@@ -1,25 +1,15 @@
config SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
depends on PLAT_SAMSUNG
- select S3C2410_DMA if ARCH_S3C24XX
select S3C64XX_PL080 if ARCH_S3C64XX
- select SND_S3C_DMA if !ARCH_S3C24XX
- select SND_S3C_DMA_LEGACY if ARCH_S3C24XX
select SND_SOC_GENERIC_DMAENGINE_PCM if !ARCH_S3C24XX
help
Say Y or M if you want to add support for codecs attached to
the Samsung SoCs' Audio interfaces. You will also need to
select the audio interfaces to support below.
-config SND_S3C_DMA
- tristate
-
-config SND_S3C_DMA_LEGACY
- tristate
-
config SND_S3C24XX_I2S
tristate
- select S3C24XX_DMA
config SND_S3C_I2SV2_SOC
tristate
@@ -27,7 +17,6 @@ config SND_S3C_I2SV2_SOC
config SND_S3C2412_SOC_I2S
tristate
select SND_S3C_I2SV2_SOC
- select S3C2410_DMA
config SND_SAMSUNG_PCM
tristate
@@ -83,7 +72,6 @@ config SND_SOC_SAMSUNG_SMDK_WM8994
config SND_SOC_SAMSUNG_SMDK2443_WM9710
tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
depends on SND_SOC_SAMSUNG && MACH_SMDK2443
- select S3C2410_DMA
select AC97_BUS
select SND_SOC_AC97_CODEC
select SND_SAMSUNG_AC97
@@ -94,7 +82,6 @@ config SND_SOC_SAMSUNG_SMDK2443_WM9710
config SND_SOC_SAMSUNG_LN2440SBC_ALC650
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
- select S3C2410_DMA
select AC97_BUS
select SND_SOC_AC97_CODEC
select SND_SAMSUNG_AC97
@@ -1,6 +1,5 @@
# S3c24XX Platform Support
snd-soc-s3c-dma-objs := dmaengine.o
-snd-soc-s3c-dma-legacy-objs := dma.o
snd-soc-idma-objs := idma.o
snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
@@ -10,8 +9,7 @@ snd-soc-samsung-spdif-objs := spdif.o
snd-soc-pcm-objs := pcm.o
snd-soc-i2s-objs := i2s.o
-obj-$(CONFIG_SND_S3C_DMA) += snd-soc-s3c-dma.o
-obj-$(CONFIG_SND_S3C_DMA_LEGACY) += snd-soc-s3c-dma-legacy.o
+obj-$(CONFIG_SND_SOC_SAMSUNG) += snd-soc-s3c-dma.o
obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o
obj-$(CONFIG_SND_SAMSUNG_AC97) += snd-soc-ac97.o
obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
@@ -225,9 +225,6 @@ static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
u32 ac_glbctrl;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct s3c_dma_params *dma_data =
- snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
@@ -253,11 +250,6 @@ static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
- if (!dma_data->ops)
- dma_data->ops = samsung_dma_get_ops();
-
- dma_data->ops->started(dma_data->channel);
-
return 0;
}
@@ -265,9 +257,6 @@ static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
int cmd, struct snd_soc_dai *dai)
{
u32 ac_glbctrl;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct s3c_dma_params *dma_data =
- snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
ac_glbctrl &= ~S3C_AC97_GLBCTRL_MICINTM_MASK;
@@ -287,11 +276,6 @@ static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
- if (!dma_data->ops)
- dma_data->ops = samsung_dma_get_ops();
-
- dma_data->ops->started(dma_data->channel);
-
return 0;
}
deleted file mode 100644
@@ -1,454 +0,0 @@
-/*
- * dma.c -- ALSA Soc Audio Layer
- *
- * (c) 2006 Wolfson Microelectronics PLC.
- * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- * Copyright 2004-2005 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/module.h>
-
-#include <sound/soc.h>
-#include <sound/pcm_params.h>
-
-#include <asm/dma.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-#include "dma.h"
-
-#define ST_RUNNING (1<<0)
-#define ST_OPENED (1<<1)
-
-static const struct snd_pcm_hardware dma_hardware = {
- .info = SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID,
- .buffer_bytes_max = 128*1024,
- .period_bytes_min = PAGE_SIZE,
- .period_bytes_max = PAGE_SIZE*2,
- .periods_min = 2,
- .periods_max = 128,
- .fifo_size = 32,
-};
-
-struct runtime_data {
- spinlock_t lock;
- int state;
- unsigned int dma_loaded;
- unsigned int dma_period;
- dma_addr_t dma_start;
- dma_addr_t dma_pos;
- dma_addr_t dma_end;
- struct s3c_dma_params *params;
-};
-
-static void audio_buffdone(void *data);
-
-/* dma_enqueue
- *
- * place a dma buffer onto the queue for the dma system
- * to handle.
