diff mbox series

[v9] ASoc: tas2783: Add tas2783 codec driver

Message ID 20240222074000.659-1-shenghao-ding@ti.com (mailing list archive)
State Superseded
Headers show
Series [v9] ASoc: tas2783: Add tas2783 codec driver | expand

Commit Message

Shenghao Ding Feb. 22, 2024, 7:40 a.m. UTC
The tas2783 is a smart audio amplifier with integrated MIPI SoundWire
interface (Version 1.2.1 compliant), I2C, and I2S/TDM interfaces designed
for portable applications. An on-chip DSP supports Texas Instruments
SmartAmp speaker protection algorithm. The integrated speaker voltage and
current sense provides for real-time monitoring of lodspeakers.

The ASoC component provides the majority of the functionality of the
device, all the audio functions.

Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>

---
Change in v9:
 - simplify tasdevice_set_sdw_stream
 - fixed some Linux coding style
 - fixed the spelling mistakes
 - Select left/right channel based on unique id
 - a longer description has been added
 - remove unused crc8 in KCONFIG
 - Invert of RE here means reciprocal of RE
 - correct indentation
 - correct the wrong pow calibrated register
 - correct comment on RESET register
 - fixed usually lines don't end with an open parenthesis
 - fixed tasdevice_sdw_shutdown
 - use defines for function, entity, etc. for readable
 - remove unnecessary codec_lock in component_probe()
 - remove struct sdw_stream_data
 - remove unused macro definitions
 - use BIT(2) and BIT(1) instead of 0x2 and 0x1
 - implement pm_runtime
 - reg_start is u8, reg_start + i only adds i byte, it should be
   reg_start + i * 4, because the calibration values
 - fixed total_sz in tas2783_calibration
 - add a define for TASDEVICE_REG(0, 0, 0x0a)
 - rework macro style in header file
 - Add select CRC32
 - rewrite the mute and the return value handling
 - Add comments on bin file
 - Add link_id into the fw name to distinguish the same sdw id on different
   sdw id.
 - remove unnecessary mutex_lock
 - use set_active() in tasdevice_io_init and move all other parts in the
   probe.
 - move pm_runtime_get_noresume to the probe
 - fix the return value of putvol function
 - add put_noidle in tasdevice_sdw_remove
 - remove unused header file(of.h)
 - correct the style of the multi-line comment
 - Set the readable registers in tas2783_readable_register for debugfs
 - Use new PM macros
 - Use default put and get inline SOC_SINGLE_RANGE_TLV and
   SOC_SINGLE_SX_TLV
 - Use respective %pt to log the calibrated time
 - Remove unnecessary struct tm
 - Add trailing comma tasdevice_dapm_widgets and tasdevice_audio_map
 - Rewrite the return value handling in tasdevice_sdw_probe
 - use dev_num instead of id.unique_id
 - rework the log
 - Add code to check the size of calibrated data in UEFI
 - Add description of Layout of calibrated Data in UEFI
 - switch back link_id and unique_id to identify the devcie
 - unique_id offset as the device index of the calibrated data
---
 sound/soc/codecs/Kconfig       |  16 +
 sound/soc/codecs/Makefile      |   2 +
 sound/soc/codecs/tas2783-sdw.c | 851 +++++++++++++++++++++++++++++++++
 sound/soc/codecs/tas2783.h     | 106 ++++
 4 files changed, 975 insertions(+)
 create mode 100644 sound/soc/codecs/tas2783-sdw.c
 create mode 100644 sound/soc/codecs/tas2783.h

Comments

Pierre-Louis Bossart Feb. 23, 2024, 12:13 a.m. UTC | #1
On 2/22/24 2:40 AM, Shenghao Ding wrote:
> The tas2783 is a smart audio amplifier with integrated MIPI SoundWire
> interface (Version 1.2.1 compliant), I2C, and I2S/TDM interfaces designed
> for portable applications. An on-chip DSP supports Texas Instruments
> SmartAmp speaker protection algorithm. The integrated speaker voltage and
> current sense provides for real-time monitoring of lodspeakers.

loudspeakers.


> +static void tas2783_apply_calib(struct tasdevice_priv *tas_dev,
> +	unsigned int *cali_data)
> +{
> +	struct regmap *map = tas_dev->regmap;
> +	u8 *cali_start;
> +	u16 offset;
> +	int ret;
> +
> +	if (!tas_dev->sdw_peripheral) {
> +		dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n",
> +			__func__);
> +		return;
> +	}
> +
> +	offset = tas_dev->sdw_peripheral->id.unique_id -
> +		TAS2783_UNIQUE_ID_BASE;
> +	if (offset >= TAS2783_MAX_DEV_NUM) {
> +		dev_err(tas_dev->dev, "%s: offset(%u) is out of range.\n",
> +			 __func__, offset);
> +		return;
> +	}

I think we are at the 4th iteration where I have to repeat myself...

In the SoundWire spec, the unique_id is *LINK SPECIFIC*, and only used 
at the bus level within the context of a link to help avoid enumeration 
conflicts

If you are using the unique_id as a SYSTEM-UNIQUE value to lookup EFI 
data, this is a TI-specific requirement that needs to be documented. 
That also means you need to double-check for errors so make sure there 
are no board configurations where the same unique_id is used in multiple 
links, or by devices other than tas2783.
Shenghao Ding Feb. 23, 2024, 10:12 a.m. UTC | #2
Hi Pierre-Louis
Thanks for your careful review.

