diff mbox series

[ASoC:,da7219:,Add,Jack,insertion,detection,polarity,selection,1/2] ASoC: dt-bindings: dialog,da7219: convert to dtschema

Message ID 20230523082101.380-1-David.Rau.opensource@dm.renesas.com (mailing list archive)
State Accepted
Commit 345585b776e6f6f1cab846eb3efbef32c53fc0e3
Headers show
Series [ASoC:,da7219:,Add,Jack,insertion,detection,polarity,selection,1/2] ASoC: dt-bindings: dialog,da7219: convert to dtschema | expand

Commit Message

David Rau May 23, 2023, 8:21 a.m. UTC
- Convert Dialog DA7219 bindings to DT schema format.
- Remove unused `dlg,ldo-lvl` property.

Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
---
 .../devicetree/bindings/sound/da7219.txt      | 112 ---------
 .../bindings/sound/dialog,da7219.yaml         | 230 ++++++++++++++++++
 2 files changed, 230 insertions(+), 112 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/da7219.txt
 create mode 100644 Documentation/devicetree/bindings/sound/dialog,da7219.yaml

Comments

David Rau May 23, 2023, 4:28 p.m. UTC | #1
Please ignore the patch.
Thanks.

-----Original Message-----
From: David.Rau.opensource <David.Rau.opensource@dm.renesas.com> 
Sent: Tuesday, May 23, 2023 16:21
To: conor+dt@kernel.org
Cc: support.opensource@diasemi.com; lgirdwood@gmail.com; broonie@kernel.org; robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; alsa-devel@alsa-project.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; David.Rau.opensource <David.Rau.opensource@dm.renesas.com>
Subject: [ASoC: da7219: Add Jack insertion detection polarity selection 1/2] ASoC: dt-bindings: dialog,da7219: convert to dtschema

- Convert Dialog DA7219 bindings to DT schema format.
- Remove unused `dlg,ldo-lvl` property.

Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
---
 .../devicetree/bindings/sound/da7219.txt      | 112 ---------
 .../bindings/sound/dialog,da7219.yaml         | 230 ++++++++++++++++++
 2 files changed, 230 insertions(+), 112 deletions(-)  delete mode 100644 Documentation/devicetree/bindings/sound/da7219.txt
 create mode 100644 Documentation/devicetree/bindings/sound/dialog,da7219.yaml

diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt
deleted file mode 100644
index add1caf26ac2..000000000000
--- a/Documentation/devicetree/bindings/sound/da7219.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Dialog Semiconductor DA7219 Audio Codec bindings
-
-DA7219 is an audio codec with advanced accessory detect features.
-
-======
-
-Required properties:
-- compatible : Should be "dlg,da7219"
-- reg: Specifies the I2C slave address
-
-- interrupts : IRQ line info for DA7219.
-  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-   further information relating to interrupt properties)
-
-- VDD-supply: VDD power supply for the device
-- VDDMIC-supply: VDDMIC power supply for the device
-- VDDIO-supply: VDDIO power supply for the device
-  (See Documentation/devicetree/bindings/regulator/regulator.txt for further
-   information relating to regulators)
-
-Optional properties:
-- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
-  interrupt is to be used to wake system, otherwise "irq" should be used.
-- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
-
-- #clock-cells :  Should be set to '<1>', two clock sources provided;
-- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK);
-
-- clocks : phandle and clock specifier for codec MCLK.
-- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
-
-- dlg,micbias-lvl : Voltage (mV) for Mic Bias
-	[<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
-- dlg,mic-amp-in-sel : Mic input source type
-	["diff", "se_p", "se_n"]
-
-Deprecated properties:
-- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
-  (LDO unavailable in production HW so property no longer required).
-
-======
-
-Child node - 'da7219_aad':
-
-Optional properties:
-- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
-	[<2800>, <2900>]
-- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
-- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
-	[<2>, <5>, <10>, <50>, <100>, <200>, <500>]
-- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
-	[<200>, <500>, <750>, <1000>]
-- dlg,jack-ins-deb : Debounce time for jack insertion (ms)
-	[<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>]
-- dlg,jack-det-rate: Jack type detection latency (3/4 pole)
-	["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"]
-- dlg,jack-rem-deb : Debounce time for jack removal (ms)
-	[<1>, <5>, <10>, <20>]
-- dlg,a-d-btn-thr : Impedance threshold between buttons A and D
-	[0x0 - 0xFF]
-- dlg,d-b-btn-thr : Impedance threshold between buttons D and B
-	[0x0 - 0xFF]
-- dlg,b-c-btn-thr : Impedance threshold between buttons B and C
-	[0x0 - 0xFF]
-- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
-	[0x0 - 0xFF]
-- dlg,btn-avg : Number of 8-bit readings for averaged button measurement
-	[<1>, <2>, <4>, <8>]
-- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
-	[<1>, <2>, <4>, <8>]
-
-======
-
-Example:
-
-	codec: da7219@1a {
-		compatible = "dlg,da7219";
-		reg = <0x1a>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
-		VDD-supply = <&reg_audio>;
-		VDDMIC-supply = <&reg_audio>;
-		VDDIO-supply = <&reg_audio>;
-
-		#clock-cells = <1>;
-		clock-output-names = "dai-wclk", "dai-bclk";
-
-		clocks = <&clks 201>;
-		clock-names = "mclk";
-
-		dlg,ldo-lvl = <1200>;
-		dlg,micbias-lvl = <2600>;
-		dlg,mic-amp-in-sel = "diff";
-
-		da7219_aad {
-			dlg,btn-cfg = <50>;
-			dlg,mic-det-thr = <500>;
-			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
-			dlg,jack-rem-deb = <1>;
-
-			dlg,a-d-btn-thr = <0xa>;
-			dlg,d-b-btn-thr = <0x16>;
-			dlg,b-c-btn-thr = <0x21>;
-			dlg,c-mic-btn-thr = <0x3E>;
-
-			dlg,btn-avg = <4>;
-			dlg,adc-1bit-rpt = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml
new file mode 100644
index 000000000000..9160f68696dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml
@@ -0,0 +1,230 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dialog,da7219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA7219 Audio Codec
+
+maintainers:
+  - David Rau <David.Rau.opensource@dm.renesas.com>
+
+description:
+  The DA7219 is an ultra low-power audio codec with
+  in-built advanced accessory detection (AAD) for mobile
+  computing and accessory applications, which supports
+  sample rates up to 96 kHz at 24-bit resolution.
+
+properties:
+  compatible:
+    const: dlg,da7219
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  VDD-supply:
+    description:
+      VDD power supply for the device.
+
+  VDDMIC-supply:
+    description:
+      VDDMIC power supply for the device.
+
+  VDDIO-supply:
+    description:
+      VDDIO power supply for the device.