- */
-static void dma_enqueue(struct snd_pcm_substream *substream)
-{
- struct runtime_data *prtd = substream->runtime->private_data;
- dma_addr_t pos = prtd->dma_pos;
- unsigned int limit;
- struct samsung_dma_prep dma_info;
-
- pr_debug("Entered %s\n", __func__);
-
- limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
-
- pr_debug("%s: loaded %d, limit %d\n",
- __func__, prtd->dma_loaded, limit);
-
- dma_info.cap = (samsung_dma_has_circular() ? DMA_CYCLIC : DMA_SLAVE);
- dma_info.direction =
- (substream->stream == SNDRV_PCM_STREAM_PLAYBACK
- ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM);
- dma_info.fp = audio_buffdone;
- dma_info.fp_param = substream;
- dma_info.period = prtd->dma_period;
- dma_info.len = prtd->dma_period*limit;
-
- if (dma_info.cap == DMA_CYCLIC) {
- dma_info.buf = pos;
- prtd->params->ops->prepare(prtd->params->ch, &dma_info);
- prtd->dma_loaded += limit;
- return;
- }
-
- while (prtd->dma_loaded < limit) {
- pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
-
- if ((pos + dma_info.period) > prtd->dma_end) {
- dma_info.period = prtd->dma_end - pos;
- pr_debug("%s: corrected dma len %ld\n",
- __func__, dma_info.period);
- }
-
- dma_info.buf = pos;
- prtd->params->ops->prepare(prtd->params->ch, &dma_info);
-
- prtd->dma_loaded++;
- pos += prtd->dma_period;
- if (pos >= prtd->dma_end)
- pos = prtd->dma_start;
- }
-
- prtd->dma_pos = pos;
-}
-
-static void audio_buffdone(void *data)
-{
- struct snd_pcm_substream *substream = data;
- struct runtime_data *prtd = substream->runtime->private_data;
-
- pr_debug("Entered %s\n", __func__);
-
- if (prtd->state & ST_RUNNING) {
- prtd->dma_pos += prtd->dma_period;
- if (prtd->dma_pos >= prtd->dma_end)
- prtd->dma_pos = prtd->dma_start;
-
- if (substream)
- snd_pcm_period_elapsed(substream);
-
- spin_lock(&prtd->lock);
- if (!samsung_dma_has_circular()) {
- prtd->dma_loaded--;
- dma_enqueue(substream);
- }
- spin_unlock(&prtd->lock);
- }
-}
-
-static int dma_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct runtime_data *prtd = runtime->private_data;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- unsigned long totbytes = params_buffer_bytes(params);
- struct s3c_dma_params *dma =
- snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
- struct samsung_dma_req req;
- struct samsung_dma_config config;
-
- pr_debug("Entered %s\n", __func__);
-
- /* return if this is a bufferless transfer e.g.
- * codec <--> BT codec or GSM modem -- lg FIXME */
- if (!dma)
- return 0;
-
- /* this may get called several times by oss emulation
- * with different params -HW */
- if (prtd->params == NULL) {
- /* prepare DMA */
- prtd->params = dma;
-
- pr_debug("params %p, client %p, channel %d\n", prtd->params,
- prtd->params->client, prtd->params->channel);
-
- prtd->params->ops = samsung_dma_get_ops();
-
- req.cap = (samsung_dma_has_circular() ?
