| Message ID | 20230802175737.263412-5-alpernebiyasak@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 00c7ee820895c9563b7780f84f1b9420cbfbe6c7 |
| Headers | show |
| Series | ASoC: Map missing jack kcontrols | expand |
On 2023/08/03 2:57, Alper Nebi Yasak wrote: > This driver does not properly map jack pins to kcontrols that PulseAudio > and PipeWire need to handle jack detection events. The RT5682, RT1015 > and RT1015p codecs used here can detect Headphone and Headset Mic > connections. Expose the former two to userspace as kcontrols. > > Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> > --- > Should the SND_JACK_LINEOUT be removed from the jack_new_pins calls? I had patches to remove SND_JACK_LINEOUT and to add separate kcontrols, but I forgot them. Mark Brown has a raised question if the jack is really not driven as a line output[1], but I never answered him (sorry for that!) I don't know if the hardware is capable, but I think we better to remove it for now since the codec driver does not handle it. Mark, does it sound reasonable? Regards, Akihiko Odaki [1] https://www.spinics.net/lists/alsa-devel/msg147970.html > > sound/soc/amd/acp3x-rt5682-max9836.c | 23 ++++++++++++++++++----- > 1 file changed, 18 insertions(+), 5 deletions(-) > > diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c > index 0543dda75b99..3bf7e1e83c36 100644 > --- a/sound/soc/amd/acp3x-rt5682-max9836.c > +++ b/sound/soc/amd/acp3x-rt5682-max9836.c > @@ -28,6 +28,17 @@ > #define DUAL_CHANNEL 2 > > static struct snd_soc_jack pco_jack; > +static struct snd_soc_jack_pin pco_jack_pins[] = { > + { > + .pin = "Headphone Jack", > + .mask = SND_JACK_HEADPHONE, > + }, > + { > + .pin = "Headset Mic", > + .mask = SND_JACK_MICROPHONE, > + }, > +}; > + > static struct clk *rt5682_dai_wclk; > static struct clk *rt5682_dai_bclk; > static struct gpio_desc *dmic_sel; > @@ -86,11 +97,13 @@ static int acp3x_5682_init(struct snd_soc_pcm_runtime *rtd) > rt5682_dai_wclk = clk_get(component->dev, "rt5682-dai-wclk"); > rt5682_dai_bclk = clk_get(component->dev, "rt5682-dai-bclk"); > > - ret = snd_soc_card_jack_new(card, "Headset Jack", > - SND_JACK_HEADSET | SND_JACK_LINEOUT | > - SND_JACK_BTN_0 | SND_JACK_BTN_1 | > - SND_JACK_BTN_2 | SND_JACK_BTN_3, > - &pco_jack); > + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", > + SND_JACK_HEADSET | SND_JACK_LINEOUT | > + SND_JACK_BTN_0 | SND_JACK_BTN_1 | > + SND_JACK_BTN_2 | SND_JACK_BTN_3, > + &pco_jack, > + pco_jack_pins, > + ARRAY_SIZE(pco_jack_pins)); > if (ret) { > dev_err(card->dev, "HP jack creation failed %d\n", ret); > return ret;
On Fri, Aug 04, 2023 at 05:04:52PM +0900, Akihiko Odaki wrote: > Mark Brown has a raised question if the jack is really not driven as a line > output[1], but I never answered him (sorry for that!) I don't know if the > hardware is capable, but I think we better to remove it for now since the > codec driver does not handle it. > Mark, does it sound reasonable? Sure.
On 2023/08/04 22:11, Mark Brown wrote: > On Fri, Aug 04, 2023 at 05:04:52PM +0900, Akihiko Odaki wrote: > >> Mark Brown has a raised question if the jack is really not driven as a line >> output[1], but I never answered him (sorry for that!) I don't know if the >> hardware is capable, but I think we better to remove it for now since the >> codec driver does not handle it. > >> Mark, does it sound reasonable? > > Sure. I see. Alper, can you add a patch to remove SND_JACK_LINEOUT to your series? Regards, Akihiko Odaki
On Fri, Aug 04, 2023 at 10:19:43PM +0900, Akihiko Odaki wrote:
> I see. Alper, can you add a patch to remove SND_JACK_LINEOUT to your series?
Please send an incremental patch on top of the series rather than
resending the full thing given how big the series is.
On 2023/08/03 2:57, Alper Nebi Yasak wrote: > This driver does not properly map jack pins to kcontrols that PulseAudio > and PipeWire need to handle jack detection events. The RT5682, RT1015 > and RT1015p codecs used here can detect Headphone and Headset Mic > connections. Expose the former two to userspace as kcontrols. > > Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
On 2023/08/08 16:47, Akihiko Odaki wrote: > On 2023/08/03 2:57, Alper Nebi Yasak wrote: >> This driver does not properly map jack pins to kcontrols that PulseAudio >> and PipeWire need to handle jack detection events. The RT5682, RT1015 >> and RT1015p codecs used here can detect Headphone and Headset Mic >> connections. Expose the former two to userspace as kcontrols. >> >> Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> > > Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c index 0543dda75b99..3bf7e1e83c36 100644 --- a/sound/soc/amd/acp3x-rt5682-max9836.c +++ b/sound/soc/amd/acp3x-rt5682-max9836.c @@ -28,6 +28,17 @@ #define DUAL_CHANNEL 2 static struct snd_soc_jack pco_jack; +static struct snd_soc_jack_pin pco_jack_pins[] = { + { + .pin = "Headphone Jack", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + static struct clk *rt5682_dai_wclk; static struct clk *rt5682_dai_bclk; static struct gpio_desc *dmic_sel; @@ -86,11 +97,13 @@ static int acp3x_5682_init(struct snd_soc_pcm_runtime *rtd) rt5682_dai_wclk = clk_get(component->dev, "rt5682-dai-wclk"); rt5682_dai_bclk = clk_get(component->dev, "rt5682-dai-bclk"); - ret = snd_soc_card_jack_new(card, "Headset Jack", - SND_JACK_HEADSET | SND_JACK_LINEOUT | - SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3, - &pco_jack); + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", + SND_JACK_HEADSET | SND_JACK_LINEOUT | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3, + &pco_jack, + pco_jack_pins, + ARRAY_SIZE(pco_jack_pins)); if (ret) { dev_err(card->dev, "HP jack creation failed %d\n", ret); return ret;
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5682, RT1015 and RT1015p codecs used here can detect Headphone and Headset Mic connections. Expose the former two to userspace as kcontrols. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> --- Should the SND_JACK_LINEOUT be removed from the jack_new_pins calls? sound/soc/amd/acp3x-rt5682-max9836.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-)