@@ -737,6 +737,12 @@ static void snd_emu1010_load_dock_firmware(struct snd_emu10k1 *emu)
u32 tmp, tmp2;
int err;
+ // The docking events clearly arrive prematurely - while the
+ // Dock's FPGA seems to be successfully programmed, the Dock
+ // fails to initialize subsequently if we don't give it some
+ // time to "warm up" here.
+ msleep(200);
+
dev_info(emu->card->dev, "emu1010: Loading Audio Dock Firmware\n");
/* Return to Audio Dock programming mode */
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG,
A side effect of making the dock monitoring interrupt-driven was that we'd be very quick to program a freshly connected dock. However, for unclear reasons, the dock does not work when we do that - despite the FPGA netlist upload going just fine. We work around this by adding a delay before programming the dock; for safety, the value is several times as much as was determined empirically. Note that a badly timed dock hot-plug would have triggered the problem even before the referenced commit - but now it would happen 100% instead of about 3% of the time, thus making it impossible to work around by re-plugging. Fixes: fbb64eedf5a3 (ALSA: emu10k1: make E-MU dock monitoring interrupt-driven) Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584 Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> --- sound/pci/emu10k1/emu10k1_main.c | 6 ++++++ 1 file changed, 6 insertions(+)