> -----Original Message-----
> From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> Sent: Friday, February 23, 2024 8:14 AM
> To: Ding, Shenghao <shenghao-ding@ti.com>; broonie@kernel.org
> Cc: andriy.shevchenko@linux.intel.com; lgirdwood@gmail.com;
> perex@perex.cz; 13916275206@139.com; alsa-devel@alsa-project.org;
> linux-kernel@vger.kernel.org; liam.r.girdwood@intel.com;
> bard.liao@intel.com; mengdong.lin@intel.com; yung-
> chuan.liao@linux.intel.com; Xu, Baojun <baojun.xu@ti.com>; Lu, Kevin
> <kevin-lu@ti.com>; tiwai@suse.de; soyer@irl.hu
> Subject: [EXTERNAL] Re: [PATCH v9] ASoc: tas2783: Add tas2783 codec driver
> 
> On 2/22/24 2: 40 AM, Shenghao Ding wrote: > The tas2783 is a smart audio
> amplifier with integrated MIPI SoundWire > interface (Version 1. 2. 1
> compliant), I2C, and I2S/TDM interfaces designed > for portable
> applications. An on-chip DSP ZjQcmQRYFpfptBannerStart This message was
> sent from outside of Texas Instruments.
> Do not click links or open attachments unless you recognize the source of
> this email and know the content is safe.
> 
> ZjQcmQRYFpfptBannerEnd
> On 2/22/24 2:40 AM, Shenghao Ding wrote:
> > The tas2783 is a smart audio amplifier with integrated MIPI SoundWire
> > interface (Version 1.2.1 compliant), I2C, and I2S/TDM interfaces
> > designed for portable applications. An on-chip DSP supports Texas
> > Instruments SmartAmp speaker protection algorithm. The integrated
> > speaker voltage and current sense provides for real-time monitoring of
> lodspeakers.
> 
> loudspeakers.
> 
> 
> > +static void tas2783_apply_calib(struct tasdevice_priv *tas_dev,
> > +	unsigned int *cali_data)
> > +{
> > +	struct regmap *map = tas_dev->regmap;
> > +	u8 *cali_start;
> > +	u16 offset;
> > +	int ret;
> > +
> > +	if (!tas_dev->sdw_peripheral) {
> > +		dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n",
> > +			__func__);
> > +		return;
> > +	}
> > +
> > +	offset = tas_dev->sdw_peripheral->id.unique_id -
> > +		TAS2783_UNIQUE_ID_BASE;
> > +	if (offset >= TAS2783_MAX_DEV_NUM) {
> > +		dev_err(tas_dev->dev, "%s: offset(%u) is out of range.\n",
> > +			 __func__, offset);
> > +		return;
> > +	}
> 
> I think we are at the 4th iteration where I have to repeat myself...
> 
> In the SoundWire spec, the unique_id is *LINK SPECIFIC*, and only used at
> the bus level within the context of a link to help avoid enumeration
> conflicts
> 
> If you are using the unique_id as a SYSTEM-UNIQUE value to lookup EFI
> data, this is a TI-specific requirement that needs to be documented.
> That also means you need to double-check for errors so make sure there
> are no board configurations where the same unique_id is used in multiple
> links, or by devices other than tas2783.
> 
> 
This code only covers the tas2783s sitting in the same bus link. As to cases of the
different SWD links, customer will be required to have the secondary development
on current code. I'm sure my customers have much knowledge to handle this.
Mark Brown Feb. 23, 2024, 5:20 p.m. UTC | #3
On Fri, Feb 23, 2024 at 10:12:49AM +0000, Ding, Shenghao wrote:
> Hi Pierre-Louis
> 
> > In the SoundWire spec, the unique_id is *LINK SPECIFIC*, and only used at
> > the bus level within the context of a link to help avoid enumeration
> > conflicts

> > If you are using the unique_id as a SYSTEM-UNIQUE value to lookup EFI
> > data, this is a TI-specific requirement that needs to be documented.
> > That also means you need to double-check for errors so make sure there
> > are no board configurations where the same unique_id is used in multiple
> > links, or by devices other than tas2783.

> This code only covers the tas2783s sitting in the same bus link. As to cases of the
> different SWD links, customer will be required to have the secondary development
> on current code. I'm sure my customers have much knowledge to handle this.

As Pierre says I think we really should have some sort of defensive
programming here, even if you're going to leave multi-link systems to
future work people will still have older versions in distributions or
whtaever.  While I'm not sure the consequences of getting things wrong
are likely to be that bad (I'm expecting bad quality audio) it's also
going to be kind of hard to figure out if we just silently pick the
wrong calibration, especially if it's actually a valid calibration for
another device in the system.  Other vendors (eg, Cirrus) seem to have
figured out a scheme here?
Pierre-Louis Bossart Feb. 26, 2024, 3:56 p.m. UTC | #4
On 2/23/24 12:20 PM, Mark Brown wrote:
> On Fri, Feb 23, 2024 at 10:12:49AM +0000, Ding, Shenghao wrote:
>> Hi Pierre-Louis
>>
>>> In the SoundWire spec, the unique_id is *LINK SPECIFIC*, and only used at
>>> the bus level within the context of a link to help avoid enumeration
>>> conflicts
> 
>>> If you are using the unique_id as a SYSTEM-UNIQUE value to lookup EFI
>>> data, this is a TI-specific requirement that needs to be documented.
>>> That also means you need to double-check for errors so make sure there
>>> are no board configurations where the same unique_id is used in multiple
>>> links, or by devices other than tas2783.
> 
>> This code only covers the tas2783s sitting in the same bus link. As to cases of the
>> different SWD links, customer will be required to have the secondary development
>> on current code. I'm sure my customers have much knowledge to handle this.

PC OEMs don't usually have a Linux team capable of handling this sort of 
low-level plumbing, so the burden of this "secondary development" will 
come back at you...

> As Pierre says I think we really should have some sort of defensive
> programming here, even if you're going to leave multi-link systems to
> future work people will still have older versions in distributions or
> whtaever.  While I'm not sure the consequences of getting things wrong
> are likely to be that bad (I'm expecting bad quality audio) it's also
> going to be kind of hard to figure out if we just silently pick the
> wrong calibration, especially if it's actually a valid calibration for
> another device in the system.  Other vendors (eg, Cirrus) seem to have
> figured out a scheme here?

