diff mbox series

[2/2] ASoC: dt-bindings: rt5645: add cbj sleeve gpio property

Message ID 20240408091057.14165-2-derek.fang@realtek.com (mailing list archive)
State Accepted
Commit 306b38e3fa727d22454a148a364123709e356600
Headers show
Series [1/2] ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating | expand

Commit Message

Derek [方德義] April 8, 2024, 9:10 a.m. UTC
From: Derek Fang <derek.fang@realtek.com>

Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.

Signed-off-by: Derek Fang <derek.fang@realtek.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt
index 41a62fd2ae1f..c1fa379f5f3e 100644
--- a/Documentation/devicetree/bindings/sound/rt5645.txt
+++ b/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@  Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@  codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";