@@ -2541,14 +2541,23 @@ enum {
#define SND_BBFPRO_CTL_REG2_PAD_AN1 4
#define SND_BBFPRO_CTL_REG2_PAD_AN2 5
-#define SND_BBFPRO_MIXER_IDX_MASK 0x1ff
+#define SND_BBFPRO_MIXER_MAIN_OUT_CH_OFFSET 992
+#define SND_BBFPRO_MIXER_IDX_MASK 0x3ff
#define SND_BBFPRO_MIXER_VAL_MASK 0x3ffff
#define SND_BBFPRO_MIXER_VAL_SHIFT 9
#define SND_BBFPRO_MIXER_VAL_MIN 0 // -inf
#define SND_BBFPRO_MIXER_VAL_MAX 65536 // +6dB
+#define SND_BBFPRO_GAIN_CHANNEL_MASK 0x03
+#define SND_BBFPRO_GAIN_CHANNEL_SHIFT 7
+#define SND_BBFPRO_GAIN_VAL_MASK 0x7f
+#define SND_BBFPRO_GAIN_VAL_MIN 0
+#define SND_BBFPRO_GAIN_VAL_MIC_MAX 65
+#define SND_BBFPRO_GAIN_VAL_LINE_MAX 18 // 9db in 0.5db incraments
+
#define SND_BBFPRO_USBREQ_CTL_REG1 0x10
#define SND_BBFPRO_USBREQ_CTL_REG2 0x17
+#define SND_BBFPRO_USBREQ_GAIN 0x1a
#define SND_BBFPRO_USBREQ_MIXER 0x12
static int snd_bbfpro_ctl_update(struct usb_mixer_interface *mixer, u8 reg,
@@ -2695,6 +2704,113 @@ static int snd_bbfpro_ctl_resume(struct usb_mixer_elem_list *list)
return snd_bbfpro_ctl_update(list->mixer, reg, idx, value);
}
+static int snd_bbfpro_gain_update(struct usb_mixer_interface *mixer,
+ u8 channel, u8 gain)
+{
+ int err;
+
+ struct snd_usb_audio *chip = mixer->chip;
+
+ if (channel < 2) {
+ // XLR preamp: 3-bit fine, 5-bit coarse; special case >60
+ if (gain < 60)
+ gain = ((gain % 3) << 5) | (gain / 3);
+ else
+ gain = ((gain % 6) << 5) | (60 / 3);
+ }
+
+ err = snd_usb_lock_shutdown(chip);
+ if (err < 0)
+ return err;
+
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0),
+ SND_BBFPRO_USBREQ_GAIN,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ gain, channel, NULL, 0);
+
+ snd_usb_unlock_shutdown(chip);
+ return err;
+}
+
+static int snd_bbfpro_gain_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int value = kcontrol->private_value & SND_BBFPRO_GAIN_VAL_MASK;
+ ucontrol->value.integer.value[0] = value;
+ return 0;
+}
+
+static int snd_bbfpro_gain_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ int pv, channel;
+
+ pv = kcontrol->private_value;
+ channel = (pv >> SND_BBFPRO_GAIN_CHANNEL_SHIFT) &
+ SND_BBFPRO_GAIN_CHANNEL_MASK;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = SND_BBFPRO_GAIN_VAL_MIN;
+
+ if (channel < 2) {
+ uinfo->value.integer.max = SND_BBFPRO_GAIN_VAL_MIC_MAX;
+ } else {
+ uinfo->value.integer.max = SND_BBFPRO_GAIN_VAL_LINE_MAX;
+ }
+
+ return 0;
+}
+
+static int snd_bbfpro_gain_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int pv, channel, old_value, value, err;
+
+ struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+ struct usb_mixer_interface *mixer = list->mixer;
+
+ pv = kcontrol->private_value;
+ channel = (pv >> SND_BBFPRO_GAIN_CHANNEL_SHIFT) &
+ SND_BBFPRO_GAIN_CHANNEL_MASK;
+ old_value = pv & SND_BBFPRO_GAIN_VAL_MASK;
+ value = ucontrol->value.integer.value[0];
+
+ if (channel < 2) {
+ if (value > SND_BBFPRO_GAIN_VAL_MIC_MAX)
+ return -EINVAL;
+ } else {
