diff mbox series

[PATCHv2,10/10] Documentation: fsl-asoc-card: add documentation for generic codec case

Message ID 20231027144734.3654829-11-elinor.montmasson@savoirfairelinux.com (mailing list archive)
State New, archived
Headers show
Series ASoC: fsl-asoc-card: compatibility integration of a generic codec use case for use with S/PDIF controller | expand

Commit Message

Elinor Montmasson Oct. 27, 2023, 2:47 p.m. UTC 
Add documentation about new dts bindings following new support
for compatible "fsl,imx-audio-generic".

Some CPU DAI don't require a real audio codec. The new compatible
"fsl,imx-audio-generic" allows to use the driver with codec drivers
SPDIF DIT and SPDIF DIR as dummy codecs.
It also allows to use not pre-configured audio codecs which
don't require specific control through a codec driver.

The new dts properties give the possibility to set some parameters
about the CPU DAI usually set through the codec configuration.

Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Co-authored-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
---
 .../bindings/sound/fsl-asoc-card.txt          | 26 ++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index 4e8dbc5abfd1..274319bf7ff7 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -17,6 +17,9 @@  Note: The card is initially designed for those sound cards who use AC'97, I2S
       and PCM DAI formats. However, it'll be also possible to support those non
       AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as
       long as the driver has been properly upgraded.
+      To use CPU DAIs that do not require a codec such as an S/PDIF controller,
+      or to use a DAI to output or capture raw I2S/TDM data, you can
+      use the compatible "fsl,imx-audio-generic".
 
 
 The compatible list for this generic sound card currently:
@@ -48,6 +51,8 @@  The compatible list for this generic sound card currently:
 
  "fsl,imx-audio-nau8822"
 
+ "fsl,imx-audio-generic"
+
 Required properties:
 
   - compatible		: Contains one of entries in the compatible list.
@@ -56,7 +61,11 @@  Required properties:
 
   - audio-cpu		: The phandle of an CPU DAI controller
 
-  - audio-codec		: The phandle of an audio codec
+  - audio-codec		: The phandle of an audio codec.
+			  If using the "fsl,imx-audio-generic" compatible,
+			  give instead a pair of phandles with the
+			  spdif_transmitter first (driver SPDIF DIT) and the
+			  spdif_receiver second (driver SPDIF DIR).
 
 Optional properties:
 
@@ -88,6 +97,21 @@  Optional properties:
   - bitclock-inversion	: dai-link uses bit clock inversion, for details see simple-card.yaml.
   - mclk-id		: main clock id, specific for each card configuration.
 
+Optional, relevant only with the "fsl,imx-audio-generic" compatible:
+
+  - cpu-slot-width	: Indicates a specific TDM slot width in bits.
+  - cpu-slot-num	: Indicates a specific number of TDM slots per frame.
+
+  - cpu-sysclk-freq-rx	: Frequency of the CPU DAI sys clock for Rx.
+  - cpu-sysclk-freq-tx	: Frequency of the CPU DAI sys clock for Tx.
+
+  - cpu-sysclk-dir-rx-out	: Boolean property. Specifies sys clock direction
+				  as 'out' on initialization for Rx.
+				  If not set, default direction is 'in'.
+  - cpu-sysclk-dir-tx-out	: Boolean property. Specifies sys clock direction
+				  as 'out' on initialization for Tx.
+				  If not set, default direction is 'in'.
+
 Optional unless SSI is selected as a CPU DAI:
 
   - mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX)