diff mbox series

[v5,3/5] mfd: cs40l50: Add support for CS40L50 core driver

Message ID 20240104223643.876292-4-jogletre@opensource.cirrus.com (mailing list archive)
State New, archived
Headers show
Series Add support for CS40L50 | expand

Commit Message

James Ogletree Jan. 4, 2024, 10:36 p.m. UTC
Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.

The MFD component registers and initializes the device.

Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
---
 MAINTAINERS                 |   2 +
 drivers/mfd/Kconfig         |  30 ++
 drivers/mfd/Makefile        |   4 +
 drivers/mfd/cs40l50-core.c  | 536 ++++++++++++++++++++++++++++++++++++
 drivers/mfd/cs40l50-i2c.c   |  69 +++++
 drivers/mfd/cs40l50-spi.c   |  69 +++++
 include/linux/mfd/cs40l50.h | 128 +++++++++
 7 files changed, 838 insertions(+)
 create mode 100644 drivers/mfd/cs40l50-core.c
 create mode 100644 drivers/mfd/cs40l50-i2c.c
 create mode 100644 drivers/mfd/cs40l50-spi.c
 create mode 100644 include/linux/mfd/cs40l50.h

Comments

Charles Keepax Jan. 5, 2024, 2:04 p.m. UTC | #1
On Thu, Jan 04, 2024 at 10:36:36PM +0000, James Ogletree wrote:
> Introduce support for Cirrus Logic Device CS40L50: a
> haptic driver with waveform memory, integrated DSP,
> and closed-loop algorithms.
> 
> The MFD component registers and initializes the device.
> 
> Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
> ---
> +config MFD_CS40L50_CORE
> +	tristate
> +	select MFD_CORE
> +	select FW_CS_DSP
> +	select REGMAP_IRQ
> +
> +config MFD_CS40L50_I2C
> +	tristate "Cirrus Logic CS40L50 (I2C)"
> +	select REGMAP_I2C
> +	select MFD_CS40L50_CORE
> +	depends on I2C
> +	help
> +	  Select this to support the Cirrus Logic CS40L50 Haptic
> +	  Driver over I2C.
> +
> +	  This driver can be built as a module. If built as a module it will be
> +	  called "cs40l50-i2c".
> +
> +config MFD_CS40L50_SPI
> +	tristate "Cirrus Logic CS40L50 (SPI)"
> +	select REGMAP_SPI
> +	select MFD_CS40L50_CORE
> +	depends on SPI
> +	help
> +	  Select this to support the Cirrus Logic CS40L50 Haptic
> +	  Driver over SPI.
> +
> +	  This driver can be built as a module. If built as a module it will be
> +	  called "cs40l50-spi".
> +

Generally the order in Kconfigs should be alphabetical, probably
up around Cirrus Madera stuff would make most sense.

> +static int cs40l50_dsp_init(struct cs40l50 *cs40l50)
> +{
> +	int err;
> +
> +	cs40l50->dsp.num = 1;
> +	cs40l50->dsp.type = WMFW_HALO;
> +	cs40l50->dsp.dev = cs40l50->dev;
> +	cs40l50->dsp.regmap = cs40l50->regmap;
> +	cs40l50->dsp.base = CS40L50_CORE_BASE;
> +	cs40l50->dsp.base_sysinfo = CS40L50_SYS_INFO_ID;
> +	cs40l50->dsp.mem = cs40l50_dsp_regions;
> +	cs40l50->dsp.num_mems = ARRAY_SIZE(cs40l50_dsp_regions);
> +	cs40l50->dsp.no_core_startstop = true;
> +
> +	err = cs_dsp_halo_init(&cs40l50->dsp);
> +	if (err)
> +		return err;
> +
> +	return devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_remove,
> +					&cs40l50->dsp);

Hmm... I notice you use this for both dsp_remove and
dsp_power_down. Are you sure devm will guarantee those are called
in the right order? Its not immediately clear to me that would be
have to be the case.

> +static irqreturn_t cs40l50_irq_handler(int irq, void *data)
> +{
> +	struct cs40l50 *cs40l50 = data;
> +	int err;
> +
> +	mutex_lock(&cs40l50->lock);
> +
> +	if (irq == cs40l50_irqs[0].virq)
> +		err = cs40l50_process_dsp_queue(cs40l50);
> +	else
> +		err = cs40l50_handle_hw_err(cs40l50, irq);

Feels kinda weird to assign the same handler to every IRQ and
then depending on which IRQ it was call a different function.
Would it not be simpler just to assign a different handler?

> +static int cs40l50_power_up_dsp(struct cs40l50 *cs40l50)
> +{
> +	int err;
> +
> +	mutex_lock(&cs40l50->lock);
> +
> +	if (cs40l50->patch) {
> +		/* Stop core if loading patch file */
> +		err = regmap_multi_reg_write(cs40l50->regmap, cs40l50_stop_core,
> +					     ARRAY_SIZE(cs40l50_stop_core));
> +		if (err)
> +			goto err_mutex;
> +	}
> +
> +	err = cs_dsp_power_up(&cs40l50->dsp, cs40l50->patch, "cs40l50.wmfw",
> +			      cs40l50->bin, "cs40l50.bin", "cs40l50");
> +	if (err)
> +		goto err_mutex;
> +
> +	err = devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_power_down,
> +				       &cs40l50->dsp);
> +	if (err)
> +		goto err_mutex;
> +
> +	if (cs40l50->patch) {
> +		/* Resume core after loading patch file */
> +		err = regmap_write(cs40l50->regmap, CS40L50_CCM_CORE_CONTROL,
> +				   CS40L50_CLOCK_ENABLE);

This feels like this needs a comment, why are we skipping the
normal DSP init and doing it manually (this appears to be the
same writes start_core would have done)? I assume its something to
do with what you are really doing is you don't want lock_memory
to run?

> +static int cs40l50_configure_dsp(struct cs40l50 *cs40l50)
> +{
> +	u32 nwaves;
> +	int err;
> +
> +	if (cs40l50->bin) {
> +		/* Log number of effects if wavetable was loaded */
> +		err = regmap_read(cs40l50->regmap, CS40L50_NUM_WAVES, &nwaves);
> +		if (err)
> +			return err;
> +
> +		dev_info(cs40l50->dev, "Loaded with %u RAM waveforms\n", nwaves);

Kinda nervous about the fact we access all these DSP controls
directly through address, rather than using the DSP control
accessors, we have the accessors for a reason. They manage things
like access permissions etc. and historically, the firmware
guys have not been able to guarantee these remain in consistent
locations between firmware versions.

I guess this is so you can access them even in the case of the
ROM firmware, but you could have a meta-data only firmware file
that you load in that case to give you the controls.  I don't
feel the need to NAK the driver based on this but please think
about this very carefully it's a strange way to use the DSP
controls, and feels likely to cause problems to me. It is also
quite hostile to fixing it in the future since as you are not
using the controls no one will be checking that things like the
access flags in the firmware are set correctly, which is annoying
if the decision has to be reversed later since there will likely
be a bunch of broken firmwares already in the field.

