@@ -277,6 +277,11 @@ static inline int cs35l56_force_sync_asp1_registers_from_cache(struct cs35l56_ba
return 0;
}
+static inline bool cs35l56_is_otp_register(unsigned int reg)
+{
+ return (reg >> 16) == 3;
+}
+
extern struct regmap_config cs35l56_regmap_i2c;
extern struct regmap_config cs35l56_regmap_spi;
extern struct regmap_config cs35l56_regmap_sdw;
@@ -23,6 +23,79 @@
/* Register addresses are offset when sent over SoundWire */
#define CS35L56_SDW_ADDR_OFFSET 0x8000
+/* Cirrus bus bridge registers */
+#define CS35L56_SDW_MEM_ACCESS_STATUS 0xd0
+#define CS35L56_SDW_MEM_READ_DATA 0xd8
+
+#define CS35L56_SDW_LAST_LATE BIT(3)
+#define CS35L56_SDW_CMD_IN_PROGRESS BIT(2)
+#define CS35L56_SDW_RDATA_RDY BIT(0)
+
+#define CS35L56_LATE_READ_POLL_US 10
+#define CS35L56_LATE_READ_TIMEOUT_US 1000
+
+static int cs35l56_sdw_poll_mem_status(struct sdw_slave *peripheral,
+ unsigned int mask,
+ unsigned int match)
+{
+ int ret, val;
+
+ ret = read_poll_timeout(sdw_read_no_pm, val,
+ (val < 0) || ((val & mask) == match),
+ CS35L56_LATE_READ_POLL_US, CS35L56_LATE_READ_TIMEOUT_US,
+ false, peripheral, CS35L56_SDW_MEM_ACCESS_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (val < 0)
+ return val;
+
+ return 0;
+}
+
+static int cs35l56_sdw_slow_read(struct sdw_slave *peripheral, unsigned int reg,
+ u8 *buf, size_t val_size)
+{
+ int ret, i;
+
+ reg += CS35L56_SDW_ADDR_OFFSET;
+
+ for (i = 0; i < val_size; i += sizeof(u32)) {
+ /* Poll for bus bridge idle */
+ ret = cs35l56_sdw_poll_mem_status(peripheral,
+ CS35L56_SDW_CMD_IN_PROGRESS,
+ 0);
+ if (ret < 0) {
+ dev_err(&peripheral->dev, "!CMD_IN_PROGRESS fail: %d\n", ret);
+ return ret;
+ }
+
+ /* Reading LSByte triggers read of register to holding buffer */
+ sdw_read_no_pm(peripheral, reg + i);
+
+ /* Wait for data available */
+ ret = cs35l56_sdw_poll_mem_status(peripheral,
+ CS35L56_SDW_RDATA_RDY,
+ CS35L56_SDW_RDATA_RDY);
+ if (ret < 0) {
+ dev_err(&peripheral->dev, "RDATA_RDY fail: %d\n", ret);
+ return ret;
+ }
+
+ /* Read data from buffer */
+ ret = sdw_nread_no_pm(peripheral, CS35L56_SDW_MEM_READ_DATA,
+ sizeof(u32), &buf[i]);
+ if (ret) {
+ dev_err(&peripheral->dev, "Late read @%#x failed: %d\n", reg + i, ret);
+ return ret;
+ }
+
+ swab32s((u32 *)&buf[i]);
+ }
+
+ return 0;
+}
+
static int cs35l56_sdw_read_one(struct sdw_slave *peripheral, unsigned int reg, void *buf)
{
int ret;
@@ -48,6 +121,10 @@ static int cs35l56_sdw_read(void *context, const void *reg_buf,
int ret;
reg = le32_to_cpu(*(const __le32 *)reg_buf);
+
+ if (cs35l56_is_otp_register(reg))
+ return cs35l56_sdw_slow_read(peripheral, reg, buf8, val_size);
+
reg += CS35L56_SDW_ADDR_OFFSET;
if (val_size == 4)
Use the late-read buffer in the CS35L56 SoundWire interface to read OTP memory. The OTP memory has a longer access latency than chip registers and cannot guarantee to return the data value in the SoundWire control response if the bus clock is >4.8 MHz. The Cirrus SoundWire peripheral IP exposes the bridge-to-bus read buffer and status bits. For a read from OTP the bridge status bits are polled to wait for the OTP data to be loaded into the read buffer and the data is then read from there. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration") --- include/sound/cs35l56.h | 5 +++ sound/soc/codecs/cs35l56-sdw.c | 77 ++++++++++++++++++++++++++++++++++ 2 files changed, 82 insertions(+)