Leaving multi-link aside has to be seen as as temporary step, there are 
a number of electrical issues that will prevent more than 4 amps to be 
placed on the same link. And indeed this "secondary development" has to 
be backwards compatible with initial calibration schemes.
Shenghao Ding Feb. 27, 2024, 2:52 a.m. UTC | #5
> -----Original Message-----
> From: Mark Brown <broonie@kernel.org>
> Sent: Saturday, February 24, 2024 1:20 AM
> To: Ding, Shenghao <shenghao-ding@ti.com>
> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>;
> andriy.shevchenko@linux.intel.com; lgirdwood@gmail.com; perex@perex.cz;
> 13916275206@139.com; alsa-devel@alsa-project.org; linux-
> kernel@vger.kernel.org; liam.r.girdwood@intel.com; bard.liao@intel.com;
> mengdong.lin@intel.com; yung-chuan.liao@linux.intel.com; Xu, Baojun
> <baojun.xu@ti.com>; Lu, Kevin <kevin-lu@ti.com>; tiwai@suse.de;
> soyer@irl.hu
> Subject: Re: [EXTERNAL] Re: [PATCH v9] ASoc: tas2783: Add tas2783 codec
> driver
> 
> On Fri, Feb 23, 2024 at 10:12:49AM +0000, Ding, Shenghao wrote:
> > Hi Pierre-Louis
> >
> > > In the SoundWire spec, the unique_id is *LINK SPECIFIC*, and only
> > > used at the bus level within the context of a link to help avoid
> > > enumeration conflicts
> 
> > > If you are using the unique_id as a SYSTEM-UNIQUE value to lookup
> > > EFI data, this is a TI-specific requirement that needs to be documented.
> > > That also means you need to double-check for errors so make sure
> > > there are no board configurations where the same unique_id is used
> > > in multiple links, or by devices other than tas2783.
> 
> > This code only covers the tas2783s sitting in the same bus link. As to
> > cases of the different SWD links, customer will be required to have
> > the secondary development on current code. I'm sure my customers have
> much knowledge to handle this.
> 
> As Pierre says I think we really should have some sort of defensive
> programming here, even if you're going to leave multi-link systems to future
> work people will still have older versions in distributions or whtaever.  While
> I'm not sure the consequences of getting things wrong are likely to be that
> bad (I'm expecting bad quality audio) it's also going to be kind of hard to
> figure out if we just silently pick the wrong calibration, especially if it's
> actually a valid calibration for another device in the system.  Other vendors
> (eg, Cirrus) seem to have figured out a scheme here?
Thanks for your comments, Mark & Pierre. I will discuss with my customers on 
how to find a compromise between new solution and current solution already 
released to market.
diff mbox series

Patch

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 59f9742e9ff4..6ba3fd0c0811 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -247,6 +247,7 @@  config SND_SOC_ALL_CODECS
 	imply SND_SOC_TAS2781_COMLIB
 	imply SND_SOC_TAS2781_FMWLIB
 	imply SND_SOC_TAS2781_I2C
+	imply SND_SOC_TAS2783
 	imply SND_SOC_TAS5086
 	imply SND_SOC_TAS571X
 	imply SND_SOC_TAS5720
@@ -1847,6 +1848,21 @@  config SND_SOC_TAS2781_I2C
 	  algo coefficient setting, for one, two or even multiple TAS2781
 	  chips.
 