> +int cs40l50_probe(struct cs40l50 *cs40l50)
> +{
> +	struct device *dev = cs40l50->dev;
> +	int err;
> +
> +	mutex_init(&cs40l50->lock);
> +
> +	cs40l50->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> +	if (IS_ERR(cs40l50->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(cs40l50->reset_gpio),
> +				     "Failed getting reset GPIO\n");
> +
> +	err = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(cs40l50_supplies),
> +					     cs40l50_supplies);
> +	if (err)
> +		return dev_err_probe(dev, err, "Failed getting supplies\n");
> +
> +	/* Ensure minimum reset pulse width */
> +	usleep_range(CS40L50_RESET_PULSE_US, CS40L50_RESET_PULSE_US + 100);
> +
> +	gpiod_set_value_cansleep(cs40l50->reset_gpio, 0);
> +
> +	/* Wait for control port to be ready */
> +	usleep_range(CS40L50_CP_READY_US, CS40L50_CP_READY_US + 100);
> +
> +	err = cs40l50_dsp_init(cs40l50);
> +	if (err)
> +		return dev_err_probe(dev, err, "Failed to initialize DSP\n");
> +
> +	cs40l50_pm_runtime_setup(dev);
> +
> +	err = cs40l50_get_model(cs40l50);
> +	if (err)
> +		return dev_err_probe(dev, err, "Failed to get part number\n");
> +
> +	err = cs40l50_irq_init(cs40l50);
> +	if (err)
> +		return dev_err_probe(dev, err, "Failed to initialize IRQs\n");
> +
> +	err = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, CS40L50_FW,
> +				      dev, GFP_KERNEL, cs40l50, cs40l50_request_patch);
> +	if (err)
> +		return dev_err_probe(dev, err, "Failed to request %s\n", CS40L50_FW);
> +
> +	err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, cs40l50_devs,
> +				   ARRAY_SIZE(cs40l50_devs), NULL, 0, NULL);
> +	if (err)
> +		return dev_err_probe(dev, err, "Failed to add sub devices\n");
> +

Do you want to add the child devices here? Or after the firmware
init has been done? If you do it here then the child devices may
well probe and become available before all the setup you have in
the DSP loading stuff is done. What happens if one of those
drivers tries to do something before init is complete?

> +static int cs40l50_runtime_resume(struct device *dev)
> +{
> +	struct cs40l50 *cs40l50 = dev_get_drvdata(dev);
> +	int err, i;
> +	u32 val;
> +
> +	/* Device NAKs when exiting hibernation, so optionally retry here. */
> +	for (i = 0; i < CS40L50_DSP_TIMEOUT_COUNT; i++) {
> +		err = regmap_write(cs40l50->regmap, CS40L50_DSP_QUEUE,
> +				     CS40L50_PREVENT_HIBER);
> +		if (!err)
> +			break;
> +
> +		usleep_range(CS40L50_DSP_POLL_US, CS40L50_DSP_POLL_US + 100);
> +	}

Are you comfortable with the behaviour here? If the chip fails to
respond before the TIMEOUT, you will proceed on and do the read
loop. Since the read loop is just looking for a zero in the
queue, it looks like if for some reason the chip was too slow to
respond this function would succeed despite the chip never
receiving the PREVENT_HIBER. Would it not be safer to skip the
read loop if you fail to send the PREVENT_HIBER?

> +
> +	for (i = 0; i < CS40L50_DSP_TIMEOUT_COUNT; i++) {
> +		err = regmap_read(cs40l50->regmap, CS40L50_DSP_QUEUE, &val);
> +		if (!err && val == 0)
> +			return 0;
> +
> +		usleep_range(CS40L50_DSP_POLL_US, CS40L50_DSP_POLL_US + 100);
> +	}

I am not sure if the ignoring errors is important here (as it is
for the first loop), but if it is a comment should be added to
say why, and if it isn't, couldn't this be a
regmap_read_poll_timeout instead of a manual loop?

> +++ b/drivers/mfd/cs40l50-spi.c
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * CS40L50 Advanced Haptic Driver with waveform memory,
> + * integrated DSP, and closed-loop algorithms
> + *
> + * Copyright 2023 Cirrus Logic, Inc.
> + *
> + * Author: James Ogletree <james.ogletree@cirrus.com>
> + */
> +
> +#include <linux/mfd/cs40l50.h>
> +#include <linux/mfd/spi.h>

Should be linux/spi/spi.h, make sure your build testing the whole
patch.

