diff mbox series

ALSA: hda: cs35l56: Perform firmware download in the background

Message ID 20240501111755.21231-1-simont@opensource.cirrus.com (mailing list archive)
State New, archived
Headers show
Series ALSA: hda: cs35l56: Perform firmware download in the background | expand

Commit Message

Simon Trimmer May 1, 2024, 11:17 a.m. UTC
It is possible that during system boot when there multiple devices
attempting simultaneous initialization on a slow control bus the
download of firmware and tuning data may take a user perceivable amount
of time.

Adopt a pattern used in the ASoC driver and perform this activity in a
background thread so that interactive performance is not impaired.

Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
---
 sound/pci/hda/cs35l56_hda.c | 89 ++++++++++++++++++++++++++++++-------
 sound/pci/hda/cs35l56_hda.h |  4 ++
 2 files changed, 76 insertions(+), 17 deletions(-)

Comments

Takashi Iwai May 2, 2024, 7:34 a.m. UTC | #1
On Wed, 01 May 2024 13:17:55 +0200,
Simon Trimmer wrote:
> @@ -964,6 +1011,14 @@ int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int hid, int id)
>  	mutex_init(&cs35l56->base.irq_lock);
>  	dev_set_drvdata(cs35l56->base.dev, cs35l56);
>  
> +	cs35l56->dsp_wq = create_singlethread_workqueue("cs35l56-dsp");
> +	if (!cs35l56->dsp_wq) {
> +		ret = -ENOMEM;
> +		goto err;
> +	}

Do we really need a dedicated workqueue?  In most usages, simple
schedule_work*() works fine and is recommended.


thanks,

Takashi
Richard Fitzgerald May 2, 2024, 9:21 a.m. UTC | #2
On 02/05/2024 08:34, Takashi Iwai wrote:
> On Wed, 01 May 2024 13:17:55 +0200,
> Simon Trimmer wrote:
>> @@ -964,6 +1011,14 @@ int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int hid, int id)
>>   	mutex_init(&cs35l56->base.irq_lock);
>>   	dev_set_drvdata(cs35l56->base.dev, cs35l56);
>>   
>> +	cs35l56->dsp_wq = create_singlethread_workqueue("cs35l56-dsp");
>> +	if (!cs35l56->dsp_wq) {
>> +		ret = -ENOMEM;
>> +		goto err;
>> +	}
> 
> Do we really need a dedicated workqueue?  In most usages, simple
> schedule_work*() works fine and is recommended.
> 

On a slow I2C bus with 4 amps this work could take over 2 seconds.
That seems too long to be blocking a global system queue. We use a
dedicated queue in the ASoC driver.

Also if we queue work on an ordered (single-threaded) system queue the
firmware won't be downloaded to multiple amps in parallel, so we don't
get the best use of the available bus bandwidth.

> 
> thanks,
> 
> Takashi
Takashi Iwai May 2, 2024, 9:52 a.m. UTC | #3
On Thu, 02 May 2024 11:21:36 +0200,
Richard Fitzgerald wrote:
> 
> On 02/05/2024 08:34, Takashi Iwai wrote:
> > On Wed, 01 May 2024 13:17:55 +0200,
> > Simon Trimmer wrote:
> >> @@ -964,6 +1011,14 @@ int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int hid, int id)
> >>   	mutex_init(&cs35l56->base.irq_lock);
> >>   	dev_set_drvdata(cs35l56->base.dev, cs35l56);
> >>   +	cs35l56->dsp_wq =
> >> create_singlethread_workqueue("cs35l56-dsp");
> >> +	if (!cs35l56->dsp_wq) {
> >> +		ret = -ENOMEM;
> >> +		goto err;
> >> +	}
> > 
> > Do we really need a dedicated workqueue?  In most usages, simple
> > schedule_work*() works fine and is recommended.
> > 
> 
> On a slow I2C bus with 4 amps this work could take over 2 seconds.
> That seems too long to be blocking a global system queue. We use a
> dedicated queue in the ASoC driver.
> 
> Also if we queue work on an ordered (single-threaded) system queue the
> firmware won't be downloaded to multiple amps in parallel, so we don't
> get the best use of the available bus bandwidth.

OK, that sounds like a sensible argument.

But the patch has no call of a queue destructor.  Won't it leak
resources?


thanks,

Takashi
Simon Trimmer May 2, 2024, 10:17 a.m. UTC | #4
> -----Original Message-----
> From: Takashi Iwai <tiwai@suse.de>
> Sent: Thursday, May 2, 2024 10:53 AM
> To: Richard Fitzgerald <rf@opensource.cirrus.com>
> Cc: Simon Trimmer <simont@opensource.cirrus.com>; tiwai@suse.com; linux-
> sound@vger.kernel.org; alsa-devel@alsa-project.org; linux-
> kernel@vger.kernel.org; patches@opensource.cirrus.com
> Subject: Re: [PATCH] ALSA: hda: cs35l56: Perform firmware download in the
> background
> 
> On Thu, 02 May 2024 11:21:36 +0200,
> Richard Fitzgerald wrote:
> >
> > On 02/05/2024 08:34, Takashi Iwai wrote:
> > > On Wed, 01 May 2024 13:17:55 +0200,
> > > Simon Trimmer wrote:
> > >> @@ -964,6 +1011,14 @@ int cs35l56_hda_common_probe(struct
> cs35l56_hda *cs35l56, int hid, int id)
> > >>   	mutex_init(&cs35l56->base.irq_lock);
> > >>   	dev_set_drvdata(cs35l56->base.dev, cs35l56);
> > >>   +	cs35l56->dsp_wq =
> > >> create_singlethread_workqueue("cs35l56-dsp");
> > >> +	if (!cs35l56->dsp_wq) {
> > >> +		ret = -ENOMEM;
> > >> +		goto err;
> > >> +	}
> > >
> > > Do we really need a dedicated workqueue?  In most usages, simple
> > > schedule_work*() works fine and is recommended.
> > >
> >
> > On a slow I2C bus with 4 amps this work could take over 2 seconds.
> > That seems too long to be blocking a global system queue. We use a
> > dedicated queue in the ASoC driver.
> >
> > Also if we queue work on an ordered (single-threaded) system queue the
> > firmware won't be downloaded to multiple amps in parallel, so we don't
> > get the best use of the available bus bandwidth.
> 
> OK, that sounds like a sensible argument.
> 
> But the patch has no call of a queue destructor.  Won't it leak
> resources?

Oops that's a good spot - I missed that and will send a v2

Cheers,
-Simon
Takashi Iwai May 2, 2024, 10:25 a.m. UTC | #5
On Thu, 02 May 2024 12:17:48 +0200,
Simon Trimmer wrote:
> 
> > -----Original Message-----
> > From: Takashi Iwai <tiwai@suse.de>
> > Sent: Thursday, May 2, 2024 10:53 AM
> > To: Richard Fitzgerald <rf@opensource.cirrus.com>
> > Cc: Simon Trimmer <simont@opensource.cirrus.com>; tiwai@suse.com; linux-
> > sound@vger.kernel.org; alsa-devel@alsa-project.org; linux-
> > kernel@vger.kernel.org; patches@opensource.cirrus.com
> > Subject: Re: [PATCH] ALSA: hda: cs35l56: Perform firmware download in the
> > background
> > 
> > On Thu, 02 May 2024 11:21:36 +0200,
> > Richard Fitzgerald wrote:
> > >
> > > On 02/05/2024 08:34, Takashi Iwai wrote:
> > > > On Wed, 01 May 2024 13:17:55 +0200,
> > > > Simon Trimmer wrote:
> > > >> @@ -964,6 +1011,14 @@ int cs35l56_hda_common_probe(struct
> > cs35l56_hda *cs35l56, int hid, int id)
> > > >>   	mutex_init(&cs35l56->base.irq_lock);
> > > >>   	dev_set_drvdata(cs35l56->base.dev, cs35l56);
> > > >>   +	cs35l56->dsp_wq =
> > > >> create_singlethread_workqueue("cs35l56-dsp");
> > > >> +	if (!cs35l56->dsp_wq) {
> > > >> +		ret = -ENOMEM;
> > > >> +		goto err;
> > > >> +	}
> > > >
> > > > Do we really need a dedicated workqueue?  In most usages, simple
> > > > schedule_work*() works fine and is recommended.
> > > >
> > >
> > > On a slow I2C bus with 4 amps this work could take over 2 seconds.
> > > That seems too long to be blocking a global system queue. We use a
> > > dedicated queue in the ASoC driver.
> > >
> > > Also if we queue work on an ordered (single-threaded) system queue the
> > > firmware won't be downloaded to multiple amps in parallel, so we don't
> > > get the best use of the available bus bandwidth.
> > 
> > OK, that sounds like a sensible argument.
> > 
> > But the patch has no call of a queue destructor.  Won't it leak
> > resources?
> 
> Oops that's a good spot - I missed that and will send a v2

