diff mbox series

[v6,4/7] ASoC: fsl_asrc: Support new property fsl,asrc-format

Message ID 496f49f1fe20b969f4456b591f62223d430c6d74.1585726761.git.shengjiu.wang@nxp.com (mailing list archive)
State New, archived
Headers show
Series ASoC: Add new module driver for new ASRC | expand

Commit Message

Shengjiu Wang April 1, 2020, 8:45 a.m. UTC 
In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, driver
can accept format from devicetree, don't need to convert it to
format through width.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_asrc.c     | 40 ++++++++++++++++++++++--------------
 sound/soc/fsl/fsl_asrc.h     |  4 ++--
 sound/soc/fsl/fsl_asrc_dma.c | 15 +++++++++++---
 3 files changed, 39 insertions(+), 20 deletions(-)

Comments

Nicolin Chen April 6, 2020, 11:19 p.m. UTC | #1 
Just some small comments.

On Wed, Apr 01, 2020 at 04:45:37PM +0800, Shengjiu Wang wrote:
> In order to align with new ESARC, we add new property fsl,asrc-format.
> The fsl,asrc-format can replace the fsl,asrc-width, driver
> can accept format from devicetree, don't need to convert it to
> format through width.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---
>  sound/soc/fsl/fsl_asrc.c     | 40 ++++++++++++++++++++++--------------
>  sound/soc/fsl/fsl_asrc.h     |  4 ++--
>  sound/soc/fsl/fsl_asrc_dma.c | 15 +++++++++++---
>  3 files changed, 39 insertions(+), 20 deletions(-)
> 
> diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> index 4d3e51bfa949..eea19e2b723b 100644
> --- a/sound/soc/fsl/fsl_asrc.c
> +++ b/sound/soc/fsl/fsl_asrc.c
> @@ -1052,16 +1047,31 @@ static int fsl_asrc_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> -	ret = of_property_read_u32(np, "fsl,asrc-width",
> -				   &asrc->asrc_width);
> +	ret = of_property_read_u32(np, "fsl,asrc-format", &asrc->asrc_format);
>  	if (ret) {
> -		dev_err(&pdev->dev, "failed to get output width\n");
> -		return ret;
> +		ret = of_property_read_u32(np, "fsl,asrc-width", &width);
> +		if (ret) {
> +			dev_err(&pdev->dev, "failed to get output width\n");

Similar to the comments against sound card driver:
"failed to decide output format"

> +			return ret;
> +		}
> +
> +		switch (width) {
> +		case 16:
> +			asrc->asrc_format = SNDRV_PCM_FORMAT_S16_LE;
> +			break;
> +		case 24:
> +			asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
> +			break;
> +		default:
> +			dev_warn(&pdev->dev, "unsupported width, switching to 24bit\n");

Should match what the code does after the change:
+			dev_warn(&pdev->dev,
+				 "unsupported width, use default S24_LE\n");

> +			asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
> +			break;
> +		}
>  	}
>  
> -	if (asrc->asrc_width != 16 && asrc->asrc_width != 24) {
> -		dev_warn(&pdev->dev, "unsupported width, switching to 24bit\n");
> -		asrc->asrc_width = 24;
> +	if (!(FSL_ASRC_FORMATS & (1ULL << asrc->asrc_format))) {
> +		dev_warn(&pdev->dev, "unsupported format, switching to S24_LE\n");

Could fit 80 characters:
+		dev_warn(&pdev->dev, "unsupported width, use default S24_LE\n");

> diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
> index 5fe83aece25b..b15946e03380 100644
> --- a/sound/soc/fsl/fsl_asrc_dma.c
> +++ b/sound/soc/fsl/fsl_asrc_dma.c
> @@ -230,10 +230,19 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
>  		return -EINVAL;
>  	}
>  
> -	if (asrc->asrc_width == 16)
> +	bits = snd_pcm_format_physical_width(asrc->asrc_format);

Can we just use 'width' to match the function name?
diff mbox series

Patch

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 4d3e51bfa949..eea19e2b723b 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -589,7 +589,6 @@  static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
 	unsigned int channels = params_channels(params);
 	unsigned int rate = params_rate(params);
 	struct asrc_config config;
-	snd_pcm_format_t format;
 	int ret;
 
 	ret = fsl_asrc_request_pair(channels, pair);
@@ -600,11 +599,6 @@  static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
 
 	pair->config = &config;
 