> +#ifndef __CS40L50_H__
> +#define __CS40L50_H__
> +
> +#include <linux/firmware/cirrus/cs_dsp.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/pm.h>
> +#include <linux/regmap.h>
> +
> +/* Power Supply Configuration */
> +#define CS40L50_BLOCK_ENABLES2			0x201C
> +#define CS40L50_ERR_RLS				0x2034
> +#define CS40L50_PWRMGT_CTL			0x2900
> +#define CS40L50_BST_LPMODE_SEL			0x3810
> +#define CS40L50_DCM_LOW_POWER		0x1
> +#define CS40L50_OVERTEMP_WARN		0x4000010
> +
> +/* Interrupts */
> +#define CS40L50_IRQ1_INT_1			0xE010
> +#define CS40L50_IRQ1_MASK_1			0xE090
> +#define CS40L50_IRQ1_MASK_2			0xE094
> +#define CS40L50_IRQ1_MASK_20			0xE0DC
> +#define CS40L50_IRQ_MASK_2_OVERRIDE	0xFFDF7FFF
> +#define CS40L50_IRQ_MASK_20_OVERRIDE	0x15C01000
> +#define CS40L50_IRQ1_INT_1_OFFSET	(4 * 0)
> +#define CS40L50_IRQ1_INT_2_OFFSET	(4 * 1)
> +#define CS40L50_IRQ1_INT_8_OFFSET	(4 * 7)
> +#define CS40L50_IRQ1_INT_9_OFFSET	(4 * 8)
> +#define CS40L50_IRQ1_INT_10_OFFSET	(4 * 9)
> +#define CS40L50_IRQ1_INT_18_OFFSET	(4 * 17)
> +#define CS40L50_GLOBAL_ERR_RLS_SET	BIT(11)
> +#define CS40L50_GLOBAL_ERR_RLS_CLEAR	0
> +#define CS40L50_AMP_SHORT_MASK		BIT(31)
> +#define CS40L50_DSP_QUEUE_MASK		BIT(21)
> +#define CS40L50_TEMP_ERR_MASK		BIT(31)
> +#define CS40L50_BST_UVP_MASK		BIT(6)
> +#define CS40L50_BST_SHORT_MASK		BIT(7)
> +#define CS40L50_BST_ILIMIT_MASK		BIT(18)
> +#define CS40L50_UVLO_VDDBATT_MASK	BIT(16)
> +#define CS40L50_GLOBAL_ERROR_MASK	BIT(15)
> +
> +enum cs40l50_irq_list {
> +	CS40L50_DSP_QUEUE_IRQ,
> +	CS40L50_GLOBAL_ERROR_IRQ,
> +	CS40L50_UVLO_VDDBATT_IRQ,
> +	CS40L50_BST_ILIMIT_IRQ,
> +	CS40L50_BST_SHORT_IRQ,
> +	CS40L50_BST_UVP_IRQ,
> +	CS40L50_TEMP_ERR_IRQ,
> +	CS40L50_AMP_SHORT_IRQ,
> +};
> +
> +/* DSP */
> +#define CS40L50_XMEM_PACKED_0			0x2000000
> +#define CS40L50_XMEM_UNPACKED24_0		0x2800000
> +#define CS40L50_SYS_INFO_ID			0x25E0000
> +#define CS40L50_RAM_INIT			0x28021DC
> +#define CS40L50_DSP_QUEUE_WT			0x28042C8
> +#define CS40L50_DSP_QUEUE_RD			0x28042CC
> +#define CS40L50_POWER_ON_WSEQ			0x2804320
> +#define CS40L50_NUM_WAVES			0x280CB4C
> +#define CS40L50_CORE_BASE			0x2B80000
> +#define CS40L50_CCM_CORE_CONTROL		0x2BC1000
> +#define CS40L50_YMEM_PACKED_0			0x2C00000
> +#define CS40L50_YMEM_UNPACKED24_0		0x3400000
> +#define CS40L50_PMEM_0				0x3800000
> +#define CS40L50_MEM_RDY_HW		0x2
> +#define CS40L50_RAM_INIT_FLAG		0x1
> +#define CS40L50_CLOCK_DISABLE		0x80
> +#define CS40L50_CLOCK_ENABLE		0x281
> +#define CS40L50_DSP_POLL_US		1000
> +#define CS40L50_DSP_TIMEOUT_COUNT	100
> +#define CS40L50_RESET_PULSE_US		2200
> +#define CS40L50_CP_READY_US		3100
> +#define CS40L50_AUTOSUSPEND_MS		2000
> +#define CS40L50_PSEQ_SIZE		200
> +
> +/* DSP Commands */
> +#define CS40L50_DSP_QUEUE_BASE		0x11004
> +#define CS40L50_DSP_QUEUE_END		0x1101C
> +#define CS40L50_DSP_QUEUE		0x11020
> +#define CS40L50_PREVENT_HIBER	0x2000003
> +#define CS40L50_ALLOW_HIBER	0x2000004
> +#define CS40L50_START_I2S	0x3000002
> +#define CS40L50_OWT_PUSH	0x3000008
> +#define CS40L50_STOP_PLAYBACK	0x5000000
> +#define CS40L50_OWT_DELETE	0xD000000
> +
> +/* Firmware files */
> +#define CS40L50_FW	"cs40l50.wmfw"
> +#define CS40L50_WT	"cs40l50.bin"
> +
> +/* Device */
> +#define CS40L50_DEVID			0x0
> +#define CS40L50_REVID			0x4
> +#define CS40L50_DEVID_A		0x40A50
> +#define CS40L50_REVID_B0	0xB0

Admittedly a bit nitpicky but the tabbing here is all over the
place, would be nicer to line up the values on these defines.

Thanks,
Charles
James Ogletree Jan. 9, 2024, 9:08 p.m. UTC | #2
Hi Charles,

Thank you for your excellent review. Anything not replied to will be
adopted as-is in the next version.

> On Jan 5, 2024, at 8:04 AM, Charles Keepax <ckeepax@opensource.cirrus.com> wrote:
> 
> On Thu, Jan 04, 2024 at 10:36:36PM +0000, James Ogletree wrote
> 
>> +static int cs40l50_dsp_init(struct cs40l50 *cs40l50)
>> +{
>> + int err;
>> +
>> + cs40l50->dsp.num = 1;
>> + cs40l50->dsp.type = WMFW_HALO;
>> + cs40l50->dsp.dev = cs40l50->dev;
>> + cs40l50->dsp.regmap = cs40l50->regmap;
>> + cs40l50->dsp.base = CS40L50_CORE_BASE;
>> + cs40l50->dsp.base_sysinfo = CS40L50_SYS_INFO_ID;
>> + cs40l50->dsp.mem = cs40l50_dsp_regions;
>> + cs40l50->dsp.num_mems = ARRAY_SIZE(cs40l50_dsp_regions);
>> + cs40l50->dsp.no_core_startstop = true;
>> +
>> + err = cs_dsp_halo_init(&cs40l50->dsp);
>> + if (err)
>> + return err;
>> +
>> + return devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_remove,
>> + &cs40l50->dsp);
> 
> Hmm... I notice you use this for both dsp_remove and
> dsp_power_down. Are you sure devm will guarantee those are called
> in the right order? Its not immediately clear to me that would be
> have to be the case.

On my inspection of the devm code, actions are always added to the
tail, and played back from head to tail on driver detach.

> 
>> +static int cs40l50_power_up_dsp(struct cs40l50 *cs40l50)
>> +{
>> + int err;
>> +
>> + mutex_lock(&cs40l50->lock);
>> +
>> + if (cs40l50->patch) {
>> + /* Stop core if loading patch file */
>> + err = regmap_multi_reg_write(cs40l50->regmap, cs40l50_stop_core,
>> +     ARRAY_SIZE(cs40l50_stop_core));
>> + if (err)
>> + goto err_mutex;
>> + }
>> +
>> + err = cs_dsp_power_up(&cs40l50->dsp, cs40l50->patch, "cs40l50.wmfw",
>> +      cs40l50->bin, "cs40l50.bin", "cs40l50");
>> + if (err)
>> + goto err_mutex;
>> +
>> + err = devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_power_down,
>> +       &cs40l50->dsp);
>> + if (err)
>> + goto err_mutex;
>> +
>> + if (cs40l50->patch) {
>> + /* Resume core after loading patch file */
>> + err = regmap_write(cs40l50->regmap, CS40L50_CCM_CORE_CONTROL,
>> +   CS40L50_CLOCK_ENABLE);
> 
> This feels like this needs a comment, why are we skipping the
> normal DSP init and doing it manually (this appears to be the
> same writes start_core would have done)? I assume its something to
> do with what you are really doing is you don't want lock_memory
> to run?

The dsp struct uses cs_dsp_halo_ao_ops, made for self-booting
DSPs, which has none of the ops used in cs_dsp_run(). The
manual stop is because it is self-booting (already running you could
say) but we need to stop the clock to patch the firmware. Please
correct me if that is not right.