+
+  interrupt-names:
+    description:
+      Should be "wakeup" if interrupt is to be used to wake system,
+      otherwise "irq" should be used.
+    enum:
+      - wakeup
+      - irq
+
+  wakeup-source:
+    type: boolean
+    description:
+      Flag to indicate this device can wake system (suspend/resume).
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 2
+    description:
+      Name given for DAI WCLK and BCLK outputs.
+
+  clocks:
+    maxItems: 1
+    description:
+      phandle and clock specifier for codec MCLK.
+
+  clock-names:
+    const: mclk
+
+  dlg,micbias-lvl:
+    enum: [1600, 1800, 2000, 2200, 2400, 2600]
+    description:
+      Voltage (mV) for Mic Bias.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  dlg,mic-amp-in-sel:
+    enum: ["diff", "se_p", "se_n"]
+    description:
+      Mic input source type.
+
+      diff - Differential.
+
+      se_p - MIC_P.
+      Positive differential analog microphone input.
+
+      se_n - MIC_N.
+      Negative differential analog microphone input.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  da7219_aad:
+    type: object
+    description:
+      Configuration of advanced accessory detection.
+    properties:
+      dlg,micbias-pulse-lvl:
+        enum: [2800, 2900]
+        description:
+          Mic bias higher voltage pulse level (mV).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,micbias-pulse-time:
+        description:
+          Mic bias higher voltage pulse duration (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+
+      dlg,btn-cfg:
+        enum: [2, 5, 10, 50, 100, 200, 500]
+        description:
+          Periodic button press measurements for 4-pole jack (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,mic-det-thr:
+        enum: [200, 500, 750, 1000]
+        description:
+          Impedance threshold for mic detection measurement (Ohms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,jack-ins-deb:
+        enum: [5, 10, 20, 50, 100, 200, 500, 1000]
+        description:
+          Debounce time for jack insertion (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,jack-det-rate:
+        enum: ["32_64", "64_128", "128_256", "256_512"]
+        description:
+          Jack type (3/4 pole) detection latency (ms).
+        $ref: /schemas/types.yaml#/definitions/string
+
+      dlg,jack-rem-deb:
+        enum: [1, 5, 10, 20]
+        description:
+          Debounce time for jack removal (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,a-d-btn-thr:
+        description:
+          Impedance threshold between buttons A and D.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,d-b-btn-thr:
+        description:
+          Impedance threshold between buttons D and B.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,b-c-btn-thr:
+        description:
+          Impedance threshold between buttons B and C.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,c-mic-btn-thr:
+        description:
+          Impedance threshold between button C and Mic.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,btn-avg:
+        enum: [1, 2, 4, 8]
+        description:
+          Number of 8-bit readings for averaged button measurement.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,adc-1bit-rpt:
+        enum: [1, 2, 4, 8]
+        description:
+          Repeat count for 1-bit button measurement.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - VDD-supply
+  - VDDMIC-supply
+  - VDDIO-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      codec: da7219@1a {
+          compatible = "dlg,da7219";
+          reg = <0x1a>;
+
+          interrupt-parent = <&gpio6>;
+          interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+          VDD-supply = <&vdd_reg>;
+          VDDMIC-supply = <&vddmic_reg>;
+          VDDIO-supply = <&vddio_reg>;
+
+          #clock-cells = <1>;
+          clock-output-names = "da7219-dai-wclk", "da7219-dai-bclk";
+
+          clocks = <&clks 201>;
+          clock-names = "mclk";
+
+          dlg,micbias-lvl = <2600>;
+          dlg,mic-amp-in-sel = "diff";
+
+          da7219_aad {
+              dlg,btn-cfg = <50>;
+              dlg,mic-det-thr = <500>;
+              dlg,jack-ins-deb = <20>;
+              dlg,jack-det-rate = "32_64";
+              dlg,jack-rem-deb = <1>;
+
+              dlg,a-d-btn-thr = <0xa>;
+              dlg,d-b-btn-thr = <0x16>;
+              dlg,b-c-btn-thr = <0x21>;
+              dlg,c-mic-btn-thr = <0x3E>;
+
+              dlg,btn-avg = <4>;
+              dlg,adc-1bit-rpt = <1>;
+          };
+      };
