@@ -314,6 +314,7 @@ config SND_SOC_ALL_CODECS
imply SND_SOC_WM9713
imply SND_SOC_WSA881X
imply SND_SOC_WSA883X
+ imply SND_SOC_X9250
imply SND_SOC_ZL38060
help
Normally ASoC codec drivers are only built if a machine driver which
@@ -2053,6 +2054,16 @@ config SND_SOC_WSA883X
This enables support for Qualcomm WSA8830/WSA8835 Class-D
Smart Speaker Amplifier.
+config SND_SOC_X9250
+ tristate "Renesas X9250 quad controlled potentiometers"
+ depends on SPI
+ help
+ Enable support for the Renesas X9250 quad controlled
+ potentiometers.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-soc-x9250.
+
config SND_SOC_ZL38060
tristate "Microsemi ZL38060 Connected Home Audio Processor"
depends on SPI_MASTER
@@ -346,6 +346,7 @@ snd-soc-wm9713-objs := wm9713.o
snd-soc-wm-hubs-objs := wm_hubs.o
snd-soc-wsa881x-objs := wsa881x.o
snd-soc-wsa883x-objs := wsa883x.o
+snd-soc-x9250-objs := x9250.o
snd-soc-zl38060-objs := zl38060.o
# Amp
snd-soc-max9877-objs := max9877.o
@@ -708,6 +709,7 @@ obj-$(CONFIG_SND_SOC_WM_ADSP) += snd-soc-wm-adsp.o
obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o
obj-$(CONFIG_SND_SOC_WSA881X) += snd-soc-wsa881x.o
obj-$(CONFIG_SND_SOC_WSA883X) += snd-soc-wsa883x.o
+obj-$(CONFIG_SND_SOC_X9250) += snd-soc-x9250.o
obj-$(CONFIG_SND_SOC_ZL38060) += snd-soc-zl38060.o
# Amp
new file mode 100644
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// x9250.c -- Renesas X9250 ALSA SoC driver
+//
+// Copyright 2023 CS GROUP France
+//
+// Author: Herve Codina <herve.codina@bootlin.com>
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#define X9250_NB_CHANNEL 4
+
+struct x9250 {
+ struct spi_device *spi;
+ u8 spi_tx_buf[3]; /* Cannot use stack area for SPI (dma-safe memory) */
+ u8 spi_rx_buf[3]; /* Cannot use stack area for SPI (dma-safe memory) */
+ int cmd_inv;
+};
+
+#define X9250_CMD_RD_WCR(_p) (0x90 | (_p))
+#define X9250_CMD_WR_WCR(_p) (0xa0 | (_p))
+
+static int x9250_write8(struct x9250 *x9250, u8 cmd, u8 val)
+{
+ struct spi_transfer xfer = {
+ .tx_buf = &x9250->spi_tx_buf,
+ .len = 3,
+ };
+
+ BUILD_BUG_ON(sizeof(x9250->spi_tx_buf) < 3);
+
+ x9250->spi_tx_buf[0] = 0x50;
+ x9250->spi_tx_buf[1] = cmd;
+ x9250->spi_tx_buf[2] = val;
+
+ return spi_sync_transfer(x9250->spi, &xfer, 1);
+}
+
+static int x9250_read8(struct x9250 *x9250, u8 cmd, u8 *val)
+{
+ struct spi_transfer xfer = {
+ .tx_buf = &x9250->spi_tx_buf,
+ .rx_buf = &x9250->spi_rx_buf,
+ .len = 3,
+ };
+ int ret;
+
+ BUILD_BUG_ON(sizeof(x9250->spi_tx_buf) < 3);
+ BUILD_BUG_ON(sizeof(x9250->spi_rx_buf) < 3);
+
+ x9250->spi_tx_buf[0] = 0x50;
+ x9250->spi_tx_buf[1] = cmd;
+
+ ret = spi_sync_transfer(x9250->spi, &xfer, 1);
+ if (ret)
+ return ret;
+
+ *val = x9250->spi_rx_buf[2];
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget x9250_dapm_widgets[] = {
+ SND_SOC_DAPM_INPUT("IN0"),
+ SND_SOC_DAPM_INPUT("IN1"),
+ SND_SOC_DAPM_INPUT("IN2"),
+ SND_SOC_DAPM_INPUT("IN3"),
+