>> +static int cs40l50_configure_dsp(struct cs40l50 *cs40l50)
>> +{
>> + u32 nwaves;
>> + int err;
>> +
>> + if (cs40l50->bin) {
>> + /* Log number of effects if wavetable was loaded */
>> + err = regmap_read(cs40l50->regmap, CS40L50_NUM_WAVES, &nwaves);
>> + if (err)
>> + return err;
>> +
>> + dev_info(cs40l50->dev, "Loaded with %u RAM waveforms\n", nwaves);
> 
> Kinda nervous about the fact we access all these DSP controls
> directly through address, rather than using the DSP control
> accessors, we have the accessors for a reason. They manage things
> like access permissions etc. and historically, the firmware
> guys have not been able to guarantee these remain in consistent
> locations between firmware versions.
> 
> I guess this is so you can access them even in the case of the
> ROM firmware, but you could have a meta-data only firmware file
> that you load in that case to give you the controls.  I don't
> feel the need to NAK the driver based on this but please think
> about this very carefully it's a strange way to use the DSP
> controls, and feels likely to cause problems to me. It is also
> quite hostile to fixing it in the future since as you are not
> using the controls no one will be checking that things like the
> access flags in the firmware are set correctly, which is annoying
> if the decision has to be reversed later since there will likely
> be a bunch of broken firmwares already in the field.

Noting here that we discussed this offline. The driver is going to
stay with a static register design for now, but the write sequence
interface is being modified to be control based.

Best,
James
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index b71017a187f8..69a9e0a3b968 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4940,6 +4940,8 @@  M:	Ben Bright <ben.bright@cirrus.com>
 L:	patches@opensource.cirrus.com
 S:	Supported
 F:	Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
+F:	drivers/mfd/cs40l*
+F:	include/linux/mfd/cs40l*
 
 CIRRUS LOGIC DSP FIRMWARE DRIVER
 M:	Simon Trimmer <simont@opensource.cirrus.com>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 90ce58fd629e..6273c255f107 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2241,6 +2241,36 @@  config MCP_UCB1200_TS
 
 endmenu
 
+config MFD_CS40L50_CORE
+	tristate
+	select MFD_CORE
+	select FW_CS_DSP
+	select REGMAP_IRQ
+
+config MFD_CS40L50_I2C
+	tristate "Cirrus Logic CS40L50 (I2C)"
+	select REGMAP_I2C
+	select MFD_CS40L50_CORE
+	depends on I2C
+	help
+	  Select this to support the Cirrus Logic CS40L50 Haptic
+	  Driver over I2C.
+
+	  This driver can be built as a module. If built as a module it will be
+	  called "cs40l50-i2c".
+
+config MFD_CS40L50_SPI
+	tristate "Cirrus Logic CS40L50 (SPI)"
+	select REGMAP_SPI
+	select MFD_CS40L50_CORE
+	depends on SPI
+	help
+	  Select this to support the Cirrus Logic CS40L50 Haptic
+	  Driver over SPI.
+
+	  This driver can be built as a module. If built as a module it will be
+	  called "cs40l50-spi".
+
 config MFD_VEXPRESS_SYSREG
 	tristate "Versatile Express System Registers"
 	depends on VEXPRESS_CONFIG && GPIOLIB
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c66f07edcd0e..a8d18ba155d0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -88,6 +88,10 @@  obj-$(CONFIG_MFD_MADERA)	+= madera.o
 obj-$(CONFIG_MFD_MADERA_I2C)	+= madera-i2c.o
 obj-$(CONFIG_MFD_MADERA_SPI)	+= madera-spi.o
 