- DMA_CYCLIC : DMA_SLAVE);
- req.client = prtd->params->client;
- config.direction =
- (substream->stream == SNDRV_PCM_STREAM_PLAYBACK
- ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM);
- config.width = prtd->params->dma_size;
- config.fifo = prtd->params->dma_addr;
- prtd->params->ch = prtd->params->ops->request(
- prtd->params->channel, &req, rtd->cpu_dai->dev,
- prtd->params->ch_name);
- if (!prtd->params->ch) {
- pr_err("Failed to allocate DMA channel\n");
- return -ENXIO;
- }
- prtd->params->ops->config(prtd->params->ch, &config);
- }
-
- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
-
- runtime->dma_bytes = totbytes;
-
- spin_lock_irq(&prtd->lock);
- prtd->dma_loaded = 0;
- prtd->dma_period = params_period_bytes(params);
- prtd->dma_start = runtime->dma_addr;
- prtd->dma_pos = prtd->dma_start;
- prtd->dma_end = prtd->dma_start + totbytes;
- spin_unlock_irq(&prtd->lock);
-
- return 0;
-}
-
-static int dma_hw_free(struct snd_pcm_substream *substream)
-{
- struct runtime_data *prtd = substream->runtime->private_data;
-
- pr_debug("Entered %s\n", __func__);
-
- snd_pcm_set_runtime_buffer(substream, NULL);
-
- if (prtd->params) {
- prtd->params->ops->flush(prtd->params->ch);
- prtd->params->ops->release(prtd->params->ch,
- prtd->params->client);
- prtd->params = NULL;
- }
-
- return 0;
-}
-
-static int dma_prepare(struct snd_pcm_substream *substream)
-{
- struct runtime_data *prtd = substream->runtime->private_data;
- int ret = 0;
-
- pr_debug("Entered %s\n", __func__);
-
- /* return if this is a bufferless transfer e.g.
- * codec <--> BT codec or GSM modem -- lg FIXME */
- if (!prtd->params)
- return 0;
-
- /* flush the DMA channel */
- prtd->params->ops->flush(prtd->params->ch);
-
- prtd->dma_loaded = 0;
- prtd->dma_pos = prtd->dma_start;
-
- /* enqueue dma buffers */
- dma_enqueue(substream);
-
- return ret;
-}
-
-static int dma_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct runtime_data *prtd = substream->runtime->private_data;
- int ret = 0;
-
- pr_debug("Entered %s\n", __func__);
-
- spin_lock(&prtd->lock);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- prtd->state |= ST_RUNNING;
- prtd->params->ops->trigger(prtd->params->ch);
- break;
-
- case SNDRV_PCM_TRIGGER_STOP:
- prtd->state &= ~ST_RUNNING;
- prtd->params->ops->stop(prtd->params->ch);
- break;
-
- default:
- ret = -EINVAL;
- break;
- }
-
- spin_unlock(&prtd->lock);
-
- return ret;
-}
-
-static snd_pcm_uframes_t
-dma_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct runtime_data *prtd = runtime->private_data;
- unsigned long res;
-
- pr_debug("Entered %s\n", __func__);
-
- res = prtd->dma_pos - prtd->dma_start;
-
- pr_debug("Pointer offset: %lu\n", res);
-
- /* we seem to be getting the odd error from the pcm library due
- * to out-of-bounds pointers. this is maybe due to the dma engine
- * not having loaded the new values for the channel before being
- * called... (todo - fix )
- */
-
- if (res >= snd_pcm_lib_buffer_bytes(substream)) {
- if (res == snd_pcm_lib_buffer_bytes(substream))
- res = 0;
- }
-
- return bytes_to_frames(substream->runtime, res);
-}
-
-static int dma_open(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct runtime_data *prtd;
-
- pr_debug("Entered %s\n", __func__);
-
- snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
- snd_soc_set_runtime_hwparams(substream, &dma_hardware);
-
- prtd = kzalloc(sizeof(struct runtime_data), GFP_KERNEL);
- if (prtd == NULL)
- return -ENOMEM;
-
- spin_lock_init(&prtd->lock);
-
- runtime->private_data = prtd;
- return 0;
-}
-
-static int dma_close(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct runtime_data *prtd = runtime->private_data;
-
- pr_debug("Entered %s\n", __func__);
-
- if (!prtd)
- pr_debug("dma_close called with prtd == NULL\n");
-
- kfree(prtd);
-
- return 0;
-}
-
-static int dma_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *vma)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- pr_debug("Entered %s\n", __func__);
-
- return dma_mmap_writecombine(substream->pcm->card->dev, vma,
- runtime->dma_area,
- runtime->dma_addr,
- runtime->dma_bytes);
-}
-
-static struct snd_pcm_ops dma_ops = {
- .open = dma_open,