+ if (value > SND_BBFPRO_GAIN_VAL_LINE_MAX)
+ return -EINVAL;
+ }
+
+ if (value == old_value)
+ return 0;
+
+ err = snd_bbfpro_gain_update(mixer, channel, value);
+ if (err < 0)
+ return err;
+
+ kcontrol->private_value =
+ (channel << SND_BBFPRO_GAIN_CHANNEL_SHIFT) | value;
+ return 1;
+}
+
+static int snd_bbfpro_gain_resume(struct usb_mixer_elem_list *list)
+{
+ int pv, channel, value;
+
+ struct snd_kcontrol *kctl = list->kctl;
+
+ pv = kctl->private_value;
+ channel = (pv >> SND_BBFPRO_GAIN_CHANNEL_SHIFT) &
+ SND_BBFPRO_GAIN_CHANNEL_MASK;
+ value = pv & SND_BBFPRO_GAIN_VAL_MASK;
+
+ return snd_bbfpro_gain_update(list->mixer, channel, value);
+}
+
static int snd_bbfpro_vol_update(struct usb_mixer_interface *mixer, u16 index,
u32 value)
{
@@ -2790,6 +2906,15 @@ static const struct snd_kcontrol_new snd_bbfpro_ctl_control = {
.put = snd_bbfpro_ctl_put
};
+static const struct snd_kcontrol_new snd_bbfpro_gain_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .index = 0,
+ .info = snd_bbfpro_gain_info,
+ .get = snd_bbfpro_gain_get,
+ .put = snd_bbfpro_gain_put
+};
+
static const struct snd_kcontrol_new snd_bbfpro_vol_control = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
@@ -2813,6 +2938,18 @@ static int snd_bbfpro_ctl_add(struct usb_mixer_interface *mixer, u8 reg,
&knew, NULL);
}
+static int snd_bbfpro_gain_add(struct usb_mixer_interface *mixer, u8 channel,
+ char *name)
+{
+ struct snd_kcontrol_new knew = snd_bbfpro_gain_control;
+
+ knew.name = name;
+ knew.private_value = channel << SND_BBFPRO_GAIN_CHANNEL_SHIFT;
+
+ return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_gain_resume,
+ &knew, NULL);
+}
+
static int snd_bbfpro_vol_add(struct usb_mixer_interface *mixer, u16 index,
char *name)
{
@@ -2860,6 +2997,29 @@ static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer)
}
}
+ // Main out volume
+ for (i = 0 ; i < 12 ; ++i) {
+ snprintf(name, sizeof(name), "Main-Out %s", output[i]);
+ // Main outs are offset to 992
+ err = snd_bbfpro_vol_add(mixer,
+ i + SND_BBFPRO_MIXER_MAIN_OUT_CH_OFFSET,
+ name);
+ if (err < 0)
+ return err;
+ }
+
+ // Input gain
+ for (i = 0 ; i < 4 ; ++i) {
+ if (i < 2) {
+ snprintf(name, sizeof(name), "Mic-%s Gain", input[i]);
+ } else {
+ snprintf(name, sizeof(name), "Line-%s Gain", input[i]);
+ }
+ err = snd_bbfpro_gain_add(mixer, i, name);
+ if (err < 0)
+ return err;
+ }
+
// Control Reg 1
err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
SND_BBFPRO_CTL_REG1_CLK_OPTICAL,
Add missing input gain and master output mixer controls for RME Babyface Pro This patch implements: 1. Input gain controls for 2 mic and 2 line inputs 2. Master output volume controls for all 12 output channels These additions allow for more complete control of the Babyface Pro under Linux. Signed-off-by: Stefan Stistrup <sstistrup@gmail.com> --- sound/usb/mixer_quirks.c | 162 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 161 insertions(+), 1 deletion(-)