+config SND_SOC_TAS2783
+	tristate "Texas Instruments TAS2783 speaker amplifier (sdw)"
+	depends on SOUNDWIRE
+	depends on EFI
+	select REGMAP
+	select REGMAP_SOUNDWIRE
+	select CRC32
+	select CRC32_SARWATE
+	help
+	  Enable support for Texas Instruments TAS2783 Smart Amplifier
+	  Digital input mono Class-D and DSP-inside audio power amplifiers.
+	  TAS2783 supports the MIPI SoundWire v1.2 compatible interface
+	  for audio and control data. At the end of calibrated data appends
+	  the crc data with crc32_sarwate for error detection.
+
 config SND_SOC_TAS5086
 	tristate "Texas Instruments TAS5086 speaker amplifier"
 	depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index f53baa2b9565..6afceb126ae3 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -284,6 +284,7 @@  snd-soc-tas2770-objs := tas2770.o
 snd-soc-tas2781-comlib-objs := tas2781-comlib.o
 snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o
 snd-soc-tas2781-i2c-objs := tas2781-i2c.o
+snd-soc-tas2783-objs := tas2783-sdw.o
 snd-soc-tfa9879-objs := tfa9879.o
 snd-soc-tfa989x-objs := tfa989x.o
 snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o
@@ -664,6 +665,7 @@  obj-$(CONFIG_SND_SOC_TAS2780)	+= snd-soc-tas2780.o
 obj-$(CONFIG_SND_SOC_TAS2781_COMLIB)	+= snd-soc-tas2781-comlib.o
 obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB)	+= snd-soc-tas2781-fmwlib.o
 obj-$(CONFIG_SND_SOC_TAS2781_I2C)	+= snd-soc-tas2781-i2c.o
+obj-$(CONFIG_SND_SOC_TAS2783)	+= snd-soc-tas2783.o
 obj-$(CONFIG_SND_SOC_TAS5086)	+= snd-soc-tas5086.o
 obj-$(CONFIG_SND_SOC_TAS571X)	+= snd-soc-tas571x.o
 obj-$(CONFIG_SND_SOC_TAS5720)	+= snd-soc-tas5720.o
diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c
new file mode 100644
index 000000000000..42a6f70dd108
--- /dev/null
+++ b/sound/soc/codecs/tas2783-sdw.c
@@ -0,0 +1,851 @@ 
+// SPDX-License-Identifier: GPL-2.0
+//
+// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier
+//
+// Copyright (C) 2023 - 2024 Texas Instruments Incorporated
+// https://www.ti.com
+//
+// Author: Baojun Xu <baojun.xu@ti.com>
+//	Kevin Lu <kevin-lu@ti.com>
+//	Shenghao Ding <shenghao-ding@ti.com>
+//
+
+#include <asm/unaligned.h>
+#include <linux/acpi.h>
+#include <linux/crc32.h>
+#include <linux/efi.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_registers.h>
+#include <linux/soundwire/sdw_type.h>
+#include <sound/pcm_params.h>
+#include <sound/sdw.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#include <sound/tas2781-tlv.h>
+#include "tas2783.h"
+
+static const unsigned int tas2783_cali_reg[] = {
+	TAS2783_CALIBRATION_RE,		/* Resistance */
+	TAS2783_CALIBRATION_RE_LOW,	/* Low limitation of RE */
+	TAS2783_CALIBRATION_INV_RE,	/* Reciprocal of RE */
+	TAS2783_CALIBRATION_POW,	/* RMS Power */
+	TAS2783_CALIBRATION_TLIMIT	/* Temperature limitation */
+};
+
+static const struct reg_default tas2783_reg_defaults[] = {
+	/* Default values for ROM mode. Activated. */
+	{ 0x8002, 0x1a },	/* AMP inactive. */
+	{ 0x8097, 0xc8 },
+	{ 0x80b5, 0x74 },
+	{ 0x8099, 0x20 },
+	{ 0xfe8d, 0x0d },
+	{ 0xfebe, 0x4a },
+	{ 0x8230, 0x00 },
+	{ 0x8231, 0x00 },
+	{ 0x8232, 0x00 },
+	{ 0x8233, 0x01 },
+	{ 0x8418, 0x00 },	/* Set volume to 0 dB. */
+	{ 0x8419, 0x00 },
+	{ 0x841a, 0x00 },
+	{ 0x841b, 0x00 },
+	{ 0x8428, 0x40 },	/* Unmute channel */
+	{ 0x8429, 0x00 },
+	{ 0x842a, 0x00 },
+	{ 0x842b, 0x00 },
+	{ 0x8548, 0x00 },	/* Set volume to 0 dB. */
+	{ 0x8549, 0x00 },
+	{ 0x854a, 0x00 },
+	{ 0x854b, 0x00 },
+	{ 0x8558, 0x40 },	/* Unmute channel */
+	{ 0x8559, 0x00 },
+	{ 0x855a, 0x00 },
+	{ 0x855b, 0x00 },
+	{ 0x800a, 0x3a },	/* Enable both channel */
+	{ 0x800e, 0x44 },
+	{ 0x800f, 0x40 },
+	{ 0x805c, 0x99 },
+	{ SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21,
+		TAS2783_SDCA_CTL_FU_MUTE, 0), 0 },
+	{ SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21,
+		TAS2783_SDCA_CTL_FU_VOLUME, 0), 0 },
+	{ SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU23,
+		TAS2783_SDCA_CTL_FU_MUTE, 0), 0 },
+};
+
+static bool tas2783_readable_register(struct device *dev,
+	unsigned int reg)
+{
+	switch (reg) {
+	case 0x8000 ... 0x807F:	/* Page 0 */
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool tas2783_volatile_register(struct device *dev,
+	unsigned int reg)
+{
+	switch (reg) {
+	/*
+	 * Only software reset register was volatiled.
+	 * Bit is self clearing.
+	 * 0b = Don't reset
+	 * 1b = reset
+	 */
+	case 0x8001:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config tasdevice_regmap = {
+	.reg_bits = 32,
+	.val_bits = 8,
+	.readable_reg = tas2783_readable_register,
+	.volatile_reg = tas2783_volatile_register,
+	.max_register = 0x44ffffff,
+	.reg_defaults = tas2783_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(tas2783_reg_defaults),
+	.cache_type = REGCACHE_RBTREE,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+static const struct snd_kcontrol_new tas2783_snd_controls[] = {
+	SOC_SINGLE_RANGE_TLV("Digital Volume", TAS2783_DVC_LVL,
+		0, 0, 200, 1, dvc_tlv),
+	SOC_SINGLE_SX_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL,
+		1, 0, 20, amp_vol_tlv),
+};
+
+static void tas2783_apply_calib(struct tasdevice_priv *tas_dev,
+	unsigned int *cali_data)
+{
+	struct regmap *map = tas_dev->regmap;
+	u8 *cali_start;
+	u16 offset;
+	int ret;
+
+	if (!tas_dev->sdw_peripheral) {
+		dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n",
+			__func__);
+		return;
+	}
+
+	offset = tas_dev->sdw_peripheral->id.unique_id -
+		TAS2783_UNIQUE_ID_BASE;
+	if (offset >= TAS2783_MAX_DEV_NUM) {
+		dev_err(tas_dev->dev, "%s: offset(%u) is out of range.\n",
