diff mbox series

[v2,2/3] ASoC: codec: wcd938x: Convert to GPIO descriptors

Message ID 20250324-wcd-gpiod-v2-2-773f67ce3b56@nxp.com (mailing list archive)
State New
Headers show
Series ASoC: codec: wcd93xx: Convert to GPIO descriptors | expand

Commit Message

Peng Fan (OSS) March 24, 2025, 11:51 a.m. UTC 
From: Peng Fan <peng.fan@nxp.com>

of_gpio.h is deprecated, update the driver to use GPIO descriptors.
 - Use dev_gpiod_get to get GPIO descriptor.
 - Use gpiod_set_value to configure output value.

With legacy of_gpio API, the driver set gpio value 0 to assert reset,
and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
DTS, so set GPIOD_OUT_LOW when get GPIO descriptors, and set value 1 means
output low, set value 0 means output high with gpiod API.

The in-tree DTS files have the right polarity set up already so we
can expect this to "just work".

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 sound/soc/codecs/wcd938x.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

Comments

Steev Klimaszewski March 24, 2025, 3:38 p.m. UTC | #1 
Hi Peng,

On Mon, Mar 24, 2025 at 6:52 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote:
>
> From: Peng Fan <peng.fan@nxp.com>
>
> of_gpio.h is deprecated, update the driver to use GPIO descriptors.
>  - Use dev_gpiod_get to get GPIO descriptor.
>  - Use gpiod_set_value to configure output value.
>
> With legacy of_gpio API, the driver set gpio value 0 to assert reset,
> and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
> DTS, so set GPIOD_OUT_LOW when get GPIO descriptors, and set value 1 means
> output low, set value 0 means output high with gpiod API.
>
> The in-tree DTS files have the right polarity set up already so we
> can expect this to "just work".
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  sound/soc/codecs/wcd938x.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c
> index 1ae498c323912ed799dcc033e7777936d90c9284..955a0d3a77d7cb45932faa0c7a6f5060232d33b4 100644
> --- a/sound/soc/codecs/wcd938x.c
> +++ b/sound/soc/codecs/wcd938x.c
> @@ -11,7 +11,6 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/component.h>
>  #include <sound/tlv.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of.h>
>  #include <sound/jack.h>
>  #include <sound/pcm.h>
> @@ -171,7 +170,7 @@ struct wcd938x_priv {
>         int flyback_cur_det_disable;
>         int ear_rx_path;
>         int variant;
> -       int reset_gpio;
> +       struct gpio_desc *reset_gpio;
>         struct gpio_desc *us_euro_gpio;
>         u32 micb1_mv;
>         u32 micb2_mv;
> @@ -3251,9 +3250,9 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
>         struct wcd_mbhc_config *cfg = &wcd938x->mbhc_cfg;
>         int ret;
>
> -       wcd938x->reset_gpio = of_get_named_gpio(dev->of_node, "reset-gpios", 0);
> -       if (wcd938x->reset_gpio < 0)
> -               return dev_err_probe(dev, wcd938x->reset_gpio,
> +       wcd938x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> +       if (IS_ERR(wcd938x->reset_gpio))
> +               return dev_err_probe(dev, PTR_ERR(wcd938x->reset_gpio),
>                                      "Failed to get reset gpio\n");
>
>         wcd938x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro",
> @@ -3297,10 +3296,10 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
>
>  static int wcd938x_reset(struct wcd938x_priv *wcd938x)
>  {
> -       gpio_direction_output(wcd938x->reset_gpio, 0);
> +       gpiod_set_value(wcd938x->reset_gpio, 1);
>         /* 20us sleep required after pulling the reset gpio to LOW */
>         usleep_range(20, 30);
> -       gpio_set_value(wcd938x->reset_gpio, 1);
> +       gpiod_set_value(wcd938x->reset_gpio, 0);
>         /* 20us sleep required after pulling the reset gpio to HIGH */
>         usleep_range(20, 30);
>
>
> --
> 2.37.1
>
I can verify that with v2 applied, I do still have working audio on
the Thinkpad X13s.  Apologies for not replying earlier, it was
unfortunately my night time.  For the record though, I do not use the
firmware dtb files, but explicitly list the kernel that I am using
and/or testing to be used on each boot.