If you submit a newer version, it'd be appreciated to explain about
the workqueue usage in the patch description, too.


thanks,

Takashi
diff mbox series

Patch

diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c
index 1a3f84599cb5..042c2407c007 100644
--- a/sound/pci/hda/cs35l56_hda.c
+++ b/sound/pci/hda/cs35l56_hda.c
@@ -13,6 +13,7 @@ 
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/workqueue.h>
 #include <sound/core.h>
 #include <sound/cs-amp-lib.h>
 #include <sound/hda_codec.h>
@@ -50,11 +51,19 @@  static const struct reg_sequence cs35l56_hda_dai_config[] = {
 
 };
 
+static void cs35l56_hda_wait_dsp_ready(struct cs35l56_hda *cs35l56)
+{
+	/* Wait for patching to complete */
+	flush_work(&cs35l56->dsp_work);
+}
+
 static void cs35l56_hda_play(struct cs35l56_hda *cs35l56)
 {
 	unsigned int val;
 	int ret;
 
+	cs35l56_hda_wait_dsp_ready(cs35l56);
+
 	pm_runtime_get_sync(cs35l56->base.dev);
 	ret = cs35l56_mbox_send(&cs35l56->base, CS35L56_MBOX_CMD_AUDIO_PLAY);
 	if (ret == 0) {
@@ -180,6 +189,8 @@  static int cs35l56_hda_mixer_get(struct snd_kcontrol *kcontrol,
 	unsigned int reg_val;
 	int i;
 
+	cs35l56_hda_wait_dsp_ready(cs35l56);
+
 	regmap_read(cs35l56->base.regmap, kcontrol->private_value, &reg_val);
 	reg_val &= CS35L56_ASP_TXn_SRC_MASK;
 
@@ -203,6 +214,8 @@  static int cs35l56_hda_mixer_put(struct snd_kcontrol *kcontrol,
 	if (item >= CS35L56_NUM_INPUT_SRC)
 		return -EINVAL;
 
+	cs35l56_hda_wait_dsp_ready(cs35l56);
+
 	regmap_update_bits_check(cs35l56->base.regmap, kcontrol->private_value,
 				 CS35L56_INPUT_MASK, cs35l56_tx_input_values[item],
 				 &changed);
@@ -227,6 +240,8 @@  static int cs35l56_hda_posture_get(struct snd_kcontrol *kcontrol,
 	unsigned int pos;
 	int ret;
 
+	cs35l56_hda_wait_dsp_ready(cs35l56);
+
 	ret = regmap_read(cs35l56->base.regmap, CS35L56_MAIN_POSTURE_NUMBER, &pos);
 	if (ret)
 		return ret;
@@ -248,6 +263,8 @@  static int cs35l56_hda_posture_put(struct snd_kcontrol *kcontrol,
 	    (pos > CS35L56_MAIN_POSTURE_MAX))
 		return -EINVAL;
 
+	cs35l56_hda_wait_dsp_ready(cs35l56);
+
 	ret = regmap_update_bits_check(cs35l56->base.regmap,
 				       CS35L56_MAIN_POSTURE_NUMBER,
 				       CS35L56_MAIN_POSTURE_MASK,
@@ -291,6 +308,8 @@  static int cs35l56_hda_vol_get(struct snd_kcontrol *kcontrol,
 	int vol;
 	int ret;
 
+	cs35l56_hda_wait_dsp_ready(cs35l56);
+
 	ret = regmap_read(cs35l56->base.regmap, CS35L56_MAIN_RENDER_USER_VOLUME, &raw_vol);
 
 	if (ret)
@@ -323,6 +342,8 @@  static int cs35l56_hda_vol_put(struct snd_kcontrol *kcontrol,
 	raw_vol = (vol + CS35L56_MAIN_RENDER_USER_VOLUME_MIN) <<
 		  CS35L56_MAIN_RENDER_USER_VOLUME_SHIFT;
 