+obj-$(CONFIG_MFD_CS40L50_CORE)	+= cs40l50-core.o
+obj-$(CONFIG_MFD_CS40L50_I2C)	+= cs40l50-i2c.o
+obj-$(CONFIG_MFD_CS40L50_SPI)	+= cs40l50-spi.o
+
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
diff --git a/drivers/mfd/cs40l50-core.c b/drivers/mfd/cs40l50-core.c
new file mode 100644
index 000000000000..ecc7846e9f8d
--- /dev/null
+++ b/drivers/mfd/cs40l50-core.c
@@ -0,0 +1,536 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#include <linux/firmware/cirrus/cs_dsp.h>
+#include <linux/firmware/cirrus/wmfw.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/cs40l50.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+
+static const struct mfd_cell cs40l50_devs[] = {
+	{ .name = "cs40l50-codec", },
+	{ .name = "cs40l50-vibra", },
+};
+
+const struct regmap_config cs40l50_regmap = {
+	.reg_bits =		32,
+	.reg_stride =		4,
+	.val_bits =		32,
+	.reg_format_endian =	REGMAP_ENDIAN_BIG,
+	.val_format_endian =	REGMAP_ENDIAN_BIG,
+};
+EXPORT_SYMBOL_GPL(cs40l50_regmap);
+
+static const char * const cs40l50_supplies[] = {
+	"vp", "vio",
+};
+
+static const struct regmap_irq cs40l50_reg_irqs[] = {
+	REGMAP_IRQ_REG(CS40L50_DSP_QUEUE_IRQ, CS40L50_IRQ1_INT_2_OFFSET,
+		       CS40L50_DSP_QUEUE_MASK),
+	REGMAP_IRQ_REG(CS40L50_AMP_SHORT_IRQ, CS40L50_IRQ1_INT_1_OFFSET,
+		       CS40L50_AMP_SHORT_MASK),
+	REGMAP_IRQ_REG(CS40L50_TEMP_ERR_IRQ, CS40L50_IRQ1_INT_8_OFFSET,
+		       CS40L50_TEMP_ERR_MASK),
+	REGMAP_IRQ_REG(CS40L50_BST_UVP_IRQ, CS40L50_IRQ1_INT_9_OFFSET,
+		       CS40L50_BST_UVP_MASK),
+	REGMAP_IRQ_REG(CS40L50_BST_SHORT_IRQ, CS40L50_IRQ1_INT_9_OFFSET,
+		       CS40L50_BST_SHORT_MASK),
+	REGMAP_IRQ_REG(CS40L50_BST_ILIMIT_IRQ, CS40L50_IRQ1_INT_9_OFFSET,
+		       CS40L50_BST_ILIMIT_MASK),
+	REGMAP_IRQ_REG(CS40L50_UVLO_VDDBATT_IRQ, CS40L50_IRQ1_INT_10_OFFSET,
+		       CS40L50_UVLO_VDDBATT_MASK),
+	REGMAP_IRQ_REG(CS40L50_GLOBAL_ERROR_IRQ, CS40L50_IRQ1_INT_18_OFFSET,
+		       CS40L50_GLOBAL_ERROR_MASK),
+};
+
+static struct regmap_irq_chip cs40l50_irq_chip = {
+	.name =		"CS40L50 IRQ Controller",
+
+	.status_base =	CS40L50_IRQ1_INT_1,
+	.mask_base =	CS40L50_IRQ1_MASK_1,
+	.ack_base =	CS40L50_IRQ1_INT_1,
+	.num_regs =	22,
+
+	.irqs =		cs40l50_reg_irqs,
+	.num_irqs =	ARRAY_SIZE(cs40l50_reg_irqs),
+
+	.runtime_pm =	true,
+};
+
+static const struct cs_dsp_region cs40l50_dsp_regions[] = {
+	{
+		.type = WMFW_HALO_PM_PACKED,
+		.base = CS40L50_PMEM_0
+	},
+	{
+		.type = WMFW_HALO_XM_PACKED,
+		.base = CS40L50_XMEM_PACKED_0
+	},
+	{
+		.type = WMFW_HALO_YM_PACKED,
+		.base = CS40L50_YMEM_PACKED_0
+	},
+	{
+		.type = WMFW_ADSP2_XM,
+		.base = CS40L50_XMEM_UNPACKED24_0
+	},
+	{
+		.type = WMFW_ADSP2_YM,
+		.base = CS40L50_YMEM_UNPACKED24_0
+	},
+};
+
+static void cs40l50_dsp_remove(void *data)
+{
+	cs_dsp_remove((struct cs_dsp *)data);
+}
+
+static int cs40l50_dsp_init(struct cs40l50 *cs40l50)
+{
+	int err;
+
+	cs40l50->dsp.num = 1;
+	cs40l50->dsp.type = WMFW_HALO;
+	cs40l50->dsp.dev = cs40l50->dev;
+	cs40l50->dsp.regmap = cs40l50->regmap;
+	cs40l50->dsp.base = CS40L50_CORE_BASE;
+	cs40l50->dsp.base_sysinfo = CS40L50_SYS_INFO_ID;
+	cs40l50->dsp.mem = cs40l50_dsp_regions;
+	cs40l50->dsp.num_mems = ARRAY_SIZE(cs40l50_dsp_regions);
+	cs40l50->dsp.no_core_startstop = true;
+
+	err = cs_dsp_halo_init(&cs40l50->dsp);
+	if (err)
+		return err;
+
+	return devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_remove,
+					&cs40l50->dsp);
+}
+
+static const struct reg_sequence cs40l50_err_rls[] = {
+	{ CS40L50_ERR_RLS, CS40L50_GLOBAL_ERR_RLS_SET },
+	{ CS40L50_ERR_RLS, CS40L50_GLOBAL_ERR_RLS_CLEAR },
+};
+
+struct cs40l50_irq {
+	char *name;
+	u32 virq;
+};
+
+static struct cs40l50_irq cs40l50_irqs[] = {
+	{ .name = "DSP", },
+	{ .name = "Global", },
+	{ .name = "Boost UVLO", },
+	{ .name = "Boost current limit", },
+	{ .name = "Boost short", },
+	{ .name = "Boost undervolt", },
+	{ .name = "Overtemp", },
+	{ .name = "Amp short", },
+};
+
+static int cs40l50_handle_hw_err(struct cs40l50 *cs40l50, int irq)
+{
+	int i;
+
+	/* Log hardware interrupt and execute error release sequence */
+	for (i = 1; i < ARRAY_SIZE(cs40l50_irqs); i++) {
+		if (cs40l50_irqs[i].virq == irq) {
+			dev_err(cs40l50->dev, "%s error\n", cs40l50_irqs[i].name);
+			return regmap_multi_reg_write(cs40l50->regmap, cs40l50_err_rls,
+						      ARRAY_SIZE(cs40l50_err_rls));
+		}
+	}
+
+	return 0;
+}
+
+static int cs40l50_process_dsp_queue(struct cs40l50 *cs40l50)
+{
+	u32 val, rd_ptr, wt_ptr;
+	int err = 0;
+
+	/* Read from DSP queue and update read pointer */
+	while (!err) {
+		err = regmap_read(cs40l50->regmap, CS40L50_DSP_QUEUE_WT, &wt_ptr);
+		if (err)
+			break;
+
+		err = regmap_read(cs40l50->regmap, CS40L50_DSP_QUEUE_RD, &rd_ptr);
+		if (err)
+			break;
+
+		/* Check if queue is empty */
+		if (wt_ptr == rd_ptr)
+			break;
+
+		err = regmap_read(cs40l50->regmap, rd_ptr, &val);
+		if (err)
+			break;
+
+		dev_dbg(cs40l50->dev, "DSP payload: %#X", val);
+
+		rd_ptr += sizeof(u32);
+
+		if (rd_ptr > CS40L50_DSP_QUEUE_END)
+			rd_ptr = CS40L50_DSP_QUEUE_BASE;
+
+		err =  regmap_write(cs40l50->regmap, CS40L50_DSP_QUEUE_RD, rd_ptr);
+		if (err)
+			break;
+	}
+
+	return err;
+}
+
+static irqreturn_t cs40l50_irq_handler(int irq, void *data)
+{
+	struct cs40l50 *cs40l50 = data;
+	int err;
+
+	mutex_lock(&cs40l50->lock);
+
+	if (irq == cs40l50_irqs[0].virq)
+		err = cs40l50_process_dsp_queue(cs40l50);