+    };
--
2.17.1
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt
deleted file mode 100644
index add1caf26ac2..000000000000
--- a/Documentation/devicetree/bindings/sound/da7219.txt
+++ /dev/null
@@ -1,112 +0,0 @@ 
-Dialog Semiconductor DA7219 Audio Codec bindings
-
-DA7219 is an audio codec with advanced accessory detect features.
-
-======
-
-Required properties:
-- compatible : Should be "dlg,da7219"
-- reg: Specifies the I2C slave address
-
-- interrupts : IRQ line info for DA7219.
-  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-   further information relating to interrupt properties)
-
-- VDD-supply: VDD power supply for the device
-- VDDMIC-supply: VDDMIC power supply for the device
-- VDDIO-supply: VDDIO power supply for the device
-  (See Documentation/devicetree/bindings/regulator/regulator.txt for further
-   information relating to regulators)
-
-Optional properties:
-- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
-  interrupt is to be used to wake system, otherwise "irq" should be used.
-- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
-
-- #clock-cells :  Should be set to '<1>', two clock sources provided;
-- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK);
-
-- clocks : phandle and clock specifier for codec MCLK.
-- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
-
-- dlg,micbias-lvl : Voltage (mV) for Mic Bias
-	[<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
-- dlg,mic-amp-in-sel : Mic input source type
-	["diff", "se_p", "se_n"]
-
-Deprecated properties:
-- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
-  (LDO unavailable in production HW so property no longer required).
-
-======
-
-Child node - 'da7219_aad':
-
-Optional properties:
-- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
-	[<2800>, <2900>]
-- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
-- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
-	[<2>, <5>, <10>, <50>, <100>, <200>, <500>]
-- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
-	[<200>, <500>, <750>, <1000>]
-- dlg,jack-ins-deb : Debounce time for jack insertion (ms)
-	[<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>]
-- dlg,jack-det-rate: Jack type detection latency (3/4 pole)
-	["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"]
-- dlg,jack-rem-deb : Debounce time for jack removal (ms)
-	[<1>, <5>, <10>, <20>]
-- dlg,a-d-btn-thr : Impedance threshold between buttons A and D
-	[0x0 - 0xFF]
-- dlg,d-b-btn-thr : Impedance threshold between buttons D and B
-	[0x0 - 0xFF]
-- dlg,b-c-btn-thr : Impedance threshold between buttons B and C
-	[0x0 - 0xFF]
-- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
-	[0x0 - 0xFF]
-- dlg,btn-avg : Number of 8-bit readings for averaged button measurement
-	[<1>, <2>, <4>, <8>]
-- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
-	[<1>, <2>, <4>, <8>]
-
-======
-
-Example:
-
-	codec: da7219@1a {
-		compatible = "dlg,da7219";
-		reg = <0x1a>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
-		VDD-supply = <&reg_audio>;
-		VDDMIC-supply = <&reg_audio>;
-		VDDIO-supply = <&reg_audio>;
-
-		#clock-cells = <1>;
-		clock-output-names = "dai-wclk", "dai-bclk";
-
-		clocks = <&clks 201>;
-		clock-names = "mclk";
-
-		dlg,ldo-lvl = <1200>;
-		dlg,micbias-lvl = <2600>;
-		dlg,mic-amp-in-sel = "diff";
-
-		da7219_aad {
-			dlg,btn-cfg = <50>;
-			dlg,mic-det-thr = <500>;
-			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
-			dlg,jack-rem-deb = <1>;
-
-			dlg,a-d-btn-thr = <0xa>;
-			dlg,d-b-btn-thr = <0x16>;
-			dlg,b-c-btn-thr = <0x21>;
-			dlg,c-mic-btn-thr = <0x3E>;
-
-			dlg,btn-avg = <4>;
-			dlg,adc-1bit-rpt = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml
new file mode 100644
index 000000000000..9160f68696dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml
@@ -0,0 +1,230 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dialog,da7219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA7219 Audio Codec
+
+maintainers:
+  - David Rau <David.Rau.opensource@dm.renesas.com>
+
+description:
+  The DA7219 is an ultra low-power audio codec with
+  in-built advanced accessory detection (AAD) for mobile
+  computing and accessory applications, which supports
+  sample rates up to 96 kHz at 24-bit resolution.
+
+properties:
+  compatible:
+    const: dlg,da7219
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  VDD-supply:
+    description:
+      VDD power supply for the device.
+
+  VDDMIC-supply:
+    description:
+      VDDMIC power supply for the device.
+
+  VDDIO-supply:
+    description:
+      VDDIO power supply for the device.
