diff mbox series

[v5,10/32] ASoC: qcom: Add USB backend ASoC driver for Q6

Message ID 20230829210657.9904-11-quic_wcheng@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Introduce QC USB SND audio offloading support | expand

Commit Message

Wesley Cheng Aug. 29, 2023, 9:06 p.m. UTC
Create a USB BE component that will register a new USB port to the ASoC USB
framework.  This will handle determination on if the requested audio
profile is supported by the USB device currently selected.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 include/sound/q6usboffload.h  |  20 ++++
 sound/soc/qcom/Kconfig        |   4 +
 sound/soc/qcom/qdsp6/Makefile |   1 +
 sound/soc/qcom/qdsp6/q6usb.c  | 200 ++++++++++++++++++++++++++++++++++
 4 files changed, 225 insertions(+)
 create mode 100644 include/sound/q6usboffload.h
 create mode 100644 sound/soc/qcom/qdsp6/q6usb.c

Comments

Amadeusz Sławiński Aug. 30, 2023, 12:50 p.m. UTC | #1
On 8/29/2023 11:06 PM, Wesley Cheng wrote:
> Create a USB BE component that will register a new USB port to the ASoC USB
> framework.  This will handle determination on if the requested audio
> profile is supported by the USB device currently selected.
> 
> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> ---
>   include/sound/q6usboffload.h  |  20 ++++
>   sound/soc/qcom/Kconfig        |   4 +
>   sound/soc/qcom/qdsp6/Makefile |   1 +
>   sound/soc/qcom/qdsp6/q6usb.c  | 200 ++++++++++++++++++++++++++++++++++
>   4 files changed, 225 insertions(+)
>   create mode 100644 include/sound/q6usboffload.h
>   create mode 100644 sound/soc/qcom/qdsp6/q6usb.c
> 
> diff --git a/include/sound/q6usboffload.h b/include/sound/q6usboffload.h
> new file mode 100644
> index 000000000000..4fb1912d9f55
> --- /dev/null
> +++ b/include/sound/q6usboffload.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: GPL-2.0
> + *
> + * linux/sound/q6usboffload.h -- QDSP6 USB offload
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/**
> + * struct q6usb_offload
> + * @dev - dev handle to usb be
> + * @sid - streamID for iommu
> + * @intr_num - usb interrupter number
> + * @domain - allocated iommu domain
> + **/
> +struct q6usb_offload {
> +	struct device *dev;
> +	long long sid;
> +	u32 intr_num;
> +	struct iommu_domain *domain;
> +};
> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
> index e7b00d1d9e99..bb285af6bb04 100644
> --- a/sound/soc/qcom/Kconfig
> +++ b/sound/soc/qcom/Kconfig
> @@ -114,6 +114,9 @@ config SND_SOC_QDSP6_APM
>   config SND_SOC_QDSP6_PRM_LPASS_CLOCKS
>   	tristate
>   
> +config SND_SOC_QDSP6_USB
> +	tristate
> +
>   config SND_SOC_QDSP6_PRM
>   	tristate
>   	select SND_SOC_QDSP6_PRM_LPASS_CLOCKS
> @@ -134,6 +137,7 @@ config SND_SOC_QDSP6
>   	select SND_SOC_TOPOLOGY
>   	select SND_SOC_QDSP6_APM
>   	select SND_SOC_QDSP6_PRM
> +	select SND_SOC_QDSP6_USB
>   	help
>   	 To add support for MSM QDSP6 Soc Audio.
>   	 This will enable sound soc platform specific
> diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
> index 3963bf234664..c9457ee898d0 100644
> --- a/sound/soc/qcom/qdsp6/Makefile
> +++ b/sound/soc/qcom/qdsp6/Makefile
> @@ -17,3 +17,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o
>   obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o
>   obj-$(CONFIG_SND_SOC_QDSP6_PRM) += q6prm.o
>   obj-$(CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS) += q6prm-clocks.o
> +obj-$(CONFIG_SND_SOC_QDSP6_USB) += q6usb.o
> diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
> new file mode 100644
> index 000000000000..88aa0a64201a
> --- /dev/null
> +++ b/sound/soc/qcom/qdsp6/q6usb.c
> @@ -0,0 +1,200 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/iommu.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dma-map-ops.h>
> +
> +#include <sound/pcm.h>
> +#include <sound/soc.h>
> +#include <sound/soc-usb.h>
> +#include <sound/pcm_params.h>
> +#include <sound/asound.h>
> +#include <sound/q6usboffload.h>
> +
> +#include "q6dsp-lpass-ports.h"
> +#include "q6afe.h"
> +
> +#define SID_MASK	0xF
> +
> +struct q6usb_port_data {
> +	struct q6afe_usb_cfg usb_cfg;
> +	struct snd_soc_usb *usb;
> +	struct q6usb_offload priv;
> +	int active_idx;
> +};
> +
> +static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = {
> +	SND_SOC_DAPM_HP("USB_RX_BE", NULL),
> +};
> +
> +static const struct snd_soc_dapm_route q6usb_dapm_routes[] = {
> +	{"USB Playback", NULL, "USB_RX_BE"},
> +};
> +
> +static int q6usb_hw_params(struct snd_pcm_substream *substream,
> +			   struct snd_pcm_hw_params *params,
> +			   struct snd_soc_dai *dai)
> +{
> +	return 0;
> +}

