diff mbox series

[3/3] ASoC: codec: wcd9335: Convert to GPIO descriptors

Message ID 20250324-wcd-gpiod-v1-3-27afa472e331@nxp.com (mailing list archive)
State Superseded
Headers show
Series ASoC: codec: wcd93xx: Convert to GPIO descriptors | expand

Commit Message

Peng Fan (OSS) March 24, 2025, 2:26 a.m. UTC
From: Peng Fan <peng.fan@nxp.com>

of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use dev_gpiod_get to get GPIO descriptor.
- Use gpiod_set_value to configure output value.

With legacy of_gpio API, the driver set gpio value 0 to assert reset,
and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
DTS, so set GPIOD_ASIS when get GPIO descriptors, and set value 1 means
output low, set value 0 means output high with gpiod API.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 sound/soc/codecs/wcd9335.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

Comments

Linus Walleij March 24, 2025, 7:47 a.m. UTC | #1
On Mon, Mar 24, 2025 at 3:28 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote:

> From: Peng Fan <peng.fan@nxp.com>
>
> of_gpio.h is deprecated, update the driver to use GPIO descriptors.
> - Use dev_gpiod_get to get GPIO descriptor.
> - Use gpiod_set_value to configure output value.
>
> With legacy of_gpio API, the driver set gpio value 0 to assert reset,
> and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
> DTS, so set GPIOD_ASIS when get GPIO descriptors, and set value 1 means
> output low, set value 0 means output high with gpiod API.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c
index 7cef43bb2a8800971604b0e1ac55aac26c5919bd..90cf4f79cbde5f704549d41771f085574045ff46 100644
--- a/sound/soc/codecs/wcd9335.c
+++ b/sound/soc/codecs/wcd9335.c
@@ -17,7 +17,7 @@ 
 #include <sound/soc.h>
 #include <sound/pcm_params.h>
 #include <sound/soc-dapm.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <sound/tlv.h>
@@ -331,7 +331,7 @@  struct wcd9335_codec {
 	int comp_enabled[COMPANDER_MAX];
 
 	int intr1;
-	int reset_gpio;
+	struct gpio_desc *reset_gpio;
 	struct regulator_bulk_data supplies[WCD9335_MAX_SUPPLY];
 
 	unsigned int rx_port_value[WCD9335_RX_MAX];
@@ -4975,12 +4975,11 @@  static const struct regmap_irq_chip wcd9335_regmap_irq1_chip = {
 static int wcd9335_parse_dt(struct wcd9335_codec *wcd)
 {
 	struct device *dev = wcd->dev;
-	struct device_node *np = dev->of_node;
 	int ret;
 
-	wcd->reset_gpio = of_get_named_gpio(np,	"reset-gpios", 0);
-	if (wcd->reset_gpio < 0)
-		return dev_err_probe(dev, wcd->reset_gpio, "Reset GPIO missing from DT\n");
+	wcd->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
+	if (IS_ERR(wcd->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(wcd->reset_gpio), "Reset GPIO missing from DT\n");
 
 	wcd->mclk = devm_clk_get(dev, "mclk");
 	if (IS_ERR(wcd->mclk))
@@ -5023,9 +5022,9 @@  static int wcd9335_power_on_reset(struct wcd9335_codec *wcd)
 	 */
 	usleep_range(600, 650);
 
-	gpio_direction_output(wcd->reset_gpio, 0);
+	gpiod_set_value(wcd->reset_gpio, 1);
 	msleep(20);
-	gpio_set_value(wcd->reset_gpio, 1);
+	gpiod_set_value(wcd->reset_gpio, 0);
 	msleep(20);
 
 	return 0;