- .close = dma_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = dma_hw_params,
- .hw_free = dma_hw_free,
- .prepare = dma_prepare,
- .trigger = dma_trigger,
- .pointer = dma_pointer,
- .mmap = dma_mmap,
-};
-
-static int preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-{
- struct snd_pcm_substream *substream = pcm->streams[stream].substream;
- struct snd_dma_buffer *buf = &substream->dma_buffer;
- size_t size = dma_hardware.buffer_bytes_max;
-
- pr_debug("Entered %s\n", __func__);
-
- buf->dev.type = SNDRV_DMA_TYPE_DEV;
- buf->dev.dev = pcm->card->dev;
- buf->private_data = NULL;
- buf->area = dma_alloc_writecombine(pcm->card->dev, size,
- &buf->addr, GFP_KERNEL);
- if (!buf->area)
- return -ENOMEM;
- buf->bytes = size;
- return 0;
-}
-
-static void dma_free_dma_buffers(struct snd_pcm *pcm)
-{
- struct snd_pcm_substream *substream;
- struct snd_dma_buffer *buf;
- int stream;
-
- pr_debug("Entered %s\n", __func__);
-
- for (stream = 0; stream < 2; stream++) {
- substream = pcm->streams[stream].substream;
- if (!substream)
- continue;
-
- buf = &substream->dma_buffer;
- if (!buf->area)
- continue;
-
- dma_free_writecombine(pcm->card->dev, buf->bytes,
- buf->area, buf->addr);
- buf->area = NULL;
- }
-}
-
-static int dma_new(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_card *card = rtd->card->snd_card;
- struct snd_pcm *pcm = rtd->pcm;
- int ret;
-
- pr_debug("Entered %s\n", __func__);
-
- ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
- if (ret)
- return ret;
-
- if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
- ret = preallocate_dma_buffer(pcm,
- SNDRV_PCM_STREAM_PLAYBACK);
- if (ret)
- goto out;
- }
-
- if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
- ret = preallocate_dma_buffer(pcm,
- SNDRV_PCM_STREAM_CAPTURE);
- if (ret)
- goto out;
- }
-out:
- return ret;
-}
-
-static struct snd_soc_platform_driver samsung_asoc_platform = {
- .ops = &dma_ops,
- .pcm_new = dma_new,
- .pcm_free = dma_free_dma_buffers,
-};
-
-void samsung_asoc_init_dma_data(struct snd_soc_dai *dai,
- struct s3c_dma_params *playback,
- struct s3c_dma_params *capture)
-{
- snd_soc_dai_init_dma_data(dai, playback, capture);
-}
-EXPORT_SYMBOL_GPL(samsung_asoc_init_dma_data);
-
-int samsung_asoc_dma_platform_register(struct device *dev)
-{
- return devm_snd_soc_register_platform(dev, &samsung_asoc_platform);
-}
-EXPORT_SYMBOL_GPL(samsung_asoc_dma_platform_register);
-
-MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung ASoC DMA Driver");
-MODULE_LICENSE("GPL");
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/amba/pl08x.h>
+#include <linux/platform_data/dma-s3c24xx.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -29,6 +30,8 @@
#ifdef CONFIG_ARCH_S3C64XX
#define filter_fn pl08x_filter_id
+#elif defined(CONFIG_ARCH_S3C24XX)
+#define filter_fn s3c24xx_dma_filter
#else
#define filter_fn NULL
#endif
@@ -290,7 +290,6 @@ static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
else
s3c24xx_snd_txctrl(1);
- s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
The s3c24xx sound support keeps giving randconfig build errors, this is a new attempt to solve it by moving the driver over to use dmaengine exclusively. The removal of the legacy DMA support and the addition of the s3c24xx_dma_filter pointer are fairly obvious here. The part I'm not completely sure about is the removal of the s3c2410_dma_ctrl(..., S3C2410_DMAOP_STARTED) and dma_data->ops->started() calls. My understanding is that these are only required for drivers that do not support cyclic transfers, which the new dma engine driver now does, so we can simply remove them. This would also fix at least one bug in the ac97 driver on newer machines, which currently gives us a NULL pointer dereference from trying to call dma_data->ops->started(). Any insights about this, or testing would be very welcome. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org --- sound/soc/samsung/Kconfig | 13 -- sound/soc/samsung/Makefile | 4 +- sound/soc/samsung/ac97.c | 16 -- sound/soc/samsung/dma.c | 454 ------------------------------------ sound/soc/samsung/dmaengine.c | 3 + sound/soc/samsung/s3c24xx-i2s.c | 1 - 6 files changed, 4 insertions(+), 487 deletions(-)