@@ -102,7 +102,7 @@ static const struct reg_sequence cs35l41_hda_config_dsp[] = {
{ CS35L41_SP_HIZ_CTRL, 0x00000003 }, // Hi-Z unused/disabled
{ CS35L41_SP_TX_WL, 0x00000018 }, // 24 cycles/slot
{ CS35L41_SP_RX_WL, 0x00000018 }, // 24 cycles/slot
- { CS35L41_DAC_PCM1_SRC, 0x00000032 }, // DACPCM1_SRC = ERR_VOL
+ { CS35L41_DAC_PCM1_SRC, 0x00000032 }, // DACPCM1_SRC = DSP1TX1
{ CS35L41_ASP_TX1_SRC, 0x00000018 }, // ASPTX1 SRC = VMON
{ CS35L41_ASP_TX2_SRC, 0x00000019 }, // ASPTX2 SRC = IMON
{ CS35L41_ASP_TX3_SRC, 0x00000028 }, // ASPTX3 SRC = VPMON
@@ -111,7 +111,7 @@ static const struct reg_sequence cs35l41_hda_config_dsp[] = {
{ CS35L41_DSP1_RX2_SRC, 0x00000008 }, // DSP1RX2 SRC = ASPRX1
{ CS35L41_DSP1_RX3_SRC, 0x00000018 }, // DSP1RX3 SRC = VMON
{ CS35L41_DSP1_RX4_SRC, 0x00000019 }, // DSP1RX4 SRC = IMON
- { CS35L41_DSP1_RX5_SRC, 0x00000029 }, // DSP1RX5 SRC = VBSTMON
+ { CS35L41_DSP1_RX6_SRC, 0x00000029 }, // DSP1RX6 SRC = VBSTMON
};
static const struct reg_sequence cs35l41_hda_unmute[] = {
@@ -693,6 +693,10 @@ static void cs35l41_hda_play_start(struct device *dev)
if (cs35l41->cs_dsp.running) {
regmap_multi_reg_write(reg, cs35l41_hda_config_dsp,
ARRAY_SIZE(cs35l41_hda_config_dsp));
+ if (cs35l41->hw_cfg.bst_type == CS35L41_INT_BOOST)
+ regmap_write(reg, CS35L41_DSP1_RX5_SRC, CS35L41_INPUT_SRC_VPMON);
+ else
+ regmap_write(reg, CS35L41_DSP1_RX5_SRC, CS35L41_INPUT_SRC_VBSTMON);
regmap_update_bits(reg, CS35L41_PWR_CTRL2,
CS35L41_VMON_EN_MASK | CS35L41_IMON_EN_MASK,
1 << CS35L41_VMON_EN_SHIFT | 1 << CS35L41_IMON_EN_SHIFT);
Currently, all PC systems are set to use VBSTMON for DSP1RX5_SRC, however, this is required only for external boost systems. Internal boost systems require VPMON instead of VBSTMON to be the input to DSP1RX5_SRC. All systems require DSP1RX6_SRC to be set to VBSTMON. Also fix incorrect comment for DACPCM1_SRC to use DSP1TX1. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> --- sound/pci/hda/cs35l41_hda.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)