Missing new line after closing bracket between function and following 
struct.

> +static const struct snd_soc_dai_ops q6usb_ops = {
> +	.hw_params = q6usb_hw_params,
> +};
> +
> +static struct snd_soc_dai_driver q6usb_be_dais[] = {
> +	{
> +		.playback = {
> +			.stream_name = "USB BE RX",
> +			.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
> +				SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
> +				SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
> +				SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
> +				SNDRV_PCM_RATE_192000,
> +			.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
> +				SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |
> +				SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |
> +				SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
> +			.channels_min = 1,
> +			.channels_max = 2,
> +			.rate_max =     192000,
> +			.rate_min =	8000,
> +		},
> +		.id = USB_RX,
> +		.name = "USB_RX_BE",
> +		.ops = &q6usb_ops,
> +	},
> +};
> +
> +static int q6usb_audio_ports_of_xlate_dai_name(struct snd_soc_component *component,
> +					const struct of_phandle_args *args,
> +					const char **dai_name)
> +{
> +	int id = args->args[0];
> +	int ret = -EINVAL;
> +	int i;
> +
> +	for (i = 0; i  < ARRAY_SIZE(q6usb_be_dais); i++) {

Double space after second i.

> +		if (q6usb_be_dais[i].id == id) {
> +			*dai_name = q6usb_be_dais[i].name;
> +			ret = 0;
> +			break;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
> +			struct snd_soc_usb_device *sdev, bool connected)
> +{
> +	struct q6usb_port_data *data;
> +
> +	if (!usb->component)
> +		return -ENODEV;
> +
> +	data = dev_get_drvdata(usb->component->dev);
> +
> +	if (connected)
> +		/* We only track the latest USB headset plugged in */
> +		data->active_idx = sdev->card_idx;

Maybe add brackets around both comment and code? Not sure what guidance 
there is in such cases, but above code looks weird to me.