+	else
+		err = cs40l50_handle_hw_err(cs40l50, irq);
+
+	mutex_unlock(&cs40l50->lock);
+
+	return IRQ_RETVAL(!err);
+}
+
+
+static int cs40l50_irq_init(struct cs40l50 *cs40l50)
+{
+	struct device *dev = cs40l50->dev;
+	int i, err, virq;
+
+	err = devm_regmap_add_irq_chip(dev, cs40l50->regmap, cs40l50->irq,
+				       IRQF_ONESHOT | IRQF_SHARED, 0,
+				       &cs40l50_irq_chip, &cs40l50->irq_data);
+	if (err) {
+		dev_err(dev, "Failed adding IRQ chip\n");
+		return err;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(cs40l50_irqs); i++) {
+		virq = regmap_irq_get_virq(cs40l50->irq_data, i);
+		if (virq < 0) {
+			dev_err(dev, "Failed getting %s\n", cs40l50_irqs[i].name);
+			return virq;
+		}
+
+		cs40l50_irqs[i].virq = virq;
+
+		err = devm_request_threaded_irq(dev, virq, NULL,
+						cs40l50_irq_handler,
+						IRQF_ONESHOT | IRQF_SHARED,
+						cs40l50_irqs[i].name, cs40l50);
+		if (err) {
+			dev_err(dev, "Failed requesting %s\n", cs40l50_irqs[i].name);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static const struct reg_sequence cs40l50_stop_core[] = {
+	{ CS40L50_CCM_CORE_CONTROL, CS40L50_CLOCK_DISABLE},
+	{ CS40L50_RAM_INIT, CS40L50_RAM_INIT_FLAG},
+	{ CS40L50_PWRMGT_CTL, CS40L50_MEM_RDY_HW},
+};
+
+static const struct reg_sequence cs40l50_internal_vamp_config[] = {
+	{ CS40L50_BST_LPMODE_SEL,	CS40L50_DCM_LOW_POWER },
+	{ CS40L50_BLOCK_ENABLES2,	CS40L50_OVERTEMP_WARN },
+};
+
+static const struct reg_sequence cs40l50_irq_mask_override[] = {
+	{ CS40L50_IRQ1_MASK_2,	CS40L50_IRQ_MASK_2_OVERRIDE },
+	{ CS40L50_IRQ1_MASK_20,	CS40L50_IRQ_MASK_20_OVERRIDE },
+};
+
+static void cs40l50_dsp_power_down(void *data)
+{
+	cs_dsp_power_down((struct cs_dsp *)data);
+}
+
+static int cs40l50_power_up_dsp(struct cs40l50 *cs40l50)
+{
+	int err;
+
+	mutex_lock(&cs40l50->lock);
+
+	if (cs40l50->patch) {
+		/* Stop core if loading patch file */
+		err = regmap_multi_reg_write(cs40l50->regmap, cs40l50_stop_core,
+					     ARRAY_SIZE(cs40l50_stop_core));
+		if (err)
+			goto err_mutex;
+	}
+
+	err = cs_dsp_power_up(&cs40l50->dsp, cs40l50->patch, "cs40l50.wmfw",
+			      cs40l50->bin, "cs40l50.bin", "cs40l50");
+	if (err)
+		goto err_mutex;
+
+	err = devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_power_down,
+				       &cs40l50->dsp);
+	if (err)
+		goto err_mutex;
+
+	if (cs40l50->patch) {
+		/* Resume core after loading patch file */
+		err = regmap_write(cs40l50->regmap, CS40L50_CCM_CORE_CONTROL,
+				   CS40L50_CLOCK_ENABLE);
+		if (err)
+			goto err_mutex;
+	}
+err_mutex:
+	mutex_unlock(&cs40l50->lock);
+
+	return err;
+}
+
+static struct cs_dsp_wseq cs40l50_wseqs[] = {
+	{
+		.reg =	CS40L50_POWER_ON_WSEQ,
+		.size = CS40L50_PSEQ_SIZE
+	},
+};
+
+static int cs40l50_configure_dsp(struct cs40l50 *cs40l50)
+{
+	u32 nwaves;
+	int err;
+
+	if (cs40l50->bin) {
+		/* Log number of effects if wavetable was loaded */
+		err = regmap_read(cs40l50->regmap, CS40L50_NUM_WAVES, &nwaves);
+		if (err)
+			return err;
+
+		dev_info(cs40l50->dev, "Loaded with %u RAM waveforms\n", nwaves);
+	}
+
+	err = cs_dsp_wseq_init(&cs40l50->dsp, cs40l50_wseqs,
+			       ARRAY_SIZE(cs40l50_wseqs));
+	if (err) {
+		dev_err(cs40l50->dev, "Failed to initialize write sequence\n");
+		return err;
+	}
+
+	/* Configure CS40L50 to use an internal V_AMP supply */
+	err = regmap_multi_reg_write(cs40l50->regmap, cs40l50_internal_vamp_config,
+				     ARRAY_SIZE(cs40l50_internal_vamp_config));
+	if (err)
+		return err;
+
+	err = cs_dsp_wseq_multi_write(&cs40l50->dsp, &cs40l50_wseqs[0],
+				      cs40l50_internal_vamp_config,
+				      ARRAY_SIZE(cs40l50_internal_vamp_config),
+				      false, CS_DSP_WSEQ_FULL);
+	if (err)
+		return err;
+
+	/* Override firmware defaults for IRQ masks */
+	err = regmap_multi_reg_write(cs40l50->regmap, cs40l50_irq_mask_override,
+				     ARRAY_SIZE(cs40l50_irq_mask_override));
+	if (err)
+		return err;
+
+	return cs_dsp_wseq_multi_write(&cs40l50->dsp, &cs40l50_wseqs[0],
+				       cs40l50_irq_mask_override,
+				       ARRAY_SIZE(cs40l50_irq_mask_override),
+				       false, CS_DSP_WSEQ_FULL);
+}
+
+static void cs40l50_start_dsp(const struct firmware *bin, void *context)
+{
+	struct cs40l50 *cs40l50 = context;
+	int err;
+
+	/* Wavetable is optional; proceed even if NULL */
+	cs40l50->bin = bin;
+
+	err = cs40l50_power_up_dsp(cs40l50);
+	if (err) {
+		dev_err(cs40l50->dev, "Failed to power up DSP: %d\n", err);
+		goto err_fw;
+	}
+
+	err = cs40l50_configure_dsp(cs40l50);
+	if (err)
+		dev_err(cs40l50->dev, "Failed to configure DSP: %d\n", err);
+
+err_fw:
+	release_firmware(cs40l50->bin);
+	release_firmware(cs40l50->patch);
+}
+
+static void cs40l50_request_patch(const struct firmware *patch, void *context)
+{
+	struct cs40l50 *cs40l50 = context;
+
+	/* Patch file is optional; proceed even if NULL */
+	cs40l50->patch = patch;
+
+	if (request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, CS40L50_WT,
+				    cs40l50->dev, GFP_KERNEL,
+				    cs40l50, cs40l50_start_dsp)) {
+		dev_err(cs40l50->dev, "Failed to request %s\n", CS40L50_WT);
+		release_firmware(cs40l50->patch);
+	}
+}
+
+static int cs40l50_get_model(struct cs40l50 *cs40l50)
+{
+	struct device *dev = cs40l50->dev;
+	int err;
+
+	err = regmap_read(cs40l50->regmap, CS40L50_DEVID, &cs40l50->devid);
+	if (err)
+		return err;
+
+	if (cs40l50->devid != CS40L50_DEVID_A)
+		return -EINVAL;