-	if (asrc->asrc_width == 16)
-		format = SNDRV_PCM_FORMAT_S16_LE;
-	else
-		format = SNDRV_PCM_FORMAT_S24_LE;
-
 	config.pair = pair->index;
 	config.channel_num = channels;
 	config.inclk = INCLK_NONE;
@@ -612,11 +606,11 @@  static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		config.input_format   = params_format(params);
-		config.output_format  = format;
+		config.output_format  = asrc->asrc_format;
 		config.input_sample_rate  = rate;
 		config.output_sample_rate = asrc->asrc_rate;
 	} else {
-		config.input_format   = format;
+		config.input_format   = asrc->asrc_format;
 		config.output_format  = params_format(params);
 		config.input_sample_rate  = asrc->asrc_rate;
 		config.output_sample_rate = rate;
@@ -946,6 +940,7 @@  static int fsl_asrc_probe(struct platform_device *pdev)
 	int irq, ret, i;
 	u32 map_idx;
 	char tmp[16];
+	u32 width;
 
 	asrc = devm_kzalloc(&pdev->dev, sizeof(*asrc), GFP_KERNEL);
 	if (!asrc)
@@ -1052,16 +1047,31 @@  static int fsl_asrc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = of_property_read_u32(np, "fsl,asrc-width",
-				   &asrc->asrc_width);
+	ret = of_property_read_u32(np, "fsl,asrc-format", &asrc->asrc_format);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to get output width\n");
-		return ret;
+		ret = of_property_read_u32(np, "fsl,asrc-width", &width);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get output width\n");
+			return ret;
+		}
+
+		switch (width) {
+		case 16:
+			asrc->asrc_format = SNDRV_PCM_FORMAT_S16_LE;
+			break;
+		case 24:
+			asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
+			break;
+		default:
+			dev_warn(&pdev->dev, "unsupported width, switching to 24bit\n");
+			asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
+			break;
+		}
 	}
 
-	if (asrc->asrc_width != 16 && asrc->asrc_width != 24) {
-		dev_warn(&pdev->dev, "unsupported width, switching to 24bit\n");
-		asrc->asrc_width = 24;
+	if (!(FSL_ASRC_FORMATS & (1ULL << asrc->asrc_format))) {
+		dev_warn(&pdev->dev, "unsupported format, switching to S24_LE\n");
+		asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
 	}
 
 	platform_set_drvdata(pdev, asrc);
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index 95d62c45afde..3b0f156af2c3 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -493,7 +493,7 @@  struct fsl_asrc_pair {
  * @channel_avail: non-occupied channel numbers
  * @clk_map: clock map for input/output clock
  * @asrc_rate: default sample rate for ASoC Back-Ends
- * @asrc_width: default sample width for ASoC Back-Ends
+ * @asrc_format: default sample format for ASoC Back-Ends
  * @regcache_cfg: store register value of REG_ASRCFG
  */
 struct fsl_asrc {
@@ -514,7 +514,7 @@  struct fsl_asrc {
 	unsigned char *clk_map[2];
 
 	int asrc_rate;
-	int asrc_width;
+	snd_pcm_format_t asrc_format;
 
 	u32 regcache_cfg;
 };
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index 5fe83aece25b..b15946e03380 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -146,7 +146,7 @@  static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 	struct device *dev_be;
 	u8 dir = tx ? OUT : IN;
 	dma_cap_mask_t mask;
-	int ret;
+	int ret, bits;
 
 	/* Fetch the Back-End dma_data from DPCM */
 	for_each_dpcm_be(rtd, stream, dpcm) {
@@ -230,10 +230,19 @@  static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
 		return -EINVAL;
 	}
 
-	if (asrc->asrc_width == 16)
+	bits = snd_pcm_format_physical_width(asrc->asrc_format);
+	if (bits < 8 || bits > 64)
+		return -EINVAL;
+	else if (bits == 8)
+		buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	else if (bits == 16)
 		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
-	else
+	else if (bits == 24)
+		buswidth = DMA_SLAVE_BUSWIDTH_3_BYTES;
+	else if (bits <= 32)
 		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	else
+		buswidth = DMA_SLAVE_BUSWIDTH_8_BYTES;
 
 	config_be.direction = DMA_DEV_TO_DEV;
 	config_be.src_addr_width = buswidth;