@@ -107,6 +107,8 @@
#define TASDEVICE_CMD_DELAY 0x3
#define TASDEVICE_CMD_FIELD_W 0x4
+#define TAS2781_ASUS_ID "1043"
+
enum audio_device {
TAS2563,
TAS2781,
@@ -156,6 +158,7 @@ struct tasdevice_priv {
struct tasdevice_rca rcabin;
struct calidata cali_data;
struct tasdevice_fw *fmw;
+ struct gpio_desc *speaker_id;
struct gpio_desc *reset;
struct mutex codec_lock;
struct regmap *regmap;
@@ -110,10 +110,19 @@ static int tas2781_get_i2c_res(struct acpi_resource *ares, void *data)
return 1;
}
+static const struct acpi_gpio_params speakerid_gpios = { 0, 0, false };
+
+static const struct acpi_gpio_mapping tas2781_speaker_id_gpios[] = {
+ { "speakerid-gpios", &speakerid_gpios, 1 },
+ { }
+};
+
static int tas2781_read_acpi(struct tasdevice_priv *p, const char *hid)
{
struct acpi_device *adev;
+ struct device *physdev;
LIST_HEAD(resources);
+ const char *sub;
int ret;
adev = acpi_dev_get_first_match_dev(hid, NULL, -1);
@@ -122,19 +131,44 @@ static int tas2781_read_acpi(struct tasdevice_priv *p, const char *hid)
"Failed to find an ACPI device for %s\n", hid);
return -ENODEV;
}
-
+ physdev = get_device(acpi_get_first_physical_node(adev));
ret = acpi_dev_get_resources(adev, &resources, tas2781_get_i2c_res, p);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(p->dev, "Failed to get ACPI resource.\n");
goto err;
+ }
+ sub = acpi_get_subsystem_id(ACPI_HANDLE(physdev));
+ if (IS_ERR(sub)) {
+ dev_err(p->dev, "Failed to get SUBSYS ID.\n");
+ goto err;
+ }
+ // Speaker id was needed for ASUS projects.
+ if (strstr(sub, TAS2781_ASUS_ID)) {
+ ret = devm_acpi_dev_add_driver_gpios(p->dev,
+ tas2781_speaker_id_gpios);
+ if (ret) {
+ dev_err(p->dev, "Unable to add GPIO.\n");
+ goto err;
+ }
+ p->speaker_id = devm_gpiod_get(p->dev, "speakerid", GPIOD_IN);
+ if (IS_ERR(p->speaker_id)) {
+ dev_err(p->dev, "Failed to get Speaker id.\n");
+ goto err;
+ }
+ } else {
+ p->speaker_id = NULL;
+ }
acpi_dev_free_resource_list(&resources);
strscpy(p->dev_name, hid, sizeof(p->dev_name));
+ put_device(physdev);
acpi_dev_put(adev);
return 0;
err:
dev_err(p->dev, "read acpi error, ret: %d\n", ret);
+ put_device(physdev);
acpi_dev_put(adev);
return ret;
@@ -615,7 +649,7 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context)
struct tasdevice_priv *tas_priv = context;
struct tas2781_hda *tas_hda = dev_get_drvdata(tas_priv->dev);
struct hda_codec *codec = tas_priv->codec;
- int i, ret;
+ int i, ret, spk_id;
pm_runtime_get_sync(tas_priv->dev);
mutex_lock(&tas_priv->codec_lock);
@@ -648,8 +682,25 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context)
tasdevice_dsp_remove(tas_priv);
tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING;
- scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%04X.bin",
- codec->core.subsystem_id & 0xffff);
+ if (tas_priv->speaker_id != NULL) {
+ // Speaker id need to be checked for ASUS only.
+ spk_id = gpiod_get_value(tas_priv->speaker_id);
+ if (spk_id < 0 || spk_id > 1) {
+ // Speaker id is not valid, use default.
+ dev_dbg(tas_priv->dev, "Wrong spk_id = %d\n", spk_id);
+ spk_id = 0;
+ }
+ scnprintf(tas_priv->coef_binaryname,
+ sizeof(tas_priv->coef_binaryname),
+ "TAS2XXX%04X%01d.bin",
+ lower_16_bits(codec->core.subsystem_id),
+ spk_id);
+ } else {
+ scnprintf(tas_priv->coef_binaryname,
+ sizeof(tas_priv->coef_binaryname),
+ "TAS2XXX%04X.bin",
+ lower_16_bits(codec->core.subsystem_id));
+ }
ret = tasdevice_dsp_parser(tas_priv);
if (ret) {
dev_err(tas_priv->dev, "dspfw load %s error\n",
@@ -793,7 +844,6 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt)
const char *device_name;
int ret;
-
tas_hda = devm_kzalloc(&clt->dev, sizeof(*tas_hda), GFP_KERNEL);
if (!tas_hda)
return -ENOMEM;
Add speaker id check by gpio in ACPI for ASUS projects. In other vendors, speaker id was checked by BIOS, and was applied in last bit of subsys id, so we can load corresponding firmware binary file for its speaker by subsys id. But in ASUS project, the firmware binary name will be appended an extra number to tell the speakers from different vendors. And this single digit come from gpio level of speaker id in BIOS. Signed-off-by: Baojun Xu <baojun.xu@ti.com> --- v2: - Change ASUS id from 0x10430000 to "1043". - Move gpio setting to tas2781_read_acpi() from probe. - Remove interrupt gpio in acpi_gpio_mapping. - Add sub and physdev in tas2781_read_acpi() for subsys id read. - Add debug log for get acpi resource failed. - Return error if get resource or subsys id failed. - Return error if get gpio fail for speaker id with ASUS projects. - Change fixed buffer lengh to sizeof(). - Change bits calculator to lower_16_bits(). - Remove unnecessary empty line in tas2781_hda_i2c_probe(). --- include/sound/tas2781.h | 3 ++ sound/pci/hda/tas2781_hda_i2c.c | 62 +++++++++++++++++++++++++++++---- 2 files changed, 59 insertions(+), 6 deletions(-)