+
+	err = regmap_read(cs40l50->regmap, CS40L50_REVID, &cs40l50->revid);
+	if (err)
+		return err;
+
+	if (cs40l50->revid < CS40L50_REVID_B0)
+		return -EINVAL;
+
+	dev_info(dev, "Cirrus Logic CS40L50 revision %02X\n", cs40l50->revid);
+
+	return 0;
+}
+
+static void cs40l50_pm_runtime_setup(struct device *dev)
+{
+	pm_runtime_set_autosuspend_delay(dev, CS40L50_AUTOSUSPEND_MS);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_get_noresume(dev);
+	devm_pm_runtime_enable(dev);
+}
+
+int cs40l50_probe(struct cs40l50 *cs40l50)
+{
+	struct device *dev = cs40l50->dev;
+	int err;
+
+	mutex_init(&cs40l50->lock);
+
+	cs40l50->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(cs40l50->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(cs40l50->reset_gpio),
+				     "Failed getting reset GPIO\n");
+
+	err = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(cs40l50_supplies),
+					     cs40l50_supplies);
+	if (err)
+		return dev_err_probe(dev, err, "Failed getting supplies\n");
+
+	/* Ensure minimum reset pulse width */
+	usleep_range(CS40L50_RESET_PULSE_US, CS40L50_RESET_PULSE_US + 100);
+
+	gpiod_set_value_cansleep(cs40l50->reset_gpio, 0);
+
+	/* Wait for control port to be ready */
+	usleep_range(CS40L50_CP_READY_US, CS40L50_CP_READY_US + 100);
+
+	err = cs40l50_dsp_init(cs40l50);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to initialize DSP\n");
+
+	cs40l50_pm_runtime_setup(dev);
+
+	err = cs40l50_get_model(cs40l50);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to get part number\n");
+
+	err = cs40l50_irq_init(cs40l50);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to initialize IRQs\n");
+
+	err = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, CS40L50_FW,
+				      dev, GFP_KERNEL, cs40l50, cs40l50_request_patch);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to request %s\n", CS40L50_FW);
+
+	err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, cs40l50_devs,
+				   ARRAY_SIZE(cs40l50_devs), NULL, 0, NULL);
+	if (err)
+		return dev_err_probe(dev, err, "Failed to add sub devices\n");
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cs40l50_probe);
+
+int cs40l50_remove(struct cs40l50 *cs40l50)
+{
+	gpiod_set_value_cansleep(cs40l50->reset_gpio, 1);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cs40l50_remove);
+
+static int cs40l50_runtime_suspend(struct device *dev)
+{
+	struct cs40l50 *cs40l50 = dev_get_drvdata(dev);
+
+	return regmap_write(cs40l50->regmap, CS40L50_DSP_QUEUE, CS40L50_ALLOW_HIBER);
+}
+
+static int cs40l50_runtime_resume(struct device *dev)
+{
+	struct cs40l50 *cs40l50 = dev_get_drvdata(dev);
+	int err, i;
+	u32 val;
+
+	/* Device NAKs when exiting hibernation, so optionally retry here. */
+	for (i = 0; i < CS40L50_DSP_TIMEOUT_COUNT; i++) {
+		err = regmap_write(cs40l50->regmap, CS40L50_DSP_QUEUE,
+				     CS40L50_PREVENT_HIBER);
+		if (!err)
+			break;
+
+		usleep_range(CS40L50_DSP_POLL_US, CS40L50_DSP_POLL_US + 100);
+	}
+
+	for (i = 0; i < CS40L50_DSP_TIMEOUT_COUNT; i++) {
+		err = regmap_read(cs40l50->regmap, CS40L50_DSP_QUEUE, &val);
+		if (!err && val == 0)
+			return 0;
+
+		usleep_range(CS40L50_DSP_POLL_US, CS40L50_DSP_POLL_US + 100);
+	}
+
+	dev_err(cs40l50->dev, "Failed to resume: %d\n", err ?: -ETIMEDOUT);
+
+	return err ?: -ETIMEDOUT;
+}
+
+EXPORT_GPL_DEV_PM_OPS(cs40l50_pm_ops) = {
+	RUNTIME_PM_OPS(cs40l50_runtime_suspend, cs40l50_runtime_resume, NULL)
+};
+
+MODULE_DESCRIPTION("CS40L50 Advanced Haptic Driver");
+MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(FW_CS_DSP);
diff --git a/drivers/mfd/cs40l50-i2c.c b/drivers/mfd/cs40l50-i2c.c
new file mode 100644
index 000000000000..5214b611ed5c
--- /dev/null
+++ b/drivers/mfd/cs40l50-i2c.c
@@ -0,0 +1,69 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/cs40l50.h>
+
+static int cs40l50_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct cs40l50 *cs40l50;
+
+	cs40l50 = devm_kzalloc(dev, sizeof(*cs40l50), GFP_KERNEL);
+	if (!cs40l50)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, cs40l50);
+
+	cs40l50->regmap = devm_regmap_init_i2c(client, &cs40l50_regmap);
+	if (IS_ERR(cs40l50->regmap))
+		return dev_err_probe(cs40l50->dev, PTR_ERR(cs40l50->regmap),
+				     "Failed to initialize register map\n");
+
+	cs40l50->dev = dev;
+	cs40l50->irq = client->irq;
+
+	return cs40l50_probe(cs40l50);
+}
+
+static void cs40l50_i2c_remove(struct i2c_client *client)
+{
+	struct cs40l50 *cs40l50 = i2c_get_clientdata(client);
+
+	cs40l50_remove(cs40l50);
+}
+
+static const struct i2c_device_id cs40l50_id_i2c[] = {
+	{"cs40l50"},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cs40l50_id_i2c);
+
+static const struct of_device_id cs40l50_of_match[] = {
+	{ .compatible = "cirrus,cs40l50" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cs40l50_of_match);
+
+static struct i2c_driver cs40l50_i2c_driver = {
+	.driver = {
+		.name = "cs40l50",
+		.of_match_table = cs40l50_of_match,
+		.pm = pm_ptr(&cs40l50_pm_ops),
+	},
+	.id_table = cs40l50_id_i2c,
+	.probe = cs40l50_i2c_probe,
+	.remove = cs40l50_i2c_remove,
+};
+module_i2c_driver(cs40l50_i2c_driver);
+
+MODULE_DESCRIPTION("CS40L50 I2C Driver");
+MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/cs40l50-spi.c b/drivers/mfd/cs40l50-spi.c
new file mode 100644
index 000000000000..a7468ea53acd
--- /dev/null
+++ b/drivers/mfd/cs40l50-spi.c
@@ -0,0 +1,69 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#include <linux/mfd/cs40l50.h>
+#include <linux/mfd/spi.h>
+
+static int cs40l50_spi_probe(struct spi_device *spi)
+{
+	struct cs40l50 *cs40l50;
+	struct device *dev = &spi->dev;
+
+	cs40l50 = devm_kzalloc(dev, sizeof(*cs40l50), GFP_KERNEL);
+	if (!cs40l50)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, cs40l50);
+
+	cs40l50->regmap = devm_regmap_init_spi(spi, &cs40l50_regmap);
+	if (IS_ERR(cs40l50->regmap))
+		return dev_err_probe(cs40l50->dev, PTR_ERR(cs40l50->regmap),
+				     "Failed to initialize register map\n");
+
+	cs40l50->dev = dev;
+	cs40l50->irq = spi->irq;
+
+	return cs40l50_probe(cs40l50);
+}
+
+static void cs40l50_spi_remove(struct spi_device *spi)
+{
+	struct cs40l50 *cs40l50 = spi_get_drvdata(spi);
+
+	cs40l50_remove(cs40l50);
+}
+
+static const struct spi_device_id cs40l50_id_spi[] = {
+	{"cs40l50"},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, cs40l50_id_spi);
+
+static const struct of_device_id cs40l50_of_match[] = {
+	{ .compatible = "cirrus,cs40l50" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cs40l50_of_match);
+
+static struct spi_driver cs40l50_spi_driver = {
+	.driver = {
+		.name = "cs40l50",
+		.of_match_table = cs40l50_of_match,
+		.pm = pm_ptr(&cs40l50_pm_ops),
+	},
+	.id_table = cs40l50_id_spi,
+	.probe = cs40l50_spi_probe,
+	.remove = cs40l50_spi_remove,
+};
+module_spi_driver(cs40l50_spi_driver);
+
+MODULE_DESCRIPTION("CS40L50 SPI Driver");
+MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/cs40l50.h b/include/linux/mfd/cs40l50.h
new file mode 100644
index 000000000000..260f192f4dfd
--- /dev/null
+++ b/include/linux/mfd/cs40l50.h
@@ -0,0 +1,128 @@ 
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#ifndef __CS40L50_H__
+#define __CS40L50_H__
+
+#include <linux/firmware/cirrus/cs_dsp.h>
+#include <linux/gpio/consumer.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+
+/* Power Supply Configuration */
+#define CS40L50_BLOCK_ENABLES2			0x201C
+#define CS40L50_ERR_RLS				0x2034
+#define CS40L50_PWRMGT_CTL			0x2900
+#define CS40L50_BST_LPMODE_SEL			0x3810
+#define CS40L50_DCM_LOW_POWER		0x1
+#define CS40L50_OVERTEMP_WARN		0x4000010
+
+/* Interrupts */
+#define CS40L50_IRQ1_INT_1			0xE010
+#define CS40L50_IRQ1_MASK_1			0xE090
+#define CS40L50_IRQ1_MASK_2			0xE094
+#define CS40L50_IRQ1_MASK_20			0xE0DC
+#define CS40L50_IRQ_MASK_2_OVERRIDE	0xFFDF7FFF
+#define CS40L50_IRQ_MASK_20_OVERRIDE	0x15C01000
+#define CS40L50_IRQ1_INT_1_OFFSET	(4 * 0)
+#define CS40L50_IRQ1_INT_2_OFFSET	(4 * 1)
+#define CS40L50_IRQ1_INT_8_OFFSET	(4 * 7)
+#define CS40L50_IRQ1_INT_9_OFFSET	(4 * 8)
+#define CS40L50_IRQ1_INT_10_OFFSET	(4 * 9)
+#define CS40L50_IRQ1_INT_18_OFFSET	(4 * 17)
+#define CS40L50_GLOBAL_ERR_RLS_SET	BIT(11)
+#define CS40L50_GLOBAL_ERR_RLS_CLEAR	0
+#define CS40L50_AMP_SHORT_MASK		BIT(31)
+#define CS40L50_DSP_QUEUE_MASK		BIT(21)
+#define CS40L50_TEMP_ERR_MASK		BIT(31)
+#define CS40L50_BST_UVP_MASK		BIT(6)
+#define CS40L50_BST_SHORT_MASK		BIT(7)
+#define CS40L50_BST_ILIMIT_MASK		BIT(18)
+#define CS40L50_UVLO_VDDBATT_MASK	BIT(16)
+#define CS40L50_GLOBAL_ERROR_MASK	BIT(15)
+
+enum cs40l50_irq_list {
+	CS40L50_DSP_QUEUE_IRQ,
+	CS40L50_GLOBAL_ERROR_IRQ,
+	CS40L50_UVLO_VDDBATT_IRQ,
+	CS40L50_BST_ILIMIT_IRQ,
+	CS40L50_BST_SHORT_IRQ,
+	CS40L50_BST_UVP_IRQ,
+	CS40L50_TEMP_ERR_IRQ,
+	CS40L50_AMP_SHORT_IRQ,
+};
+
+/* DSP */
+#define CS40L50_XMEM_PACKED_0			0x2000000
+#define CS40L50_XMEM_UNPACKED24_0		0x2800000
+#define CS40L50_SYS_INFO_ID			0x25E0000
+#define CS40L50_RAM_INIT			0x28021DC
+#define CS40L50_DSP_QUEUE_WT			0x28042C8
+#define CS40L50_DSP_QUEUE_RD			0x28042CC
+#define CS40L50_POWER_ON_WSEQ			0x2804320
+#define CS40L50_NUM_WAVES			0x280CB4C
+#define CS40L50_CORE_BASE			0x2B80000
+#define CS40L50_CCM_CORE_CONTROL		0x2BC1000
+#define CS40L50_YMEM_PACKED_0			0x2C00000
+#define CS40L50_YMEM_UNPACKED24_0		0x3400000
+#define CS40L50_PMEM_0				0x3800000
+#define CS40L50_MEM_RDY_HW		0x2
+#define CS40L50_RAM_INIT_FLAG		0x1
+#define CS40L50_CLOCK_DISABLE		0x80
+#define CS40L50_CLOCK_ENABLE		0x281
+#define CS40L50_DSP_POLL_US		1000
+#define CS40L50_DSP_TIMEOUT_COUNT	100
+#define CS40L50_RESET_PULSE_US		2200
+#define CS40L50_CP_READY_US		3100
+#define CS40L50_AUTOSUSPEND_MS		2000
+#define CS40L50_PSEQ_SIZE		200
+
+/* DSP Commands */
+#define CS40L50_DSP_QUEUE_BASE		0x11004
+#define CS40L50_DSP_QUEUE_END		0x1101C
+#define CS40L50_DSP_QUEUE		0x11020
+#define CS40L50_PREVENT_HIBER	0x2000003
+#define CS40L50_ALLOW_HIBER	0x2000004
+#define CS40L50_START_I2S	0x3000002
+#define CS40L50_OWT_PUSH	0x3000008
+#define CS40L50_STOP_PLAYBACK	0x5000000
+#define CS40L50_OWT_DELETE	0xD000000
+
+/* Firmware files */
+#define CS40L50_FW	"cs40l50.wmfw"
+#define CS40L50_WT	"cs40l50.bin"
+
+/* Device */
+#define CS40L50_DEVID			0x0
+#define CS40L50_REVID			0x4
+#define CS40L50_DEVID_A		0x40A50
+#define CS40L50_REVID_B0	0xB0
+
+struct cs40l50 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock;
+	struct cs_dsp dsp;
+	struct gpio_desc *reset_gpio;
+	struct regmap_irq_chip_data *irq_data;
+	const struct firmware *patch;
+	const struct firmware *bin;
+	int irq;
+	u32 devid;
+	u32 revid;
+};
+
+int cs40l50_probe(struct cs40l50 *cs40l50);
+int cs40l50_remove(struct cs40l50 *cs40l50);
+
+extern const struct regmap_config cs40l50_regmap;
+extern const struct dev_pm_ops cs40l50_pm_ops;
+
+#endif /* __CS40L50_H__ */