+
+  interrupt-names:
+    description:
+      Should be "wakeup" if interrupt is to be used to wake system,
+      otherwise "irq" should be used.
+    enum:
+      - wakeup
+      - irq
+
+  wakeup-source:
+    type: boolean
+    description:
+      Flag to indicate this device can wake system (suspend/resume).
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 2
+    description:
+      Name given for DAI WCLK and BCLK outputs.
+
+  clocks:
+    maxItems: 1
+    description:
+      phandle and clock specifier for codec MCLK.
+
+  clock-names:
+    const: mclk
+
+  dlg,micbias-lvl:
+    enum: [1600, 1800, 2000, 2200, 2400, 2600]
+    description:
+      Voltage (mV) for Mic Bias.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  dlg,mic-amp-in-sel:
+    enum: ["diff", "se_p", "se_n"]
+    description:
+      Mic input source type.
+
+      diff - Differential.
+
+      se_p - MIC_P.
+      Positive differential analog microphone input.
+
+      se_n - MIC_N.
+      Negative differential analog microphone input.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  da7219_aad:
+    type: object
+    description:
+      Configuration of advanced accessory detection.
+    properties:
+      dlg,micbias-pulse-lvl:
+        enum: [2800, 2900]
+        description:
+          Mic bias higher voltage pulse level (mV).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,micbias-pulse-time:
+        description:
+          Mic bias higher voltage pulse duration (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+
+      dlg,btn-cfg:
+        enum: [2, 5, 10, 50, 100, 200, 500]
+        description:
+          Periodic button press measurements for 4-pole jack (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,mic-det-thr:
+        enum: [200, 500, 750, 1000]
+        description:
+          Impedance threshold for mic detection measurement (Ohms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,jack-ins-deb:
+        enum: [5, 10, 20, 50, 100, 200, 500, 1000]
+        description:
+          Debounce time for jack insertion (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,jack-det-rate:
+        enum: ["32_64", "64_128", "128_256", "256_512"]
+        description:
+          Jack type (3/4 pole) detection latency (ms).
+        $ref: /schemas/types.yaml#/definitions/string
+
+      dlg,jack-rem-deb:
+        enum: [1, 5, 10, 20]
+        description:
+          Debounce time for jack removal (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,a-d-btn-thr:
+        description:
+          Impedance threshold between buttons A and D.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,d-b-btn-thr:
+        description:
+          Impedance threshold between buttons D and B.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,b-c-btn-thr:
+        description:
+          Impedance threshold between buttons B and C.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,c-mic-btn-thr:
+        description:
+          Impedance threshold between button C and Mic.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,btn-avg:
+        enum: [1, 2, 4, 8]
+        description:
+          Number of 8-bit readings for averaged button measurement.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,adc-1bit-rpt:
+        enum: [1, 2, 4, 8]
+        description:
+          Repeat count for 1-bit button measurement.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - VDD-supply
+  - VDDMIC-supply
+  - VDDIO-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      codec: da7219@1a {
+          compatible = "dlg,da7219";
+          reg = <0x1a>;
+
+          interrupt-parent = <&gpio6>;
+          interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+          VDD-supply = <&vdd_reg>;
+          VDDMIC-supply = <&vddmic_reg>;
+          VDDIO-supply = <&vddio_reg>;
+
+          #clock-cells = <1>;
+          clock-output-names = "da7219-dai-wclk", "da7219-dai-bclk";
+
+          clocks = <&clks 201>;
+          clock-names = "mclk";
+
+          dlg,micbias-lvl = <2600>;
+          dlg,mic-amp-in-sel = "diff";
+
+          da7219_aad {
+              dlg,btn-cfg = <50>;
+              dlg,mic-det-thr = <500>;
+              dlg,jack-ins-deb = <20>;
+              dlg,jack-det-rate = "32_64";
+              dlg,jack-rem-deb = <1>;
+
+              dlg,a-d-btn-thr = <0xa>;
+              dlg,d-b-btn-thr = <0x16>;
+              dlg,b-c-btn-thr = <0x21>;
+              dlg,c-mic-btn-thr = <0x3E>;
+
+              dlg,btn-avg = <4>;
+              dlg,adc-1bit-rpt = <1>;
+          };
+      };
+    };