Tested-by: Steev Klimaszewski <steev@kali.org>

Thanks!
-- steev
Peng Fan March 25, 2025, 12:35 a.m. UTC | #2 
> Subject: Re: [PATCH v2 2/3] ASoC: codec: wcd938x: Convert to GPIO
> descriptors
> 

...
> >
> I can verify that with v2 applied, I do still have working audio on the
> Thinkpad X13s.  Apologies for not replying earlier, it was unfortunately
> my night time.  For the record though, I do not use the firmware dtb
> files, but explicitly list the kernel that I am using and/or testing to be
> used on each boot.
> 
> Tested-by: Steev Klimaszewski <steev@kali.org>

Appreciate for helping test.

Thanks,
Peng.

> 
> Thanks!
> -- steev
Bartosz Golaszewski March 27, 2025, 8:50 a.m. UTC | #3 
On Mon, Mar 24, 2025 at 12:52 PM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote:
>
> From: Peng Fan <peng.fan@nxp.com>
>
> of_gpio.h is deprecated, update the driver to use GPIO descriptors.
>  - Use dev_gpiod_get to get GPIO descriptor.
>  - Use gpiod_set_value to configure output value.
>
> With legacy of_gpio API, the driver set gpio value 0 to assert reset,
> and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
> DTS, so set GPIOD_OUT_LOW when get GPIO descriptors, and set value 1 means
> output low, set value 0 means output high with gpiod API.
>
> The in-tree DTS files have the right polarity set up already so we
> can expect this to "just work".
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
diff mbox series

Patch

diff --git a/sound/soc/codecs/wcd938x.c b/sound/soc/codecs/wcd938x.c
index 1ae498c323912ed799dcc033e7777936d90c9284..955a0d3a77d7cb45932faa0c7a6f5060232d33b4 100644
--- a/sound/soc/codecs/wcd938x.c
+++ b/sound/soc/codecs/wcd938x.c
@@ -11,7 +11,6 @@ 
 #include <linux/pm_runtime.h>
 #include <linux/component.h>
 #include <sound/tlv.h>
-#include <linux/of_gpio.h>
 #include <linux/of.h>
 #include <sound/jack.h>
 #include <sound/pcm.h>
@@ -171,7 +170,7 @@  struct wcd938x_priv {
 	int flyback_cur_det_disable;
 	int ear_rx_path;
 	int variant;
-	int reset_gpio;
+	struct gpio_desc *reset_gpio;
 	struct gpio_desc *us_euro_gpio;
 	u32 micb1_mv;
 	u32 micb2_mv;
@@ -3251,9 +3250,9 @@  static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
 	struct wcd_mbhc_config *cfg = &wcd938x->mbhc_cfg;
 	int ret;
 
-	wcd938x->reset_gpio = of_get_named_gpio(dev->of_node, "reset-gpios", 0);
-	if (wcd938x->reset_gpio < 0)
-		return dev_err_probe(dev, wcd938x->reset_gpio,
+	wcd938x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(wcd938x->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(wcd938x->reset_gpio),
 				     "Failed to get reset gpio\n");
 
 	wcd938x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro",
@@ -3297,10 +3296,10 @@  static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
 
 static int wcd938x_reset(struct wcd938x_priv *wcd938x)
 {
-	gpio_direction_output(wcd938x->reset_gpio, 0);
+	gpiod_set_value(wcd938x->reset_gpio, 1);
 	/* 20us sleep required after pulling the reset gpio to LOW */
 	usleep_range(20, 30);
-	gpio_set_value(wcd938x->reset_gpio, 1);
+	gpiod_set_value(wcd938x->reset_gpio, 0);
 	/* 20us sleep required after pulling the reset gpio to HIGH */
 	usleep_range(20, 30);