+			 __func__, offset);
+		return;
+	}
+
+	/*
+	 * The area saving tas2783 calibrated data is specified by its
+	 * unique_id offset. cali_start is the first address of current
+	 * tas2783's calibrated data.
+	 */
+	cali_start = (u8 *)(cali_data + offset * sizeof(tas2783_cali_reg));
+	for (int i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) {
+		ret = regmap_bulk_write(map, tas2783_cali_reg[i],
+			&cali_start[4 * i], 4);
+		if (ret) {
+			dev_err(tas_dev->dev, "Cali failed %x:%d\n",
+				tas2783_cali_reg[i], ret);
+			break;
+		}
+	}
+}
+
+/*
+ * Load the calibration data, including speaker impedance, f0, etc.
+ * Calibration is done by the manufacturer in the factory. The calibration
+ * data are used by the algorithm for calculating the speaker temperature,
+ * speaker membrane excursion and f0 in real time during playback.
+ * The DSP will work with default data values if calibrated data are
+ * missing or are invalid.
+ * Layout of calibrated Data in UEFI:
+ *	Calibrated Data of Dev 0(unique_id offset 0) (20 bytes)
+ *	Calibrated Data of Dev 1(unique_id offset 1) (20 bytes)
+ *	Calibrated Data of Dev 2(unique_id offset 2) (20 bytes)
+ *	Calibrated Data of Dev 3(unique_id offset 3) (20 bytes)
+ *	Calibrated Data of Dev 4(unique_id offset 4) (20 bytes)
+ *	Calibrated Data of Dev 5(unique_id offset 5) (20 bytes)
+ *	Calibrated Data of Dev 6(unique_id offset 6) (20 bytes)
+ *	Calibrated Data of Dev 7(unique_id offset 7) (20 bytes)
+ *	TimeStamp of Calibration (4 bytes)
+ *	CRC (4 bytes)
+ *	Reserved (88 bytes)
+ */
+static void tas2783_calibration(struct tasdevice_priv *tas_dev)
+{
+	efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc,
+			0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
+	static efi_char16_t efi_name[] = L"CALI_DATA";
+	struct calibration_data cali_data;
+	unsigned int *tmp_val;
+	unsigned int crc;
+	efi_status_t status;
+
+	cali_data.total_sz = 0;
+
+	status = efi.get_variable(efi_name, &efi_guid, NULL,
+		&cali_data.total_sz, NULL);
+	if (status == EFI_BUFFER_TOO_SMALL
+		&& cali_data.total_sz < TAS2783_MAX_CALIDATA_SIZE) {
+		status = efi.get_variable(efi_name, &efi_guid, NULL,
+			&cali_data.total_sz,
+			cali_data.data);
+		dev_dbg(tas_dev->dev, "%s: cali get %lx bytes result:%ld\n",
+			__func__, cali_data.total_sz, status);
+	}
+	if (status != 0) {
+		/* Failed got calibration data from EFI. */
+		dev_dbg(tas_dev->dev, "No calibration data in UEFI.");
+		return;
+	}
+
+	tmp_val = (unsigned int *)cali_data.data;
+
+	/* 8 devs * 20 bytes calibrated data/dev + 4 bytes Timestamp */
+	crc = crc32(~0, cali_data.data, 164) ^ ~0;
+
+	if (crc == tmp_val[41]) {
+		/* Date and time of when calibration was done. */
+		tas2783_apply_calib(tas_dev, tmp_val);
+		dev_dbg(tas_dev->dev, "%ptTs", &tmp_val[40]);
+	} else {
+		dev_dbg(tas_dev->dev, "CRC 0x%08x not match 0x%08x\n",
+			crc, tmp_val[41]);
+	}
+}
+
+static void tasdevice_dspfw_ready(const struct firmware *fmw,
+	void *context)
+{
+	struct tasdevice_priv *tas_dev =
+		(struct tasdevice_priv *) context;
+	struct tas2783_firmware_node *p;
+	struct regmap *map = tas_dev->regmap;
+	unsigned char *buf = NULL;
+	int offset = 0, img_sz;
+	int ret;
+
+	if (!fmw || !fmw->data) {
+		dev_warn(tas_dev->dev,
+			"%s: failed to read %s: work in bypass-dsp mode.\n",
+			__func__, tas_dev->dspfw_binaryname);
+		return;
+	}
+	buf = (unsigned char *)fmw->data;
+
+	img_sz = get_unaligned_le32(&buf[offset]);
+	offset  += sizeof(img_sz);
+	if (img_sz != fmw->size) {
+		dev_warn(tas_dev->dev, "%s: size not matching, %d %u.",
+			__func__, (int)fmw->size, img_sz);
+		return;
+	}
+
+	while (offset < img_sz) {
+		p = (struct tas2783_firmware_node *)(buf + offset);
+		if (p->length > 1) {
+			ret = regmap_bulk_write(map, p->download_addr,
+			buf + offset + sizeof(unsigned int) * 5, p->length);
+		} else {
+			ret = regmap_write(map, p->download_addr,
+				*(buf + offset + sizeof(unsigned int) * 5));
+		}
+
+		if (ret != 0) {
+			dev_dbg(tas_dev->dev,
+				"%s: load FW fail: %d, work in bypass.\n",
+				__func__, ret);
+			return;
+		}
+		offset += sizeof(unsigned int) * 5 + p->length;
+	}
+
+	tas2783_calibration(tas_dev);
+}
+
+static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = {
+	SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_OUTPUT("OUT"),
+	SND_SOC_DAPM_INPUT("DMIC"),
+};
+
+static const struct snd_soc_dapm_route tasdevice_audio_map[] = {
+	{"OUT", NULL, "ASI"},
+	{"ASI OUT", NULL, "DMIC"},
+};
+
+static int tasdevice_set_sdw_stream(struct snd_soc_dai *dai,
+	void *sdw_stream, int direction)
+{
+	snd_soc_dai_dma_data_set(dai, direction, sdw_stream);
+
+	return 0;
+}
+
+static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	snd_soc_dai_set_dma_data(dai, substream, NULL);
+}
+
+static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct tasdevice_priv *tas_priv =
+		snd_soc_component_get_drvdata(component);
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
+	struct sdw_stream_runtime *sdw_stream;
+	int ret;
+
+	dev_dbg(dai->dev, "%s: dai_name %s", __func__, dai->name);
+	sdw_stream = snd_soc_dai_get_dma_data(dai, substream);
+
+	if (!sdw_stream)
+		return -EINVAL;
+
+	if (!tas_priv->sdw_peripheral)
+		return -EINVAL;
+
+	/* SoundWire specific configuration */
+	snd_sdw_params_to_config(substream, params,
+		&stream_config, &port_config);
+
+	/* port 1 for playback */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		port_config.num = 1;
+	else
+		port_config.num = 2;
+
+	ret = sdw_stream_add_slave(tas_priv->sdw_peripheral,
+		&stream_config, &port_config, 1, sdw_stream);
