| Message ID | 20231218124058.2047167-11-elinor.montmasson@savoirfairelinux.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ASoC: fsl-asoc-card: compatibility integration of a generic codec use case for use with S/PDIF controller | expand |
On Mon, Dec 18, 2023 at 01:40:58PM +0100, Elinor Montmasson wrote: > Add documentation about new dts bindings following new support > for compatible "fsl,imx-audio-generic". > > Some CPU DAI don't require a real audio codec. The new compatible > "fsl,imx-audio-generic" allows using the driver with codec drivers > SPDIF DIT and SPDIF DIR as dummy codecs. > It also allows using not pre-configured audio codecs which > don't require specific control through a codec driver. > > The new dts properties give the possibility to set some parameters > about the CPU DAI usually set through the codec configuration. > > Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com> > Co-authored-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com> > --- > .../bindings/sound/fsl-asoc-card.txt | 28 ++++++++++++++++++- > 1 file changed, 27 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt > index 4e8dbc5abfd1..f137ef2154e3 100644 > --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt > +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt > @@ -17,6 +17,9 @@ Note: The card is initially designed for those sound cards who use AC'97, I2S > and PCM DAI formats. However, it'll be also possible to support those non > AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as > long as the driver has been properly upgraded. > + To use CPU DAIs that do not require a codec such as an S/PDIF controller, > + or to use a DAI to output or capture raw I2S/TDM data, you can > + use the compatible "fsl,imx-audio-generic". > > > The compatible list for this generic sound card currently: > @@ -48,6 +51,8 @@ The compatible list for this generic sound card currently: > > "fsl,imx-audio-nau8822" > > + "fsl,imx-audio-generic" > + > Required properties: > > - compatible : Contains one of entries in the compatible list. > @@ -56,7 +61,11 @@ Required properties: > > - audio-cpu : The phandle of an CPU DAI controller > > - - audio-codec : The phandle of an audio codec > + - audio-codec : The phandle of an audio codec. > + If using the "fsl,imx-audio-generic" compatible, > + give instead a pair of phandles with the > + spdif_transmitter first (driver SPDIF DIT) and the > + spdif_receiver second (driver SPDIF DIR). > > Optional properties: > > @@ -87,6 +96,23 @@ Optional properties: > - frame-inversion : dai-link uses frame clock inversion, for details see simple-card.yaml. > - bitclock-inversion : dai-link uses bit clock inversion, for details see simple-card.yaml. > - mclk-id : main clock id, specific for each card configuration. > + For multi-codec configurations, an array of ids can be > + given, one for each codec. > + > +Optional, relevant only with the "fsl,imx-audio-generic" compatible: > + > + - cpu-slot-width : Indicates a specific TDM slot width in bits. > + - cpu-slot-num : Indicates a specific number of TDM slots per frame. Pretty sure I've seen other bindings with TDM slot properties. A sign we need something common if we don't already have something. > + > + - cpu-sysclk-freq-rx : Frequency of the CPU DAI sys clock for Rx. > + - cpu-sysclk-freq-tx : Frequency of the CPU DAI sys clock for Tx. > + > + - cpu-sysclk-dir-rx-out : Boolean property. Specifies sys clock direction > + as 'out' on initialization for Rx. > + If not set, default direction is 'in'. > + - cpu-sysclk-dir-tx-out : Boolean property. Specifies sys clock direction > + as 'out' on initialization for Tx. > + If not set, default direction is 'in'. Looks like clock stuff. Use the clock binding. Rob
Hello, On Wednesday, 20 December, 2023 23:25:50, Rob Herring wrote: > On Mon, Dec 18, 2023 at 01:40:58PM +0100, Elinor Montmasson wrote: > > +Optional, relevant only with the "fsl,imx-audio-generic" compatible: > > + > > + - cpu-slot-width : Indicates a specific TDM slot width in bits. > > + - cpu-slot-num : Indicates a specific number of TDM slots per frame. > > Pretty sure I've seen other bindings with TDM slot properties. A sign we > need something common if we don't already have something. That's right, "tdm-slot.txt" already defines TDM bindings, I will use them with the utility function snd_soc_of_parse_tdm_slot(). > > + - cpu-sysclk-freq-rx : Frequency of the CPU