+	cs35l56_hda_wait_dsp_ready(cs35l56);
+
 	ret = regmap_update_bits_check(cs35l56->base.regmap,
 				       CS35L56_MAIN_RENDER_USER_VOLUME,
 				       CS35L56_MAIN_RENDER_USER_VOLUME_MASK,
@@ -539,8 +560,9 @@  static void cs35l56_hda_release_firmware_files(const struct firmware *wmfw_firmw
 	kfree(coeff_filename);
 }
 
-static void cs35l56_hda_add_dsp_controls(struct cs35l56_hda *cs35l56)
+static void cs35l56_hda_create_dsp_controls_work(struct work_struct *work)
 {
+	struct cs35l56_hda *cs35l56 = container_of(work, struct cs35l56_hda, control_work);
 	struct hda_cs_dsp_ctl_info info;
 
 	info.device_name = cs35l56->amp_name;
@@ -566,7 +588,7 @@  static void cs35l56_hda_apply_calibration(struct cs35l56_hda *cs35l56)
 		dev_info(cs35l56->base.dev, "Calibration applied\n");
 }
 
-static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
+static void cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
 {
 	const struct firmware *coeff_firmware = NULL;
 	const struct firmware *wmfw_firmware = NULL;
@@ -574,15 +596,27 @@  static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
 	char *wmfw_filename = NULL;
 	unsigned int preloaded_fw_ver;
 	bool firmware_missing;
-	int ret = 0;
+	bool add_dsp_controls_required = false;
+	int ret;
 
-	/* Prepare for a new DSP power-up */
+	/*
+	 * Prepare for a new DSP power-up. If the DSP has had firmware
+	 * downloaded previously then it needs to be powered down so that it
+	 * can be updated and if hadn't been patched before then the controls
+	 * will need to be added once firmware download succeeds.
+	 */
 	if (cs35l56->base.fw_patched)
 		cs_dsp_power_down(&cs35l56->cs_dsp);
+	else
+		add_dsp_controls_required = true;
 
 	cs35l56->base.fw_patched = false;
 
-	pm_runtime_get_sync(cs35l56->base.dev);
+	ret = pm_runtime_resume_and_get(cs35l56->base.dev);
+	if (ret < 0) {
+		dev_err(cs35l56->base.dev, "Failed to resume and get %d\n", ret);
+		return;
+	}
 
 	/*
 	 * The firmware can only be upgraded if it is currently running
@@ -606,7 +640,6 @@  static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
 	 */
 	if (!coeff_firmware && firmware_missing) {
 		dev_err(cs35l56->base.dev, ".bin file required but not found\n");
-		ret = -ENOENT;
 		goto err_fw_release;
 	}
 
@@ -657,6 +690,15 @@  static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
 			  CS35L56_FIRMWARE_MISSING);
 	cs35l56->base.fw_patched = true;
 
+	/*
+	 * Adding controls is deferred to prevent a lock inversion - ALSA takes
+	 * the controls_rwsem when adding a control, the get() / put()
+	 * functions of a control are called holding controls_rwsem and those
+	 * that depend on running firmware wait for dsp_work() to complete.
+	 */
+	if (add_dsp_controls_required)
+		queue_work(cs35l56->dsp_wq, &cs35l56->control_work);
+
 	ret = cs_dsp_run(&cs35l56->cs_dsp);
 	if (ret)
 		dev_dbg(cs35l56->base.dev, "%s: cs_dsp_run ret %d\n", __func__, ret);
@@ -676,15 +718,19 @@  static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
 					   coeff_firmware, coeff_filename);
 err_pm_put:
 	pm_runtime_put(cs35l56->base.dev);
+}
 