+	if (ret) {
+		dev_err(dai->dev, "%s: Unable to configure port\n", __func__);
+		return ret;
+	}
+
+	dev_dbg(dai->dev, "%s: format: %i rate: %i\n", __func__,
+		params_format(params), params_rate(params));
+
+	return 0;
+}
+
+static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct tasdevice_priv *tas_priv =
+		snd_soc_component_get_drvdata(component);
+	struct sdw_stream_runtime *sdw_stream =
+		snd_soc_dai_get_dma_data(dai, substream);
+
+	if (!tas_priv->sdw_peripheral)
+		return -EINVAL;
+
+	sdw_stream_remove_slave(tas_priv->sdw_peripheral, sdw_stream);
+
+	return 0;
+}
+
+static int tasdevice_mute(struct snd_soc_dai *dai, int mute,
+	int direction)
+{
+	struct snd_soc_component *component = dai->component;
+	struct tasdevice_priv *tas_dev =
+		snd_soc_component_get_drvdata(component);
+	struct regmap *map = tas_dev->regmap;
+	int ret;
+
+	dev_dbg(tas_dev->dev, "%s: %d.\n", __func__, mute);
+
+	if (mute) {
+		if (direction == SNDRV_PCM_STREAM_CAPTURE) {
+			ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL,
+				TAS2783_REG_AEF_MASK,
+				TAS2783_REG_AEF_INACTIVE);
+			if (ret)
+				dev_err(tas_dev->dev,
+					"%s: Disable AEF failed.\n", __func__);
+		} else {
+			/* FU23 mute (0x40400108) */
+			ret = regmap_write(map,
+				SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
+				TAS2783_SDCA_ENT_FU23,
+				TAS2783_SDCA_CTL_FU_MUTE, 0), 1);
+			if (ret) {
+				dev_err(tas_dev->dev,
+					"%s: FU23 mute failed.\n", __func__);
+				goto out;
+			}
+			/*
+			 * Both playback and echo data will be shutdown in
+			 * playback stream.
+			 */
+			ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL,
+				TAS2783_REG_PWR_MODE_MASK |
+				TAS2783_REG_AEF_MASK,
+				TAS2783_REG_PWR_MODE_ACTIVE |
+				TAS2783_REG_PWR_MODE_SW_PWD);
+			if (ret) {
+				dev_err(tas_dev->dev,
+					"%s: PWR&AEF shutdown failed.\n",
+					__func__);
+				goto out;
+			}
+			tas_dev->pstream = false;
+		}
+	} else {
+		/* FU23 Unmute, 0x40400108. */
+		if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
+			ret = regmap_write(map,
+				SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP,
+				TAS2783_SDCA_ENT_FU23,
+				TAS2783_SDCA_CTL_FU_MUTE, 0), 0);
+			if (ret) {
+				dev_err(tas_dev->dev,
+					"%s: FU23 Unmute failed.\n", __func__);
+				goto out;
+			}
+			ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL,
+				TAS2783_REG_PWR_MODE_MASK,
+				TAS2783_REG_PWR_MODE_ACTIVE);
+			if (ret) {
+				dev_err(tas_dev->dev,
+					"%s: PWR Unmute failed.\n", __func__);
+				goto out;
+			}
+			tas_dev->pstream = true;
+		} else {
+			/* Capture stream is the echo ref data for voice.
+			 * Without playback, it can't be active.
+			 */
+			if (tas_dev->pstream == true) {
+				ret = regmap_update_bits(map,
+					TAS2873_REG_PWR_CTRL,
+					TAS2783_REG_AEF_MASK,
+					TAS2783_REG_AEF_ACTIVE);
+				if (ret) {
+					dev_err(tas_dev->dev,
+						"%s: AEF enable failed.\n",
+						__func__);
+					goto out;
+				}
+			} else {
+				dev_err(tas_dev->dev,
+					"%s: No playback, no AEF!", __func__);
+				ret = -EINVAL;
+			}
+		}
+	}
+out:
+	if (ret)
+		dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n",
+			mute, ret);
+
+	return ret;
+}
+
+static const struct snd_soc_dai_ops tasdevice_dai_ops = {
+	.mute_stream	= tasdevice_mute,
+	.hw_params	= tasdevice_sdw_hw_params,
+	.hw_free	= tasdevice_sdw_pcm_hw_free,
+	.set_stream	= tasdevice_set_sdw_stream,
+	.shutdown	= tasdevice_sdw_shutdown,
+};
+
+static struct snd_soc_dai_driver tasdevice_dai_driver[] = {
+	{
+		.name = "tas2783-codec",
+		.id = 0,
+		.playback = {
+			.stream_name	= "Playback",
+			.channels_min	= 1,
+			.channels_max	= 4,
+			.rates		= TAS2783_DEVICE_RATES,
+			.formats	= TAS2783_DEVICE_FORMATS,
+		},
+		.capture = {
+			.stream_name	= "Capture",
+			.channels_min	= 1,
+			.channels_max	= 4,
+			.rates		= TAS2783_DEVICE_RATES,
+			.formats	= TAS2783_DEVICE_FORMATS,
+		},
+		.ops = &tasdevice_dai_ops,
+		.symmetric_rate = 1,
+	},
+};
+
+static int tasdevice_comp_probe(struct snd_soc_component *comp)
+{
+	struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(comp);
+	acpi_handle handle = ACPI_HANDLE(tas_dev->dev);
+	const struct firmware *fw_entry = NULL;
+	const char *sub = NULL;
+	int ret;
+
+	if (handle) {
+		sub = acpi_get_subsystem_id(handle);
+		if (IS_ERR(sub))
+			sub = NULL;
+	}
+
+	tas_dev->component = comp;
+
+	/*
+	 * Each tas2783 in the system has its own dspfw.
+	 */
+	if (comp->name_prefix) {
+		/*
+		 * name_prefix.bin stores the dsp firmware including speaker
+		 * protection algorithm, audio acoustic algorithm, speaker
+		 * characters and algorithm params, it must be copied into
+		 * firmware folder.
+		 */
+		scnprintf(tas_dev->dspfw_binaryname,
+			TAS2783_DSPFW_FILENAME_LEN, "%s-tas2783.bin",
+			comp->name_prefix);
+	} else {
+		/* Compatible with the previous naming rule */
+		if (sub) {
+			/*
+			 * subsys_id-link_id[0,1,...,N]-unique_id[1,...,4].bin
+			 * stores the dsp firmware including speaker protection
+			 * algorithm, audio acoustic algorithm, speaker
+			 * characters and algorithm params, it must be copied
+			 * into firmware folder.
+			 */
+			scnprintf(tas_dev->dspfw_binaryname,
+				TAS2783_DSPFW_FILENAME_LEN,
+				"%s-%d-%d.bin", sub,
+				tas_dev->sdw_peripheral->bus->link_id,
+				tas_dev->sdw_peripheral->id.unique_id);
+		} else {
+			/*
+			 * tas2783-link_id[0,1,...,N]-unique_id[1,...,4].bin
+			 * stores the dsp firmware including speaker protection
+			 * algorithm, audio acoustic algorithm, speaker
