diff mbox series

[v4,4/5] arm64: dts: qcom: sm4250: add LPASS LPI pin controller

Message ID 20241101005925.186696-5-alexey.klimov@linaro.org (mailing list archive)
State New
Headers show
Series qrb4210-rb2: add HDMI audio playback support | expand

Commit Message

Alexey Klimov Nov. 1, 2024, 12:59 a.m. UTC 
Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) pin
controller device node required for audio subsystem on Qualcomm
QRB4210 RB2. QRB4210 is based on sm4250 which has a slightly different
lpass pin controller comparing to sm6115.

While at this, also add description of lpi_i2s2 pins (active state)
required for audio playback via HDMI.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm4250.dtsi | 39 ++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi
index a0ed61925e12..1b9983ab122e 100644
--- a/arch/arm64/boot/dts/qcom/sm4250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi
@@ -36,3 +36,42 @@  &cpu6 {
 &cpu7 {
 	compatible = "qcom,kryo240";
 };
+
+&lpass_tlmm {
+	compatible = "qcom,sm4250-lpass-lpi-pinctrl";
+	gpio-ranges = <&lpass_tlmm 0 0 26>;
+
+	lpi_i2s2_active: lpi-i2s2-active-state {
+		sck-pins {
+			pins = "gpio10";
+			function = "i2s2_clk";
+			bias-disable;
+			drive-strength = <8>;
+			output-high;
+		};
+
+		ws-pins {
+			pins = "gpio11";
+			function = "i2s2_ws";
+			bias-disable;
+			drive-strength = <8>;
+			output-high;
+		};
+
+		data-pins {
+			pins = "gpio12";
+			function = "i2s2_data";
+			bias-disable;
+			drive-strength = <8>;
+			output-high;
+		};
+
+		ext-mclk1-pins {
+			pins = "gpio18";
+			function = "ext_mclk1_a";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+};