sdw_do_port_prep(s_rt, prep_ch, SDW_OPS_PORT_POST_PREP);
+	sdw_do_port_prep(s_rt, prep_ch, prep ? SDW_OPS_PORT_POST_PREP : SDW_OPS_PORT_POST_DEPREP);
 
 	/* Disable interrupt after Port de-prepare */
 	if (!prep && intr)
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 3cd2a761911ff..547fc1b30a51a 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -569,13 +569,15 @@  struct sdw_prepare_ch {
  * enum sdw_port_prep_ops: Prepare operations for Data Port
  *
  * @SDW_OPS_PORT_PRE_PREP: Pre prepare operation for the Port
- * @SDW_OPS_PORT_PREP: Prepare operation for the Port
+ * @SDW_OPS_PORT_PRE_DEPREP: Pre deprepare operation for the Port
  * @SDW_OPS_PORT_POST_PREP: Post prepare operation for the Port
+ * @SDW_OPS_PORT_POST_DEPREP: Post deprepare operation for the Port
  */
 enum sdw_port_prep_ops {
 	SDW_OPS_PORT_PRE_PREP = 0,
-	SDW_OPS_PORT_PREP = 1,
-	SDW_OPS_PORT_POST_PREP = 2,
+	SDW_OPS_PORT_PRE_DEPREP,
+	SDW_OPS_PORT_POST_PREP,
+	SDW_OPS_PORT_POST_DEPREP,
 };
 
 /**