[v6,4/4] arm64: dts: qcom: qrb4210-rb2: add HDMI/I2S audio playback support

Commit Message

Alexey Klimov Dec. 4, 2024, 2 p.m. UTC

Add sound node and dsp-related piece to enable HDMI audio
playback support on Qualcomm QRB4210 RB2 board. That is the
only sound output supported for now.

The audio playback is verified using the following commands:

amixer -c0 cset iface=MIXER,name='SEC_MI2S_RX Audio Mixer MultiMedia1' 1
aplay -D hw:0,0 /usr/share/sounds/alsa/Front_Center.wav

The same path can be used as-is for I2S playback via first low-speed
connector when DIP switches are configured in a way to passthrough i2s
data to that low-speed connector instead of to lt9611uxc bridge.

Cc: Srinivas Kandagatla <[e-mail]>
Reviewed-by: Dmitry Baryshkov <[e-mail]>
Reviewed-by: Konrad Dybcio <[e-mail]>
Signed-off-by: Alexey Klimov <[e-mail]>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 51 ++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index a9540e92d3e6..edfb18c85da8 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -6,6 +6,8 @@ 
 /dts-v1/;
 
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/usb/pd.h>
 #include "sm4250.dtsi"
 #include "pm6125.dtsi"
@@ -103,6 +105,47 @@  led-wlan {
 		};
 	};
 
+	sound {
+		compatible = "qcom,qrb4210-rb2-sndcard";
+		pinctrl-0 = <&lpi_i2s2_active>;
+		pinctrl-names = "default";
+		model = "Qualcomm-RB2-WSA8815-Speakers-DMIC0";
+		audio-routing = "MM_DL1", "MultiMedia1 Playback",
+				"MM_DL2", "MultiMedia2 Playback";
+
+		mm1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		mm2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		hdmi-i2s-dai-link {
+			link-name = "HDMI/I2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&lt9611_codec 0>;
+			};
+		};
+	};
+
 	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VREG_HDMI_OUT_1P2";
@@ -318,6 +361,14 @@  &pon_resin {
 	status = "okay";
 };
 
+/* SECONDARY I2S uses 1 I2S SD Line for audio on LT9611UXC HDMI Bridge */
+&q6afedai {
+	dai@18 {
+		reg = <SECONDARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };