@@ -2,7 +2,7 @@
//
// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier
//
-// Copyright (C) 2022 - 2024 Texas Instruments Incorporated
+// Copyright (C) 2022 - 2025 Texas Instruments Incorporated
// https://www.ti.com
//
// The TAS2781 driver implements a flexible and configurable
@@ -30,8 +30,10 @@
#define PRE_DEVICE_C 0x12
#define PRE_DEVICE_D 0x16
-#define PPC3_VERSION 0x4100
-#define PPC3_VERSION_TAS2781 0x14600
+#define PPC3_VERSION_BASE 0x4100
+#define PPC3_VERSION_TAS2781_BASIC_MIN 0x14600
+#define PPC3_VERSION_TAS2781_ALPHA_MIN 0x4a00
+#define PPC3_VERSION_TAS2781_BETA_MIN 0x19400
#define TASDEVICE_DEVICE_SUM 8
#define TASDEVICE_CONFIG_SUM 64
@@ -106,6 +108,23 @@ struct tasdevice_calibration {
struct tasdevice_data dev_data;
};
+struct fct_param_address {
+ unsigned char thr[3];
+ unsigned char thr2[3];
+ unsigned char plt_flg[3];
+ unsigned char sin_gn[3];
+ unsigned char sin_gn2[3];
+ /* real-time spk impedance */
+ unsigned char r0_reg[3];
+ /* check spk connection */
+ unsigned char tf_reg[3];
+ /* check spk resonant frequency */
+ unsigned char a1_reg[3];
+ unsigned char a2_reg[3];
+ unsigned short size;
+ char *data;
+};
+
struct tasdevice_fw {
struct tasdevice_dspfw_hdr fw_hdr;
unsigned short nr_programs;
@@ -114,6 +133,7 @@ struct tasdevice_fw {
struct tasdevice_config *configs;
unsigned short nr_calibrations;
struct tasdevice_calibration *calibrations;
+ struct fct_param_address fct_par_addr;
struct device *dev;
};
@@ -2,7 +2,7 @@
//
// ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier
//
-// Copyright (C) 2022 - 2024 Texas Instruments Incorporated
+// Copyright (C) 2022 - 2025 Texas Instruments Incorporated
// https://www.ti.com
//
// The TAS2563/TAS2781 driver implements a flexible and configurable
@@ -112,6 +112,12 @@ enum audio_device {
TAS2781,
};
+enum dspbin_type {
+ TASDEV_BASIC,
+ TASDEV_ALPHA,
+ TASDEV_BETA,
+};
+
enum device_catlog_id {
LENOVO = 0,
OTHERS
@@ -126,6 +132,7 @@ struct bulk_reg_val {
struct tasdevice {
struct bulk_reg_val *cali_data_backup;
+ struct bulk_reg_val alp_cali_bckp;
struct tasdevice_fw *cali_data_fmw;
unsigned int dev_addr;
unsigned int err_code;
@@ -171,6 +178,7 @@ struct tasdevice_priv {
unsigned char dev_name[32];
const char *name_prefix;
unsigned char ndev;
+ unsigned int dspbin_typ;
unsigned int magic_num;
unsigned int chip_id;
unsigned int sysclk;
@@ -196,6 +204,9 @@ struct tasdevice_priv {
int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_priv,
struct tasdevice_fw *tas_fmw,
const struct firmware *fmw, int offset);
+ int (*fw_parse_fct_param_address)(struct tasdevice_priv *tas_priv,
+ struct tasdevice_fw *tas_fmw,
+ const struct firmware *fmw, int offset);
int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv,
struct tasdev_blk *block);
For calibration, basic version does not contain any calibration addresses, it depends on calibration tool to convery the addresses to the driver. Since Alpha and Beta firmware, all the calibration addresses are saved into the firmware. Signed-off-by: Shenghao Ding <shenghao-ding@ti.com> --- v1: - update the year from 2024 to 2025. - Add dspbin_type to distinguish different dspbin types, such as TASDEV_BASIC, TASDEV_ALPHA, and TASDEV_BETA. - Add struct bulk_reg_val alp_cali_bckp to store the value of pilot tone threshold only for TASDEV_ALPHA & TASDEV_BETA firmware. - Add the declaration of (*fw_parse_fct_param_address)() to parse the addresses of calibration params. - Add the minimum version of TASDEV_ALPHA and TASDEV_BETA firmware. - Add the definition of struct fct_param_address. --- include/sound/tas2781-dsp.h | 26 +++++++++++++++++++++++--- include/sound/tas2781.h | 13 ++++++++++++- 2 files changed, 35 insertions(+), 4 deletions(-)