> +
> +	return 0;
> +}
> +
> +static int q6usb_component_probe(struct snd_soc_component *component)
> +{
> +	struct q6usb_port_data *data = dev_get_drvdata(component->dev);
> +
> +	data->usb = snd_soc_usb_add_port(component->dev, &data->priv, q6usb_alsa_connection_cb);
> +	if (IS_ERR(data->usb)) {
> +		dev_err(component->dev, "failed to add usb port\n");
> +		return -ENODEV;
> +	}
> +
> +	data->usb->component = component;
> +
> +	return 0;
> +}
> +
> +static void q6usb_component_remove(struct snd_soc_component *component)
> +{
> +	snd_soc_usb_remove_port(component->dev);
> +}
> +
> +static const struct snd_soc_component_driver q6usb_dai_component = {
> +	.probe = q6usb_component_probe,
> +	.remove = q6usb_component_remove,
> +	.name = "q6usb-dai-component",
> +	.dapm_widgets = q6usb_dai_widgets,
> +	.num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets),
> +	.dapm_routes = q6usb_dapm_routes,
> +	.num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes),
> +	.of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name,
> +};
> +
> +static int q6usb_dai_dev_probe(struct platform_device *pdev)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	struct q6usb_port_data *data;
> +	struct device *dev = &pdev->dev;
> +	struct of_phandle_args args;
> +	int ret;
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	ret = of_property_read_u32(node, "qcom,usb-audio-intr-num",
> +				&data->priv.intr_num);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to read intr num.\n");
> +		return ret;
> +	}
> +
> +	ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args);
> +	if (ret < 0)
> +		data->priv.sid = -1;
> +	else
> +		data->priv.sid = args.args[0] & SID_MASK;
> +
> +	data->priv.domain = iommu_get_domain_for_dev(&pdev->dev);
> +
> +	data->priv.dev = dev;
> +	dev_set_drvdata(dev, data);
> +
> +	return devm_snd_soc_register_component(dev, &q6usb_dai_component,
> +					q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais));
> +}
> +
> +static int q6usb_dai_dev_remove(struct platform_device *pdev)
> +{
> +	return 0;
> +}

Does platform driver really need empty remove function? Remove it.

> +
> +static const struct of_device_id q6usb_dai_device_id[] = {
> +	{ .compatible = "qcom,q6usb" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, q6usb_dai_device_id);
> +
> +static struct platform_driver q6usb_dai_platform_driver = {
> +	.driver = {
> +		.name = "q6usb-dai",
> +		.of_match_table = of_match_ptr(q6usb_dai_device_id),
> +	},
> +	.probe = q6usb_dai_dev_probe,
> +	.remove = q6usb_dai_dev_remove,
> +};
> +module_platform_driver(q6usb_dai_platform_driver);
> +
> +MODULE_DESCRIPTION("Q6 USB backend dai driver");
> +MODULE_LICENSE("GPL");
Wesley Cheng Aug. 31, 2023, 7:34 p.m. UTC | #2
Hi,

On 8/30/2023 5:50 AM, Amadeusz Sławiński wrote:
> On 8/29/2023 11:06 PM, Wesley Cheng wrote:
>> Create a USB BE component that will register a new USB port to the 
>> ASoC USB
>> framework.  This will handle determination on if the requested audio
>> profile is supported by the USB device currently selected.
>>
>> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
>> ---
>>   include/sound/q6usboffload.h  |  20 ++++
>>   sound/soc/qcom/Kconfig        |   4 +
>>   sound/soc/qcom/qdsp6/Makefile |   1 +
>>   sound/soc/qcom/qdsp6/q6usb.c  | 200 ++++++++++++++++++++++++++++++++++
>>   4 files changed, 225 insertions(+)
>>   create mode 100644 include/sound/q6usboffload.h
>>   create mode 100644 sound/soc/qcom/qdsp6/q6usb.c
>>
>> diff --git a/include/sound/q6usboffload.h b/include/sound/q6usboffload.h
>> new file mode 100644
>> index 000000000000..4fb1912d9f55
>> --- /dev/null
>> +++ b/include/sound/q6usboffload.h
>> @@ -0,0 +1,20 @@
>> +/* SPDX-License-Identifier: GPL-2.0
>> + *
>> + * linux/sound/q6usboffload.h -- QDSP6 USB offload
>> + *
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All 
>> rights reserved.
>> + */
>> +
>> +/**
>> + * struct q6usb_offload
>> + * @dev - dev handle to usb be
>> + * @sid - streamID for iommu
>> + * @intr_num - usb interrupter number
>> + * @domain - allocated iommu domain
>> + **/
>> +struct q6usb_offload {
>> +    struct device *dev;
>> +    long long sid;
>> +    u32 intr_num;
>> +    struct iommu_domain *domain;
>> +};
>> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
>> index e7b00d1d9e99..bb285af6bb04 100644
>> --- a/sound/soc/qcom/Kconfig
>> +++ b/sound/soc/qcom/Kconfig
>> @@ -114,6 +114,9 @@ config SND_SOC_QDSP6_APM
>>   config SND_SOC_QDSP6_PRM_LPASS_CLOCKS
>>       tristate
>> +config SND_SOC_QDSP6_USB
>> +    tristate
>> +
>>   config SND_SOC_QDSP6_PRM
>>       tristate
>>       select SND_SOC_QDSP6_PRM_LPASS_CLOCKS
>> @@ -134,6 +137,7 @@ config SND_SOC_QDSP6
>>       select SND_SOC_TOPOLOGY
>>       select SND_SOC_QDSP6_APM
>>       select SND_SOC_QDSP6_PRM
>> +    select SND_SOC_QDSP6_USB
>>       help
>>        To add support for MSM QDSP6 Soc Audio.
>>        This will enable sound soc platform specific
>> diff --git a/sound/soc/qcom/qdsp6/Makefile 
>> b/sound/soc/qcom/qdsp6/Makefile
>> index 3963bf234664..c9457ee898d0 100644
>> --- a/sound/soc/qcom/qdsp6/Makefile
>> +++ b/sound/soc/qcom/qdsp6/Makefile
>> @@ -17,3 +17,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o
>>   obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o
>>   obj-$(CONFIG_SND_SOC_QDSP6_PRM) += q6prm.o
>>   obj-$(CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS) += q6prm-clocks.o
>> +obj-$(CONFIG_SND_SOC_QDSP6_USB) += q6usb.o
>> diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
>> new file mode 100644
>> index 000000000000..88aa0a64201a
>> --- /dev/null
>> +++ b/sound/soc/qcom/qdsp6/q6usb.c
>> @@ -0,0 +1,200 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All 
>> rights reserved.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/iommu.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/dma-map-ops.h>
>> +
>> +#include <sound/pcm.h>
>> +#include <sound/soc.h>
>> +#include <sound/soc-usb.h>
>> +#include <sound/pcm_params.h>
>> +#include <sound/asound.h>
>> +#include <sound/q6usboffload.h>
>> +
>> +#include "q6dsp-lpass-ports.h"
>> +#include "q6afe.h"
>> +
>> +#define SID_MASK    0xF
>> +
>> +struct q6usb_port_data {
>> +    struct q6afe_usb_cfg usb_cfg;
>> +    struct snd_soc_usb *usb;
>> +    struct q6usb_offload priv;
>> +    int active_idx;
>> +};
>> +
>> +static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = {
>> +    SND_SOC_DAPM_HP("USB_RX_BE", NULL),
>> +};
>> +
>> +static const struct snd_soc_dapm_route q6usb_dapm_routes[] = {
>> +    {"USB Playback", NULL, "USB_RX_BE"},
>> +};
>> +
>> +static int q6usb_hw_params(struct snd_pcm_substream *substream,
>> +               struct snd_pcm_hw_params *params,
>> +               struct snd_soc_dai *dai)
>> +{
>> +    return 0;
>> +}
> 
> Missing new line after closing bracket between function and following 
> struct.
> 

Thanks for the review, will fix this.

>> +static const struct snd_soc_dai_ops q6usb_ops = {
>> +    .hw_params = q6usb_hw_params,
>> +};
>> +
>> +static struct snd_soc_dai_driver q6usb_be_dais[] = {
>> +    {
>> +        .playback = {
>> +            .stream_name = "USB BE RX",
>> +            .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
>> +                SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
>> +                SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
>> +                SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
>> +                SNDRV_PCM_RATE_192000,
>> +            .formats = SNDRV_PCM_FMTBIT_S16_LE | 
>> SNDRV_PCM_FMTBIT_S16_BE |
>> +                SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |
>> +                SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |
>> +                SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
>> +            .channels_min = 1,
>> +            .channels_max = 2,
>> +            .rate_max =     192000,
>> +            .rate_min =    8000,
>> +        },
>> +        .id = USB_RX,
>> +        .name = "USB_RX_BE",
>> +        .ops = &q6usb_ops,
>> +    },
>> +};
>> +
>> +static int q6usb_audio_ports_of_xlate_dai_name(struct 
>> snd_soc_component *component,
>> +                    const struct of_phandle_args *args,
>> +                    const char **dai_name)
>> +{
>> +    int id = args->args[0];
>> +    int ret = -EINVAL;
>> +    int i;
>> +
>> +    for (i = 0; i  < ARRAY_SIZE(q6usb_be_dais); i++) {
> 
> Double space after second i.
> 

Will change.

>> +        if (q6usb_be_dais[i].id == id) {
>> +            *dai_name = q6usb_be_dais[i].name;
>> +            ret = 0;
>> +            break;
>> +        }
>> +    }
>> +
>> +    return ret;
>> +}
>> +
>> +static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
>> +            struct snd_soc_usb_device *sdev, bool connected)
>> +{
>> +    struct q6usb_port_data *data;
>> +
>> +    if (!usb->component)
>> +        return -ENODEV;
>> +
>> +    data = dev_get_drvdata(usb->component->dev);
>> +
>> +    if (connected)
>> +        /* We only track the latest USB headset plugged in */
>> +        data->active_idx = sdev->card_idx;
> 
> Maybe add brackets around both comment and code? Not sure what guidance 
> there is in such cases, but above code looks weird to me.
> 

Sure.

>> +
>> +    return 0;
>> +}
>> +
>> +static int q6usb_component_probe(struct snd_soc_component *component)
>> +{
>> +    struct q6usb_port_data *data = dev_get_drvdata(component->dev);
>> +
>> +    data->usb = snd_soc_usb_add_port(component->dev, &data->priv, 
>> q6usb_alsa_connection_cb);
>> +    if (IS_ERR(data->usb)) {
>> +        dev_err(component->dev, "failed to add usb port\n");
>> +        return -ENODEV;
>> +    }
>> +
>> +    data->usb->component = component;
>> +
>> +    return 0;
>> +}
>> +
>> +static void q6usb_component_remove(struct snd_soc_component *component)
>> +{
>> +    snd_soc_usb_remove_port(component->dev);
>> +}
>> +
>> +static const struct snd_soc_component_driver q6usb_dai_component = {
>> +    .probe = q6usb_component_probe,
>> +    .remove = q6usb_component_remove,
>> +    .name = "q6usb-dai-component",
>> +    .dapm_widgets = q6usb_dai_widgets,
>> +    .num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets),
>> +    .dapm_routes = q6usb_dapm_routes,
>> +    .num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes),
>> +    .of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name,
>> +};
>> +
>> +static int q6usb_dai_dev_probe(struct platform_device *pdev)
>> +{
>> +    struct device_node *node = pdev->dev.of_node;
>> +    struct q6usb_port_data *data;
>> +    struct device *dev = &pdev->dev;
>> +    struct of_phandle_args args;
>> +    int ret;
>> +
>> +    data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> +    if (!data)
>> +        return -ENOMEM;
>> +
>> +    ret = of_property_read_u32(node, "qcom,usb-audio-intr-num",
>> +                &data->priv.intr_num);
>> +    if (ret) {
>> +        dev_err(&pdev->dev, "failed to read intr num.\n");
>> +        return ret;
>> +    }
>> +
>> +    ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args);
>> +    if (ret < 0)
>> +        data->priv.sid = -1;
>> +    else
>> +        data->priv.sid = args.args[0] & SID_MASK;
>> +
>> +    data->priv.domain = iommu_get_domain_for_dev(&pdev->dev);
>> +
>> +    data->priv.dev = dev;
>> +    dev_set_drvdata(dev, data);
>> +
>> +    return devm_snd_soc_register_component(dev, &q6usb_dai_component,
>> +                    q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais));
>> +}
>> +
>> +static int q6usb_dai_dev_remove(struct platform_device *pdev)
>> +{
>> +    return 0;
>> +}
> 
> Does platform driver really need empty remove function? Remove it.
> 

Wasn't too sure about this either, so I included it to be consistent. 
Will remove this and add a small comment on why it isn't required..

Thanks
Wesley Cheng
diff mbox series

Patch

diff --git a/include/sound/q6usboffload.h b/include/sound/q6usboffload.h
new file mode 100644
index 000000000000..4fb1912d9f55
--- /dev/null
+++ b/include/sound/q6usboffload.h
@@ -0,0 +1,20 @@ 
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * linux/sound/q6usboffload.h -- QDSP6 USB offload
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/**
+ * struct q6usb_offload
+ * @dev - dev handle to usb be
+ * @sid - streamID for iommu
+ * @intr_num - usb interrupter number
+ * @domain - allocated iommu domain
+ **/
+struct q6usb_offload {
+	struct device *dev;
+	long long sid;
+	u32 intr_num;
+	struct iommu_domain *domain;
+};
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index e7b00d1d9e99..bb285af6bb04 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -114,6 +114,9 @@  config SND_SOC_QDSP6_APM
 config SND_SOC_QDSP6_PRM_LPASS_CLOCKS
 	tristate
 
+config SND_SOC_QDSP6_USB
+	tristate
+
 config SND_SOC_QDSP6_PRM
 	tristate
 	select SND_SOC_QDSP6_PRM_LPASS_CLOCKS
@@ -134,6 +137,7 @@  config SND_SOC_QDSP6
 	select SND_SOC_TOPOLOGY
 	select SND_SOC_QDSP6_APM
 	select SND_SOC_QDSP6_PRM
+	select SND_SOC_QDSP6_USB
 	help
 	 To add support for MSM QDSP6 Soc Audio.
 	 This will enable sound soc platform specific
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
index 3963bf234664..c9457ee898d0 100644
--- a/sound/soc/qcom/qdsp6/Makefile
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -17,3 +17,4 @@  obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o
 obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o
 obj-$(CONFIG_SND_SOC_QDSP6_PRM) += q6prm.o
 obj-$(CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS) += q6prm-clocks.o
+obj-$(CONFIG_SND_SOC_QDSP6_USB) += q6usb.o
diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
new file mode 100644
index 000000000000..88aa0a64201a
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6usb.c
@@ -0,0 +1,200 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/iommu.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-map-ops.h>
+
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-usb.h>
+#include <sound/pcm_params.h>
+#include <sound/asound.h>
+#include <sound/q6usboffload.h>
+
+#include "q6dsp-lpass-ports.h"
+#include "q6afe.h"
+
+#define SID_MASK	0xF
+
+struct q6usb_port_data {
+	struct q6afe_usb_cfg usb_cfg;
+	struct snd_soc_usb *usb;
+	struct q6usb_offload priv;
+	int active_idx;
+};
+
+static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = {
+	SND_SOC_DAPM_HP("USB_RX_BE", NULL),
+};
+
+static const struct snd_soc_dapm_route q6usb_dapm_routes[] = {
+	{"USB Playback", NULL, "USB_RX_BE"},
+};
+
+static int q6usb_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params,
+			   struct snd_soc_dai *dai)
+{
+	return 0;
+}
+static const struct snd_soc_dai_ops q6usb_ops = {
+	.hw_params = q6usb_hw_params,
+};
+
+static struct snd_soc_dai_driver q6usb_be_dais[] = {
+	{
+		.playback = {
+			.stream_name = "USB BE RX",
+			.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
+				SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
+				SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
+				SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
+				SNDRV_PCM_RATE_192000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