+			 * characters and algorithm params, it must be copied
+			 * into firmware folder.
+			 */
+			scnprintf(tas_dev->dspfw_binaryname,
+				TAS2783_DSPFW_FILENAME_LEN,
+				"tas2783-%d-%d.bin",
+				tas_dev->sdw_peripheral->bus->link_id,
+				tas_dev->sdw_peripheral->id.unique_id);
+		}
+	}
+
+	ret = request_firmware(&fw_entry, tas_dev->dspfw_binaryname,
+		tas_dev->dev);
+	if (ret) {
+		dev_err(tas_dev->dev,
+			"%s: request_firmware %x open status: %d.\n", __func__,
+			tas_dev->sdw_peripheral->id.unique_id, ret);
+		goto out;
+	}
+
+	tasdevice_dspfw_ready(fw_entry, tas_dev);
+
+out:
+	if (fw_entry)
+		release_firmware(fw_entry);
+	return 0;
+}
+
+static const struct snd_soc_component_driver
+	soc_codec_driver_tasdevice = {
+	.probe		= tasdevice_comp_probe,
+	.controls	= tas2783_snd_controls,
+	.num_controls	= ARRAY_SIZE(tas2783_snd_controls),
+	.dapm_widgets	= tasdevice_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets),
+	.dapm_routes	= tasdevice_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map),
+	.idle_bias_on	= 1,
+	.endianness	= 1,
+};
+
+static int tasdevice_init(struct tasdevice_priv *tas_dev)
+{
+	int ret;
+
+	dev_set_drvdata(tas_dev->dev, tas_dev);
+
+	ret = devm_snd_soc_register_component(tas_dev->dev,
+		&soc_codec_driver_tasdevice,
+		tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver));
+	if (ret) {
+		dev_err(tas_dev->dev, "%s: codec register error:%d.\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* set autosuspend parameters */
+	pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000);
+	pm_runtime_use_autosuspend(tas_dev->dev);
+
+	/* make sure the device does not suspend immediately */
+	pm_runtime_mark_last_busy(tas_dev->dev);
+	pm_runtime_enable(tas_dev->dev);
+
+	return 0;
+}
+
+static int tasdevice_read_prop(struct sdw_slave *slave)
+{
+	struct sdw_slave_prop *prop = &slave->prop;
+	struct sdw_dpn_prop *dpn;
+	unsigned long addr;
+	int nval, i, j;
+	u32 bit;
+
+	prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+	prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
+
+	prop->paging_support = true;
+
+	/* first we need to allocate memory for set bits in port lists */
+	prop->source_ports = BIT(2); /* BITMAP: 00000100 */
+	prop->sink_ports = BIT(1); /* BITMAP:  00000010 */
+
+	nval = hweight32(prop->source_ports);
+	prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
+		sizeof(*prop->src_dpn_prop), GFP_KERNEL);
+	if (!prop->src_dpn_prop)
+		return -ENOMEM;
+
+	i = 0;
+	dpn = prop->src_dpn_prop;
+	addr = prop->source_ports;
+	for_each_set_bit(bit, &addr, 32) {
+		dpn[i].num = bit;
+		dpn[i].type = SDW_DPN_FULL;
+		dpn[i].simple_ch_prep_sm = true;
+		dpn[i].ch_prep_timeout = 10;
+		i++;
+	}
+
+	/* do this again for sink now */
+	nval = hweight32(prop->sink_ports);
+	prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
+		sizeof(*prop->sink_dpn_prop), GFP_KERNEL);
+	if (!prop->sink_dpn_prop)
+		return -ENOMEM;
+
+	j = 0;
+	dpn = prop->sink_dpn_prop;
+	addr = prop->sink_ports;
+	for_each_set_bit(bit, &addr, 32) {
+		dpn[j].num = bit;
+		dpn[j].type = SDW_DPN_FULL;
+		dpn[j].simple_ch_prep_sm = true;
+		dpn[j].ch_prep_timeout = 10;
+		j++;
+	}
+
+	/* set the timeout values */
+	prop->clk_stop_timeout = 20;
+
+	return 0;
+}
+
+static int tasdevice_io_init(struct device *dev,
+	struct sdw_slave *slave)
+{
+	struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
+	int ret;
+
+	regcache_cache_only(tas_priv->regmap, false);
+
+	if (tas_priv->first_hw_init) {
+		regcache_cache_bypass(tas_priv->regmap, true);
+	} else {
+		/*
+		 * PM runtime is only enabled when a Slave reports as Attached
+		 * Update count of parent 'active' children.
+		 */
+		pm_runtime_set_active(&slave->dev);
+	}
+
+	/* sw reset */
+	ret = regmap_write(tas_priv->regmap, TAS2873_REG_SWRESET,
+		TAS2873_REG_SWRESET_RESET);
+	if (ret) {
+		dev_err(tas_priv->dev, "Reset failed.\n");
+		goto out;
+	}
+
+	if (tas_priv->first_hw_init) {
+		regcache_cache_bypass(tas_priv->regmap, false);
+		regcache_mark_dirty(tas_priv->regmap);
+	}
+
+	tas_priv->first_hw_init = true;
+	tas_priv->hw_init = true;
+
+out:
+	return ret;
+}
+
+static int tasdevice_update_status(struct sdw_slave *slave,
+	enum sdw_slave_status status)
+{
+	struct  tasdevice_priv *tas_priv = dev_get_drvdata(&slave->dev);
+
+	/* Update the status */
+	tas_priv->status = status;
+
+	if (status == SDW_SLAVE_UNATTACHED)
+		tas_priv->hw_init = false;
+	/*
+	 * Perform initialization only if slave status
+	 * is present and hw_init flag is false
+	 */
+	if (tas_priv->hw_init || tas_priv->status != SDW_SLAVE_ATTACHED)
+		return 0;
+
+	/* perform I/O transfers required for Slave initialization */
+	return tasdevice_io_init(&slave->dev, slave);
+}
+
+/*
+ * slave_ops: callbacks for get_clock_stop_mode, clock_stop and
+ * port_prep are not defined for now
+ */
+static const struct sdw_slave_ops tasdevice_sdw_ops = {
+	.read_prop	= tasdevice_read_prop,
+	.update_status	= tasdevice_update_status,
+};
+
+static int tasdevice_sdw_probe(struct sdw_slave *peripheral,
+	const struct sdw_device_id *id)
+{
+	struct device *dev = &peripheral->dev;
+	struct tasdevice_priv *tas_dev;
+
+	tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL);
+	if (!tas_dev)
+		return -ENOMEM;
+
+	tas_dev->dev = dev;
+	tas_dev->chip_id = id->driver_data;
+	tas_dev->sdw_peripheral = peripheral;
+	/*
+	 * Mark hw_init to false
+	 * HW init will be performed when device reports present
+	 */
+	tas_dev->hw_init = false;
+	tas_dev->first_hw_init = false;
+
+	dev_set_drvdata(dev, tas_dev);
+
+	tas_dev->regmap = devm_regmap_init_sdw(peripheral, &tasdevice_regmap);
+	if (IS_ERR(tas_dev->regmap))
+		return dev_err_probe(dev, PTR_ERR(tas_dev->regmap),
+			"Failed devm_regmap_init_sdw.");
+
+	return tasdevice_init(tas_dev);
+}
+
+static int tasdevice_sdw_remove(struct sdw_slave *peripheral)
+{
+	struct tasdevice_priv *tas_dev = dev_get_drvdata(&peripheral->dev);
+
+	if (tas_dev->first_hw_init)
+		pm_runtime_disable(tas_dev->dev);
+
+	return 0;
+}
+
+static const struct sdw_device_id tasdevice_sdw_id[] = {
+	SDW_SLAVE_ENTRY(0x0102, 0x0000, 0),
+	{}
+};
+MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id);
+
+static int __maybe_unused tas2783_sdca_dev_suspend(struct device *dev)
+{
+	struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
+
+	if (!tas_priv->hw_init)
+		return 0;
+
+	regcache_cache_only(tas_priv->regmap, true);
+
+	return 0;
+}
+
+#define TAS2783_PROBE_TIMEOUT_MS 5000
+
+static int __maybe_unused tas2783_sdca_dev_resume(struct device *dev)
+{
+	struct sdw_slave *slave = dev_to_sdw_dev(dev);
+	struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
+	unsigned long time;
+
+	if (!tas_priv->first_hw_init)
+		return 0;
+
+	if (!slave->unattach_request)
+		goto regmap_sync;
+
+	time = wait_for_completion_timeout(&slave->initialization_complete,
+		msecs_to_jiffies(TAS2783_PROBE_TIMEOUT_MS));
+	if (!time) {
+		dev_err(&slave->dev, "Init not complete, timed out\n");
+		sdw_show_ping_status(slave->bus, true);
+
+		return -ETIMEDOUT;
+	}
+
+regmap_sync:
+	slave->unattach_request = 0;
+	regcache_cache_only(tas_priv->regmap, false);
+	regcache_sync(tas_priv->regmap);
+
+	return 0;
+}
+
+static const struct dev_pm_ops tas2783_sdca_pm = {
+	SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_suspend,
+		tas2783_sdca_dev_resume)
+	RUNTIME_PM_OPS(tas2783_sdca_dev_suspend,
+		tas2783_sdca_dev_resume, NULL)
+};
+
+static struct sdw_driver tasdevice_sdw_driver = {
+	.driver = {
+		.name = "slave-tas2783",
+		.pm = &tas2783_sdca_pm,
+	},
+	.probe = tasdevice_sdw_probe,
+	.remove = tasdevice_sdw_remove,
+	.ops = &tasdevice_sdw_ops,
+	.id_table = tasdevice_sdw_id,
+};
+
+module_sdw_driver(tasdevice_sdw_driver);
+
+MODULE_AUTHOR("Baojun Xu <baojun.xu@ti.com>");
+MODULE_AUTHOR("Shenghao Ding <shenghao-ding@ti.com>");
+MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h
new file mode 100644
index 000000000000..631776dcec4c
--- /dev/null
+++ b/sound/soc/codecs/tas2783.h
@@ -0,0 +1,106 @@ 
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier
+ *
+ * Copyright (C) 2023 - 2024 Texas Instruments Incorporated
+ * https://www.ti.com
+ *
+ * Author: Baojun Xu <baojun.xu@ti.com>
+ *	Shenghao Ding <shenghao-ding@ti.com>
+ */
+
+#ifndef __TAS2783_H__
+#define __TAS2783_H__
+
+/* Unique id start */
+#define TAS2783_UNIQUE_ID_BASE		0x08
+#define TAS2783_MAX_DEV_NUM		8
+
+#define TAS2783_DEVICE_RATES		(SNDRV_PCM_RATE_44100 | \
+					SNDRV_PCM_RATE_48000 | \
+					SNDRV_PCM_RATE_96000 | \
+					SNDRV_PCM_RATE_88200)
+
+#define TAS2783_DEVICE_FORMATS		(SNDRV_PCM_FMTBIT_S16_LE | \
+					SNDRV_PCM_FMTBIT_S24_LE | \
+					SNDRV_PCM_FMTBIT_S32_LE)
+
+/* BOOK, PAGE Control Register */
+#define TASDEVICE_REG(book, page, reg)	((book * 256 * 256) + 0x8000 + \
+					(page * 128) + reg)
+
+/*Software Reset */
+#define TAS2873_REG_SWRESET		TASDEVICE_REG(0x0, 0x00, 0x01)
+#define TAS2873_REG_SWRESET_MASK	BIT(0)
+#define TAS2873_REG_SWRESET_RESET	BIT(0)
+
+#define TAS2873_REG_PWR_CTRL		TASDEVICE_REG(0x0, 0x00, 0x02)
+#define TAS2783_REG_AEF_MASK		GENMASK(4, 3)
+#define TAS2783_REG_AEF_ACTIVE		0
+#define TAS2783_REG_AEF_INACTIVE	GENMASK(4, 3)
+#define TAS2783_REG_PWR_MODE_MASK	GENMASK(2, 0)
+#define TAS2783_REG_PWR_MODE_ACTIVE	0
+#define TAS2783_REG_PWR_MODE_SW_PWD	BIT(1)
+
+#define TAS2783_REG_TDM_RX_CFG		TASDEVICE_REG(0x0, 0x00, 0x0a)
+
+/* Volume control */
+#define TAS2783_DVC_LVL			TASDEVICE_REG(0x0, 0x00, 0x1a)
+#define TAS2783_AMP_LEVEL		TASDEVICE_REG(0x0, 0x00, 0x03)
+#define TAS2783_AMP_LEVEL_MASK		GENMASK(5, 1)
+
+/* Calibration data */
+#define TAS2783_CALIBRATION_RE		TASDEVICE_REG(0x0, 0x17, 0x74)
+#define TAS2783_CALIBRATION_RE_LOW	TASDEVICE_REG(0x0, 0x18, 0x14)
+#define TAS2783_CALIBRATION_INV_RE	TASDEVICE_REG(0x0, 0x18, 0x0c)
+#define TAS2783_CALIBRATION_POW		TASDEVICE_REG(0x0, 0x13, 0x70)
+#define TAS2783_CALIBRATION_TLIMIT	TASDEVICE_REG(0x0, 0x18, 0x7c)
+
+/* TAS2783 SDCA Control - function number */
+#define TAS2783_FUNC_TYPE_SMART_AMP	0x01
+
+/* TAS2783 SDCA entity */
+#define TAS2783_SDCA_ENT_FU21		0x01
+#define TAS2783_SDCA_ENT_FU23		0x02
+
+/* TAS2783 SDCA control */
+#define TAS2783_SDCA_CTL_REQ_POWER_STATE	0x01
+#define TAS2783_SDCA_CTL_FU_MUTE	0x01
+#define TAS2783_SDCA_CTL_FU_VOLUME	0x02
+#define TAS2783_SDCA_CTL_UDMPU_CLUSTER	0x10
+
+#define TAS2783_DEVICE_CHANNEL_LEFT	1
+#define TAS2783_DEVICE_CHANNEL_RIGHT	2
+#define TAS2783_DSPFW_FILENAME_LEN	64
+
+#define TAS2783_MAX_CALIDATA_SIZE	256
+
+struct tas2783_firmware_node {
+	unsigned int vendor_id;
+	unsigned int file_id;
+	unsigned int version_id;
+	unsigned int length;
+	unsigned int download_addr;
+};
+
+struct calibration_data {
+	unsigned long total_sz;
+	unsigned char data[TAS2783_MAX_CALIDATA_SIZE];
+};
+
+struct tasdevice_priv {
+	struct snd_soc_component *component;
+	struct sdw_slave *sdw_peripheral;
+	enum sdw_slave_status status;
+	struct sdw_bus_params params;
+	struct regmap *regmap;
+	struct device *dev;
+	unsigned char dspfw_binaryname[TAS2783_DSPFW_FILENAME_LEN];
+	unsigned char dev_name[32];
+	unsigned int chip_id;
+	bool pstream;
+	bool hw_init;
+	bool first_hw_init;
+};
+
+#endif /*__TAS2783_H__ */