diff mbox series

[2/6] ASoC: codecs: wsa883x: parse port-mapping information

Message ID 20240626-port-map-v1-2-bd8987d2b332@linaro.org (mailing list archive)
State Superseded
Headers show
Series ASoC: codecs: wsa88xx: add support for static port mapping. | expand

Commit Message

Srinivas Kandagatla June 27, 2024, 11:55 a.m. UTC
Add support to parse static master port map information from device tree.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/codecs/wsa883x.c | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Krzysztof Kozlowski June 27, 2024, 12:06 p.m. UTC | #1
On 27/06/2024 13:55, Srinivas Kandagatla wrote:
> Add support to parse static master port map information from device tree.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  sound/soc/codecs/wsa883x.c | 8 ++++++++
>  1 file changed, 8 insertions(+)


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Dmitry Baryshkov June 27, 2024, 1:36 p.m. UTC | #2
On Thu, Jun 27, 2024 at 12:55:18PM GMT, Srinivas Kandagatla wrote:
> Add support to parse static master port map information from device tree.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  sound/soc/codecs/wsa883x.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
> index a2e86ef7d18f..43156d39480f 100644
> --- a/sound/soc/codecs/wsa883x.c
> +++ b/sound/soc/codecs/wsa883x.c
> @@ -1399,6 +1399,14 @@ static int wsa883x_probe(struct sdw_slave *pdev,
>  	wsa883x->sconfig.direction = SDW_DATA_DIR_RX;
>  	wsa883x->sconfig.type = SDW_STREAM_PDM;
>  
> +	/**
> +	 * Port map index starts with 0, however the data port for this codec
> +	 * are from index 1
> +	 */
> +	if (of_property_read_u32_array(dev->of_node, "qcom,port-mapping", &pdev->m_port_map[1],
> +					WSA883X_MAX_SWR_PORTS))
> +		dev_info(dev, "Static Port mapping not specified\n");

dev_info looks strange. It should be either dev_warn or dev_dbg.

> +
>  	pdev->prop.sink_ports = GENMASK(WSA883X_MAX_SWR_PORTS, 0);
>  	pdev->prop.simple_clk_stop_capable = true;
>  	pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
> 
> -- 
> 2.25.1
>
Srinivas Kandagatla June 27, 2024, 2:34 p.m. UTC | #3
On 27/06/2024 14:36, Dmitry Baryshkov wrote:
> On Thu, Jun 27, 2024 at 12:55:18PM GMT, Srinivas Kandagatla wrote:
>> Add support to parse static master port map information from device tree.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>>   sound/soc/codecs/wsa883x.c | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
>> index a2e86ef7d18f..43156d39480f 100644
>> --- a/sound/soc/codecs/wsa883x.c
>> +++ b/sound/soc/codecs/wsa883x.c
>> @@ -1399,6 +1399,14 @@ static int wsa883x_probe(struct sdw_slave *pdev,
>>   	wsa883x->sconfig.direction = SDW_DATA_DIR_RX;
>>   	wsa883x->sconfig.type = SDW_STREAM_PDM;
>>   
>> +	/**
>> +	 * Port map index starts with 0, however the data port for this codec
>> +	 * are from index 1
>> +	 */
>> +	if (of_property_read_u32_array(dev->of_node, "qcom,port-mapping", &pdev->m_port_map[1],
>> +					WSA883X_MAX_SWR_PORTS))
>> +		dev_info(dev, "Static Port mapping not specified\n");
> 
> dev_info looks strange. It should be either dev_warn or dev_dbg.

dev_dbg should be good in this case!

--srini
> 
>> +
>>   	pdev->prop.sink_ports = GENMASK(WSA883X_MAX_SWR_PORTS, 0);
>>   	pdev->prop.simple_clk_stop_capable = true;
>>   	pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
>>
>> -- 
>> 2.25.1
>>
>
diff mbox series

Patch

diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
index a2e86ef7d18f..43156d39480f 100644
--- a/sound/soc/codecs/wsa883x.c
+++ b/sound/soc/codecs/wsa883x.c
@@ -1399,6 +1399,14 @@  static int wsa883x_probe(struct sdw_slave *pdev,
 	wsa883x->sconfig.direction = SDW_DATA_DIR_RX;
 	wsa883x->sconfig.type = SDW_STREAM_PDM;
 
+	/**
+	 * Port map index starts with 0, however the data port for this codec
+	 * are from index 1
+	 */
+	if (of_property_read_u32_array(dev->of_node, "qcom,port-mapping", &pdev->m_port_map[1],
+					WSA883X_MAX_SWR_PORTS))
+		dev_info(dev, "Static Port mapping not specified\n");
+
 	pdev->prop.sink_ports = GENMASK(WSA883X_MAX_SWR_PORTS, 0);
 	pdev->prop.simple_clk_stop_capable = true;
 	pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;