+				SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |
+				SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |
+				SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
+			.channels_min = 1,
+			.channels_max = 2,
+			.rate_max =     192000,
+			.rate_min =	8000,
+		},
+		.id = USB_RX,
+		.name = "USB_RX_BE",
+		.ops = &q6usb_ops,
+	},
+};
+
+static int q6usb_audio_ports_of_xlate_dai_name(struct snd_soc_component *component,
+					const struct of_phandle_args *args,
+					const char **dai_name)
+{
+	int id = args->args[0];
+	int ret = -EINVAL;
+	int i;
+
+	for (i = 0; i  < ARRAY_SIZE(q6usb_be_dais); i++) {
+		if (q6usb_be_dais[i].id == id) {
+			*dai_name = q6usb_be_dais[i].name;
+			ret = 0;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
+			struct snd_soc_usb_device *sdev, bool connected)
+{
+	struct q6usb_port_data *data;
+
+	if (!usb->component)
+		return -ENODEV;
+
+	data = dev_get_drvdata(usb->component->dev);
+
+	if (connected)
+		/* We only track the latest USB headset plugged in */
+		data->active_idx = sdev->card_idx;
+
+	return 0;
+}
+
+static int q6usb_component_probe(struct snd_soc_component *component)
+{
+	struct q6usb_port_data *data = dev_get_drvdata(component->dev);
+
+	data->usb = snd_soc_usb_add_port(component->dev, &data->priv, q6usb_alsa_connection_cb);
+	if (IS_ERR(data->usb)) {
+		dev_err(component->dev, "failed to add usb port\n");
+		return -ENODEV;
+	}
+
+	data->usb->component = component;
+
+	return 0;
+}
+
+static void q6usb_component_remove(struct snd_soc_component *component)
+{
+	snd_soc_usb_remove_port(component->dev);
+}
+
+static const struct snd_soc_component_driver q6usb_dai_component = {
+	.probe = q6usb_component_probe,
+	.remove = q6usb_component_remove,
+	.name = "q6usb-dai-component",
+	.dapm_widgets = q6usb_dai_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets),
+	.dapm_routes = q6usb_dapm_routes,
+	.num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes),
+	.of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name,
+};
+
+static int q6usb_dai_dev_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct q6usb_port_data *data;
+	struct device *dev = &pdev->dev;
+	struct of_phandle_args args;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	ret = of_property_read_u32(node, "qcom,usb-audio-intr-num",
+				&data->priv.intr_num);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to read intr num.\n");
+		return ret;
+	}
+
+	ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args);
+	if (ret < 0)
+		data->priv.sid = -1;
+	else
+		data->priv.sid = args.args[0] & SID_MASK;
+
+	data->priv.domain = iommu_get_domain_for_dev(&pdev->dev);
+
+	data->priv.dev = dev;
+	dev_set_drvdata(dev, data);
+
+	return devm_snd_soc_register_component(dev, &q6usb_dai_component,
+					q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais));
+}
+
+static int q6usb_dai_dev_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static const struct of_device_id q6usb_dai_device_id[] = {
+	{ .compatible = "qcom,q6usb" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, q6usb_dai_device_id);
+
+static struct platform_driver q6usb_dai_platform_driver = {
+	.driver = {
+		.name = "q6usb-dai",
+		.of_match_table = of_match_ptr(q6usb_dai_device_id),
+	},
+	.probe = q6usb_dai_dev_probe,
+	.remove = q6usb_dai_dev_remove,
+};
+module_platform_driver(q6usb_dai_platform_driver);
+
+MODULE_DESCRIPTION("Q6 USB backend dai driver");
+MODULE_LICENSE("GPL");