diff mbox series

[v2,2/7] ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection

Message ID 20240508-midas-wm1811-gpio-jack-v2-2-b4d36cd02c6e@gmail.com (mailing list archive)
State Superseded
Headers show
Series ASoC: samsung: midas-audio: Add GPIO-based headset jack detection | expand

Commit Message

Artur Weber May 8, 2024, 10:58 a.m. UTC
Some Samsung devices that share the midas-audio driver use a GPIO-based
approach to headset jack detection, as opposed to using the built-in
jack detection provided by the wm8994 driver. This setup uses two GPIOs
(one for jack detection and another for key detection) and an ADC
channel for determining the jack type or button pressed.

Add DT configuration values that allow for describing these setups.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changes in v2:
- Added vendor prefix to threshold properties
- Dropped pipe (|) character from description: field
---
 .../bindings/sound/samsung,midas-audio.yaml        | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Comments

Rob Herring (Arm) May 8, 2024, 12:52 p.m. UTC | #1
On Wed, 08 May 2024 12:58:50 +0200, Artur Weber wrote:
> Some Samsung devices that share the midas-audio driver use a GPIO-based
> approach to headset jack detection, as opposed to using the built-in
> jack detection provided by the wm8994 driver. This setup uses two GPIOs
> (one for jack detection and another for key detection) and an ADC
> channel for determining the jack type or button pressed.
> 
> Add DT configuration values that allow for describing these setups.
> 
> Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
> ---
> Changes in v2:
> - Added vendor prefix to threshold properties
> - Dropped pipe (|) character from description: field
> ---
>  .../bindings/sound/samsung,midas-audio.yaml        | 30 ++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml:95:26: [error] syntax error: mapping values are not allowed here (syntax)

dtschema/dtc warnings/errors:
make[2]: *** Deleting file 'Documentation/devicetree/bindings/sound/samsung,midas-audio.example.dts'
Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml:95:26: mapping values are not allowed in this context
make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/sound/samsung,midas-audio.example.dts] Error 1
make[2]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml:95:26: mapping values are not allowed in this context
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml: ignoring, error parsing file
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240508-midas-wm1811-gpio-jack-v2-2-b4d36cd02c6e@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
index 6ed53dd0bb53..6b760a73e8bf 100644
--- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
@@ -64,6 +64,36 @@  properties:
     maxItems: 1
     description: GPIO pin for line out selection
 
+  headset-detect-gpios:
+    maxItems: 1
+    description: GPIO for detection of headset insertion
+
+  headset-key-gpios:
+    maxItems: 1
+    description: GPIO for detection of headset key press
+
+  io-channels:
+    maxItems: 1
+    description: IO channel to read micbias voltage for headset detection
+
+  io-channel-names:
+    const: headset-detect
+
+  samsung,headset-4pole-threshold-microvolt:
+    minItems: 2
+    maxItems: 2
+    description:
+      Array containing minimum and maximum IO channel value for 4-pole
+      (with microphone/button) headsets. If the IO channel value is
+      outside of this range, a 3-pole headset is assumed.
+
+  samsung,headset-button-threshold-microvolt:
+    minItems: 3
+    maxItems: 3
+    description:
+      Array of minimum (inclusive) IO channel values for headset button
+      detection, in order: "Media", "Volume Up" and "Volume Down".
+
 required:
   - compatible
   - cpu