DAI sys clock for Rx. > > + - cpu-sysclk-freq-tx : Frequency of the CPU DAI sys clock for Tx. > > + > > + - cpu-sysclk-dir-rx-out : Boolean property. Specifies sys clock direction > > + as 'out' on initialization for Rx. > > + If not set, default direction is 'in'. > > + - cpu-sysclk-dir-tx-out : Boolean property. Specifies sys clock direction > > + as 'out' on initialization for Tx. > > + If not set, default direction is 'in'. > > Looks like clock stuff. Use the clock binding. simple-card defines similar properties at the dai level: "system-clock-frequency" and "system-clock-direction-out". The first is used if no "clocks" binding is specified for the dai node. Maybe I could use a similar logic with fsl-asoc-card ? * adding a "clock-cpu" phandle property which should be the cpu clock. It will be used to retreive the frequency for both RX and TX. * keeping "cpu-sysclk-freq-rx"/"cpu-sysclk-freq-tx", which are used if no clock is provided, like "system-clock-frequency" in simple-card. * keep using "cpu-sysclk-dir-rx-out"/"cpu-sysclk-dir-tx-out", like "system-clock-direction-out" in simple card. Also, maybe I could rename my new properties: cpu-system-clock-frequency-tx, cpu-system-clock-direction-out-rx, ... It would better match those in simple-card as they do the same thing. Best regards, Elinor Montmasson
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index 4e8dbc5abfd1..f137ef2154e3 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -17,6 +17,9 @@ Note: The card is initially designed for those sound cards who use AC'97, I2S and PCM DAI formats. However, it'll be also possible to support those non AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as long as the driver has been properly upgraded. + To use CPU DAIs that do not require a codec such as an S/PDIF controller, + or to use a DAI to output or capture raw I2S/TDM data, you can + use the compatible "fsl,imx-audio-generic". The compatible list for this generic sound card currently: @@ -48,6 +51,8 @@ The compatible list for this generic sound card currently: "fsl,imx-audio-nau8822" + "fsl,imx-audio-generic" + Required properties: - compatible : Contains one of entries in the compatible list. @@ -56,7 +61,11 @@ Required properties: - audio-cpu : The phandle of an CPU DAI controller - - audio-codec : The phandle of an audio codec + - audio-codec : The phandle of an audio codec. + If using the "fsl,imx-audio-generic" compatible, + give instead a pair of phandles with the + spdif_transmitter first (driver SPDIF DIT) and the + spdif_receiver second (driver SPDIF DIR). Optional properties: @@ -87,6 +96,23 @@ Optional properties: - frame-inversion : dai-link uses frame clock inversion, for details see simple-card.yaml. - bitclock-inversion : dai-link uses bit clock inversion, for details see simple-card.yaml. - mclk-id : main clock id, specific for each card configuration. + For multi-codec configurations, an array of ids can be + given, one for each codec. + +Optional, relevant only with the "fsl,imx-audio-generic" compatible: + + - cpu-slot-width : Indicates a specific TDM slot width in bits. + - cpu-slot-num : Indicates a specific number of TDM slots per frame. + + - cpu-sysclk-freq-rx : Frequency of the CPU DAI sys clock for Rx. + - cpu-sysclk-freq-tx : Frequency of the CPU DAI sys clock for Tx. + + - cpu-sysclk-dir-rx-out : Boolean property. Specifies sys clock direction + as 'out' on initialization for Rx. + If not set, default direction is 'in'. + - cpu-sysclk-dir-tx-out : Boolean property. Specifies sys clock direction + as 'out' on initialization for Tx. + If not set, default direction is 'in'. Optional unless SSI is selected as a CPU DAI:
Add documentation about new dts bindings following new support for compatible "fsl,imx-audio-generic". Some CPU DAI don't require a real audio codec. The new compatible "fsl,imx-audio-generic" allows using the driver with codec drivers SPDIF DIT and SPDIF DIR as dummy codecs. It also allows using not pre-configured audio codecs which don't require specific control through a codec driver. The new dts properties give the possibility to set some parameters about the CPU DAI usually set through the codec configuration. Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com> Co-authored-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com> --- .../bindings/sound/fsl-asoc-card.txt | 28 ++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-)