-	return ret;
+static void cs35l56_hda_dsp_work(struct work_struct *work)
+{
+	struct cs35l56_hda *cs35l56 = container_of(work, struct cs35l56_hda, dsp_work);
+
+	cs35l56_hda_fw_load(cs35l56);
 }
 
 static int cs35l56_hda_bind(struct device *dev, struct device *master, void *master_data)
 {
 	struct cs35l56_hda *cs35l56 = dev_get_drvdata(dev);
 	struct hda_component *comps = master_data;
-	int ret;
 
 	if (!comps || cs35l56->index < 0 || cs35l56->index >= HDA_MAX_COMPONENTS)
 		return -EINVAL;
@@ -698,12 +744,9 @@  static int cs35l56_hda_bind(struct device *dev, struct device *master, void *mas
 	strscpy(comps->name, dev_name(dev), sizeof(comps->name));
 	comps->playback_hook = cs35l56_hda_playback_hook;
 
-	ret = cs35l56_hda_fw_load(cs35l56);
-	if (ret)
-		return ret;
+	queue_work(cs35l56->dsp_wq, &cs35l56->dsp_work);
 
 	cs35l56_hda_create_controls(cs35l56);
-	cs35l56_hda_add_dsp_controls(cs35l56);
 
 #if IS_ENABLED(CONFIG_SND_DEBUG)
 	cs35l56->debugfs_root = debugfs_create_dir(dev_name(cs35l56->base.dev), sound_debugfs_root);
@@ -720,6 +763,9 @@  static void cs35l56_hda_unbind(struct device *dev, struct device *master, void *
 	struct cs35l56_hda *cs35l56 = dev_get_drvdata(dev);
 	struct hda_component *comps = master_data;
 
+	cancel_work_sync(&cs35l56->dsp_work);
+	cancel_work_sync(&cs35l56->control_work);
+
 	cs35l56_hda_remove_controls(cs35l56);
 
 #if IS_ENABLED(CONFIG_SND_DEBUG)
@@ -747,6 +793,10 @@  static int cs35l56_hda_system_suspend(struct device *dev)
 {
 	struct cs35l56_hda *cs35l56 = dev_get_drvdata(dev);
 
+	cs35l56_hda_wait_dsp_ready(cs35l56);
+
+	flush_work(&cs35l56->control_work);
+
 	if (cs35l56->playing)
 		cs35l56_hda_pause(cs35l56);
 
@@ -842,11 +892,8 @@  static int cs35l56_hda_system_resume(struct device *dev)
 
 	ret = cs35l56_is_fw_reload_needed(&cs35l56->base);
 	dev_dbg(cs35l56->base.dev, "fw_reload_needed: %d\n", ret);
-	if (ret > 0) {
-		ret = cs35l56_hda_fw_load(cs35l56);
-		if (ret)
-			return ret;
-	}
+	if (ret > 0)
+		queue_work(cs35l56->dsp_wq, &cs35l56->dsp_work);
 
 	if (cs35l56->playing)
 		cs35l56_hda_play(cs35l56);
@@ -964,6 +1011,14 @@  int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int hid, int id)
 	mutex_init(&cs35l56->base.irq_lock);
 	dev_set_drvdata(cs35l56->base.dev, cs35l56);
 
+	cs35l56->dsp_wq = create_singlethread_workqueue("cs35l56-dsp");
+	if (!cs35l56->dsp_wq) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	INIT_WORK(&cs35l56->dsp_work, cs35l56_hda_dsp_work);
+	INIT_WORK(&cs35l56->control_work, cs35l56_hda_create_dsp_controls_work);
+
 	ret = cs35l56_hda_read_acpi(cs35l56, hid, id);
 	if (ret)
 		goto err;
diff --git a/sound/pci/hda/cs35l56_hda.h b/sound/pci/hda/cs35l56_hda.h
index 464e4aa63cd1..d207e4e0d167 100644
--- a/sound/pci/hda/cs35l56_hda.h
+++ b/sound/pci/hda/cs35l56_hda.h
@@ -14,6 +14,7 @@ 
 #include <linux/firmware/cirrus/cs_dsp.h>
 #include <linux/firmware/cirrus/wmfw.h>
 #include <linux/regulator/consumer.h>
+#include <linux/workqueue.h>
 #include <sound/cs35l56.h>
 
 struct dentry;
@@ -21,6 +22,9 @@  struct dentry;
 struct cs35l56_hda {
 	struct cs35l56_base base;
 	struct hda_codec *codec;
+	struct work_struct dsp_work;
+	struct work_struct control_work;
+	struct workqueue_struct *dsp_wq;
 
 	int index;
 	const char *system_name;