+ SND_SOC_DAPM_PGA("CH0 PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("CH1 PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("CH2 PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("CH3 PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_OUTPUT("OUT0"),
+ SND_SOC_DAPM_OUTPUT("OUT1"),
+ SND_SOC_DAPM_OUTPUT("OUT2"),
+ SND_SOC_DAPM_OUTPUT("OUT3"),
+};
+
+static const struct snd_soc_dapm_route x9250_dapm_routes[] = {
+ { "CH0 PGA", NULL, "IN0" },
+ { "CH1 PGA", NULL, "IN1" },
+ { "CH2 PGA", NULL, "IN2" },
+ { "CH3 PGA", NULL, "IN3" },
+
+ { "OUT0", NULL, "CH0 PGA" },
+ { "OUT1", NULL, "CH1 PGA" },
+ { "OUT2", NULL, "CH2 PGA" },
+ { "OUT3", NULL, "CH3 PGA" },
+};
+
+static int x8250_kctrl_cmd_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value;
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ struct x9250 *x9250 = snd_soc_component_get_drvdata(component);
+ int min = mc->min;
+ int max = mc->max;
+ unsigned int mask = (1 << fls(max)) - 1;
+ unsigned int invert = mc->invert;
+ int ret;
+ u8 val;
+ u8 wcr;
+
+ wcr = mc->reg;
+ if (wcr > 4)
+ return -EINVAL;
+
+ ret = x9250_read8(x9250, X9250_CMD_RD_WCR(wcr), &val);
+ if (ret)
+ return ret;
+
+ ucontrol->value.integer.value[0] = (val & mask) - min;
+ if (invert)
+ ucontrol->value.integer.value[0] = max - ucontrol->value.integer.value[0];
+
+ return 0;
+}
+
+static int x8250_kctrl_cmd_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value;
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ struct x9250 *x9250 = snd_soc_component_get_drvdata(component);
+ int min = mc->min;
+ int max = mc->max;
+ unsigned int mask = (1 << fls(max)) - 1;
+ unsigned int invert = mc->invert;
+ unsigned int val;
+ int ret;
+ u8 wcr;
+ u8 tmp;
+
+ wcr = mc->reg;
+ if (wcr > 4)
+ return -EINVAL;
+
+ val = ucontrol->value.integer.value[0];
+ if (val < 0)
+ return -EINVAL;
+ if (val > max - min)
+ return -EINVAL;
+
+ val = (val + min) & mask;
+ if (invert)
+ val = max - val;
+
+ ret = x9250_read8(x9250, X9250_CMD_RD_WCR(wcr), &tmp);
+ if (ret)
+ return ret;
+
+ if (tmp == val)
+ return 0;
+
+ ret = x9250_write8(x9250, X9250_CMD_WR_WCR(wcr), val);
+ if (ret)
+ return ret;
+
+ return 1; /* The value changed */
+}
+
+static const struct snd_kcontrol_new x9250_controls_std[] = {
+ SOC_SINGLE_EXT("CMD0", 0, 0, 255, 0, x8250_kctrl_cmd_get, x8250_kctrl_cmd_put),
+ SOC_SINGLE_EXT("CMD1", 1, 0, 255, 0, x8250_kctrl_cmd_get, x8250_kctrl_cmd_put),
+ SOC_SINGLE_EXT("CMD2", 2, 0, 255, 0, x8250_kctrl_cmd_get, x8250_kctrl_cmd_put),
+ SOC_SINGLE_EXT("CMD3", 3, 0, 255, 0, x8250_kctrl_cmd_get, x8250_kctrl_cmd_put),
+};
+
+static const struct snd_kcontrol_new x9250_controls_inv[] = {
+ SOC_SINGLE_EXT("CMD0", 0, 0, 255, 1, x8250_kctrl_cmd_get, x8250_kctrl_cmd_put),
+ SOC_SINGLE_EXT("CMD1", 1, 0, 255, 1, x8250_kctrl_cmd_get, x8250_kctrl_cmd_put),
+ SOC_SINGLE_EXT("CMD2", 2, 0, 255, 1, x8250_kctrl_cmd_get, x8250_kctrl_cmd_put),
+ SOC_SINGLE_EXT("CMD3", 3, 0, 255, 1, x8250_kctrl_cmd_get, x8250_kctrl_cmd_put),
+};
+
+static int x9250_component_probe(struct snd_soc_component *component)
+{
