diff mbox series

[v2] ASoC: dt-bindings: fsl,imx-audio-es8328: Convert to dtschema

Message ID 20240722063657.23018-1-animeshagarwal28@gmail.com (mailing list archive)
State Accepted
Commit 00645b42e3ca6a35fc4a357dd769bcef41d4a077
Headers show
Series [v2] ASoC: dt-bindings: fsl,imx-audio-es8328: Convert to dtschema | expand

Commit Message

Animesh Agarwal July 22, 2024, 6:36 a.m. UTC
Convert the Freescale i.MX audio complex with ES8328 codec bindings to
DT schema format.

Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>

---
Changes in v2:
  - Changed top level ref to sound-card-common.yaml
---
 .../bindings/sound/fsl,imx-audio-es8328.yaml  | 111 ++++++++++++++++++
 .../bindings/sound/imx-audio-es8328.txt       |  60 ----------
 2 files changed, 111 insertions(+), 60 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/fsl,imx-audio-es8328.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/imx-audio-es8328.txt

Comments

Rob Herring (Arm) July 23, 2024, 2:28 p.m. UTC | #1
On Mon, 22 Jul 2024 12:06:51 +0530, Animesh Agarwal wrote:
> Convert the Freescale i.MX audio complex with ES8328 codec bindings to
> DT schema format.
> 
> Cc: Daniel Baluta <daniel.baluta@nxp.com>
> Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
> 
> ---
> Changes in v2:
>   - Changed top level ref to sound-card-common.yaml
> ---
>  .../bindings/sound/fsl,imx-audio-es8328.yaml  | 111 ++++++++++++++++++
>  .../bindings/sound/imx-audio-es8328.txt       |  60 ----------
>  2 files changed, 111 insertions(+), 60 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/sound/fsl,imx-audio-es8328.yaml
>  delete mode 100644 Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Mark Brown July 29, 2024, 5:17 p.m. UTC | #2
On Mon, 22 Jul 2024 12:06:51 +0530, Animesh Agarwal wrote:
> Convert the Freescale i.MX audio complex with ES8328 codec bindings to
> DT schema format.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: dt-bindings: fsl,imx-audio-es8328: Convert to dtschema
      commit: 00645b42e3ca6a35fc4a357dd769bcef41d4a077

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-audio-es8328.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-audio-es8328.yaml
new file mode 100644
index 000000000000..5eb6f5812cf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,imx-audio-es8328.yaml
@@ -0,0 +1,111 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx-audio-es8328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX audio complex with ES8328 codec
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    const: fsl,imx-audio-es8328
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex
+
+  ssi-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the i.MX SSI controller
+
+  jack-gpio:
+    description: Optional GPIO for headphone jack
+    maxItems: 1
+
+  audio-amp-supply:
+    description: Power regulator for speaker amps
+
+  audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the ES8328 audio codec
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components. Each entry
+      is a pair of strings, the first being the connection's sink, the second
+      being the connection's source. Valid names could be power supplies,
+      ES8328 pins, and the jacks on the board:
+
+      Power supplies:
+        * audio-amp
+
+      ES8328 pins:
+        * LOUT1
+        * LOUT2
+        * ROUT1
+        * ROUT2
+        * LINPUT1
+        * LINPUT2
+        * RINPUT1
+        * RINPUT2
+        * Mic PGA
+
+      Board connectors:
+        * Headphone
+        * Speaker
+        * Mic Jack
+
+  mux-int-port:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The internal port of the i.MX audio muxer (AUDMUX)
+    enum: [1, 2, 7]
+    default: 1
+
+  mux-ext-port:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The external port of the i.MX audio muxer (AUDMIX)
+    enum: [3, 4, 5, 6]
+    default: 3
+
+required:
+  - compatible
+  - model
+  - ssi-controller
+  - jack-gpio
+  - audio-amp-supply
+  - audio-codec
+  - audio-routing
+  - mux-int-port
+  - mux-ext-port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "fsl,imx-audio-es8328";
+        model = "imx-audio-es8328";
+        ssi-controller = <&ssi1>;
+        audio-codec = <&codec>;
+        jack-gpio = <&gpio5 15 0>;
+        audio-amp-supply = <&reg_audio_amp>;
+        audio-routing =
+            "Speaker", "LOUT2",
+            "Speaker", "ROUT2",
+            "Speaker", "audio-amp",
+            "Headphone", "ROUT1",
+            "Headphone", "LOUT1",
+            "LINPUT1", "Mic Jack",
+            "RINPUT1", "Mic Jack",
+            "Mic Jack", "Mic Bias";
+        mux-int-port = <1>;
+        mux-ext-port = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt b/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
deleted file mode 100644
index 07b68ab206fb..000000000000
--- a/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
+++ /dev/null
@@ -1,60 +0,0 @@ 
-Freescale i.MX audio complex with ES8328 codec
-
-Required properties:
-- compatible       : "fsl,imx-audio-es8328"
-- model            : The user-visible name of this sound complex
-- ssi-controller   : The phandle of the i.MX SSI controller
-- jack-gpio        : Optional GPIO for headphone jack
-- audio-amp-supply : Power regulator for speaker amps
-- audio-codec      : The phandle of the ES8328 audio codec
-- audio-routing    : A list of the connections between audio components.
-                     Each entry is a pair of strings, the first being the
-		     connection's sink, the second being the connection's
-		     source. Valid names could be power supplies, ES8328
-		     pins, and the jacks on the board:
-
-			Power supplies:
-			   * audio-amp
-
-			ES8328 pins:
-			   * LOUT1
-			   * LOUT2
-			   * ROUT1
-			   * ROUT2
-			   * LINPUT1
-			   * LINPUT2
-			   * RINPUT1
-			   * RINPUT2
-			   * Mic PGA
-
-			Board connectors:
-			   * Headphone
-			   * Speaker
-			   * Mic Jack
-- mux-int-port     : The internal port of the i.MX audio muxer (AUDMUX)
-- mux-ext-port     : The external port of the i.MX audio muxer (AUDMIX)
-
-Note: The AUDMUX port numbering should start at 1, which is consistent with
-hardware manual.
-
-Example:
-
-sound {
-	compatible = "fsl,imx-audio-es8328";
-	model = "imx-audio-es8328";
-	ssi-controller = <&ssi1>;
-	audio-codec = <&codec>;
-	jack-gpio = <&gpio5 15 0>;
-	audio-amp-supply = <&reg_audio_amp>;
-	audio-routing =
-		"Speaker", "LOUT2",
-		"Speaker", "ROUT2",
-		"Speaker", "audio-amp",
-		"Headphone", "ROUT1",
-		"Headphone", "LOUT1",
-		"LINPUT1", "Mic Jack",
-		"RINPUT1", "Mic Jack",
-		"Mic Jack", "Mic Bias";
-	mux-int-port = <1>;
-	mux-ext-port = <3>;
-};