| Message ID | 87y3tyh7cj.wl%kuninori.morimoto.gx@renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Morimoto-san, On 2017-05-15 08:11:21 +0000, Kuninori Morimoto wrote: > From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> > > "renesas,rsrc-card" is exchanged to "simple-scu-audio-card". > Let's update Document > > Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> > --- > v1 -> v2 > > - simple-scu-card -> simple-scu-audio-card on git log Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > .../devicetree/bindings/sound/renesas,rsnd.txt | 30 +++++++++++----------- > 1 file changed, 15 insertions(+), 15 deletions(-) > > diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt > index 15a7316..3332910 100644 > --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt > +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt > @@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes > ** Asynchronous mode > ------------------ > > -You need to use "renesas,rsrc-card" sound card for it. > +You need to use "simple-scu-audio-card" sound card for it. > example) > > sound { > - compatible = "renesas,rsrc-card"; > + compatible = "simple-scu-audio-card"; > ... > /* > * SRC Asynchronous mode setting > @@ -97,12 +97,12 @@ example) > * Inputed 48kHz data will be converted to > * system specified Hz > */ > - convert-rate = <48000>; > + simple-audio-card,convert-rate = <48000>; > ... > - cpu { > + simple-audio-card,cpu { > sound-dai = <&rcar_sound>; > }; > - codec { > + simple-audio-card,codec { > ... > }; > }; > @@ -141,23 +141,23 @@ For more detail information, see below > ${LINUX}/sound/soc/sh/rcar/ctu.c > - comment of header > > -You need to use "renesas,rsrc-card" sound card for it. > +You need to use "simple-scu-audio-card" sound card for it. > example) > > sound { > - compatible = "renesas,rsrc-card"; > + compatible = "simple-scu-audio-card"; > ... > /* > * CTU setting > * All input data will be converted to 2ch > * as output data > */ > - convert-channels = <2>; > + simple-audio-card,convert-channels = <2>; > ... > - cpu { > + simple-audio-card,cpu { > sound-dai = <&rcar_sound>; > }; > - codec { > + simple-audio-card,codec { > ... > }; > }; > @@ -190,22 +190,22 @@ and these sounds will be merged by MIX. > aplay -D plughw:0,0 xxxx.wav & > aplay -D plughw:0,1 yyyy.wav > > -You need to use "renesas,rsrc-card" sound card for it. > +You need to use "simple-scu-audio-card" sound card for it. > Ex) > [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0] > | > [MEM] -> [SRC2] -> [CTU03] -+ > > sound { > - compatible = "renesas,rsrc-card"; > + compatible = "simple-scu-audio-card"; > ... > - cpu@0 { > + simple-audio-card,cpu@0 { > sound-dai = <&rcar_sound 0>; > }; > - cpu@1 { > + simple-audio-card,cpu@1 { > sound-dai = <&rcar_sound 1>; > }; > - codec { > + simple-audio-card,codec { > ... > }; > }; > -- > 1.9.1 >
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 15a7316..3332910 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes ** Asynchronous mode ------------------ -You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. example) sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... /* * SRC Asynchronous mode setting @@ -97,12 +97,12 @@ example) * Inputed 48kHz data will be converted to * system specified Hz */ - convert-rate = <48000>; + simple-audio-card,convert-rate = <48000>; ... - cpu { + simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; - codec { + simple-audio-card,codec { ... }; }; @@ -141,23 +141,23 @@ For more detail information, see below ${LINUX}/sound/soc/sh/rcar/ctu.c - comment of header -You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. example) sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... /* * CTU setting * All input data will be converted to 2ch * as output data */ - convert-channels = <2>; + simple-audio-card,convert-channels = <2>; ... - cpu { + simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; - codec { + simple-audio-card,codec { ... }; }; @@ -190,22 +190,22 @@ and these sounds will be merged by MIX. aplay -D plughw:0,0 xxxx.wav & aplay -D plughw:0,1 yyyy.wav -You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. Ex) [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0] | [MEM] -> [SRC2] -> [CTU03] -+ sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... - cpu@0 { + simple-audio-card,cpu@0 { sound-dai = <&rcar_sound 0>; }; - cpu@1 { + simple-audio-card,cpu@1 { sound-dai = <&rcar_sound 1>; }; - codec { + simple-audio-card,codec { ... }; };