+ struct x9250 *x9250 = snd_soc_component_get_drvdata(component);
+ struct snd_kcontrol_new control[X9250_NB_CHANNEL];
+ int ret;
+ u8 wcr;
+ int i;
+
+ /* Check arrays compatibility */
+ BUILD_BUG_ON(ARRAY_SIZE(x9250_controls_std) != X9250_NB_CHANNEL);
+ BUILD_BUG_ON(ARRAY_SIZE(x9250_controls_inv) != X9250_NB_CHANNEL);
+ BUILD_BUG_ON(sizeof(control[0]) != sizeof(x9250_controls_std[0]));
+ BUILD_BUG_ON(sizeof(control[0]) != sizeof(x9250_controls_inv[0]));
+
+ for (i = 0; i < X9250_NB_CHANNEL; i++) {
+ if (x9250->cmd_inv & (1 << i)) {
+ wcr = 0xff;
+ memcpy(&control[i], &x9250_controls_inv[i], sizeof(control[i]));
+ } else {
+ wcr = 0x00;
+ memcpy(&control[i], &x9250_controls_std[i], sizeof(control[i]));
+ }
+ ret = x9250_write8(x9250, X9250_CMD_WR_WCR(i), wcr);
+ if (ret)
+ return ret;
+ }
+
+ return snd_soc_add_component_controls(component, control, ARRAY_SIZE(control));
+}
+
+static const struct snd_soc_component_driver x9250_component_driver = {
+ .probe = x9250_component_probe,
+ .dapm_widgets = x9250_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(x9250_dapm_widgets),
+ .dapm_routes = x9250_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(x9250_dapm_routes),
+};
+
+static int x9250_spi_probe(struct spi_device *spi)
+{
+ struct x9250 *x9250;
+ int ret;
+
+ spi->bits_per_word = 8;
+ ret = spi_setup(spi);
+ if (ret < 0)
+ return ret;
+
+ x9250 = devm_kzalloc(&spi->dev, sizeof(*x9250), GFP_KERNEL);
+ if (x9250 == NULL)
+ return -ENOMEM;
+
+ x9250->spi = spi;
+
+ x9250->cmd_inv = 0;
+ if (of_property_read_bool(spi->dev.of_node, "renesas,cmd0-invert"))
+ x9250->cmd_inv |= (1 << 0);
+ if (of_property_read_bool(spi->dev.of_node, "renesas,cmd1-invert"))
+ x9250->cmd_inv |= (1 << 1);
+ if (of_property_read_bool(spi->dev.of_node, "renesas,cmd2-invert"))
+ x9250->cmd_inv |= (1 << 2);
+ if (of_property_read_bool(spi->dev.of_node, "renesas,cmd3-invert"))
+ x9250->cmd_inv |= (1 << 3);
+
+ spi_set_drvdata(spi, x9250);
+
+ return devm_snd_soc_register_component(&spi->dev, &x9250_component_driver,
+ NULL, 0);
+}
+
+static const struct of_device_id x9250_of_match[] = {
+ { .compatible = "renesas,x9250", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, x9250_of_match);
+
+static const struct spi_device_id x9250_id_table[] = {
+ { "x9250", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, x9250_id_table);
+
+static struct spi_driver x9250_spi_driver = {
+ .driver = {
+ .name = "x9250",
+ .of_match_table = x9250_of_match,
+ },
+ .id_table = x9250_id_table,
+ .probe = x9250_spi_probe,
+};
+
+module_spi_driver(x9250_spi_driver);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
+MODULE_DESCRIPTION("X9250 ALSA SoC driver");
+MODULE_LICENSE("GPL");
The Renesas X9250 is a quad digitally controlled potentiometers. Signed-off-by: Herve Codina <herve.codina@bootlin.com> --- sound/soc/codecs/Kconfig | 11 ++ sound/soc/codecs/Makefile | 2 + sound/soc/codecs/x9250.c | 276 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 289 insertions(+) create mode 100644 sound/soc/codecs/x9250.c