[11/27] ASoC: imx-es8328: Map missing jack kcontrols

Commit Message

Alper Nebi Yasak Aug. 2, 2023, 5:57 p.m. UTC

This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. It seems to have a
single detection GPIO pin used to report everything as a Headset. But it
has widgets for Headphone and Mic Jack, so expose both to userspace as
kcontrols.

Signed-off-by: Alper Nebi Yasak <[e-mail]>
---
Also see https://github.com/xobs/pulseaudio-novena though I don't
really understand PulseAudio configuration.

 sound/soc/fsl/imx-es8328.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

Patch

diff --git a/sound/soc/fsl/imx-es8328.c b/sound/soc/fsl/imx-es8328.c
index 85bd36fb68a2..6f0d031c1d5f 100644
--- a/sound/soc/fsl/imx-es8328.c
+++ b/sound/soc/fsl/imx-es8328.c
@@ -37,6 +37,16 @@  static struct snd_soc_jack_gpio headset_jack_gpios[] = {
 };
 
 static struct snd_soc_jack headset_jack;
+static struct snd_soc_jack_pin headset_jack_pins[] = {
+	{
+		.pin = "Headphone",
+		.mask = SND_JACK_HEADPHONE,
+	},
+	{
+		.pin = "Mic Jack",
+		.mask = SND_JACK_MICROPHONE,
+	},
+};
 
 static int imx_es8328_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
@@ -46,9 +56,11 @@  static int imx_es8328_dai_init(struct snd_soc_pcm_runtime *rtd)
 
 	/* Headphone jack detection */
 	if (gpio_is_valid(data->jack_gpio)) {
-		ret = snd_soc_card_jack_new(rtd->card, "Headphone",
-					    SND_JACK_HEADPHONE | SND_JACK_BTN_0,
-					    &headset_jack);
+		ret = snd_soc_card_jack_new_pins(rtd->card, "Headphone",
+						 SND_JACK_HEADSET | SND_JACK_BTN_0,
+						 &headset_jack,
+						 headset_jack_pins,
+						 ARRAY_SIZE(headset_jack_pins));
 		if (ret)
 			return ret;
 
@@ -68,6 +80,11 @@  static const struct snd_soc_dapm_widget imx_es8328_dapm_widgets[] = {
 	SND_SOC_DAPM_REGULATOR_SUPPLY("audio-amp", 1, 0),
 };
 
+static const struct snd_kcontrol_new imx_es8328_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Mic Jack"),
+};
+
 static int imx_es8328_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -183,6 +200,8 @@  static int imx_es8328_probe(struct platform_device *pdev)
 	data->card.dev = dev;
 	data->card.dapm_widgets = imx_es8328_dapm_widgets;
 	data->card.num_dapm_widgets = ARRAY_SIZE(imx_es8328_dapm_widgets);
+	data->card.controls = imx_es8328_controls;
+	data->card.num_controls = ARRAY_SIZE(imx_es8328_controls);
 	ret = snd_soc_of_parse_card_name(&data->card, "model");
 	if (ret) {
 		dev_err(dev, "Unable to parse card name\n");