diff mbox

[09/14] dt-bindings: sound: Add sun8i codec documentation

Message ID a5b0bdc6b50dfcc2dc0145d00edd08fee3ce7764.1475571575.git.mylene.josserand@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mylene JOSSERAND Oct. 4, 2016, 9:46 a.m. UTC
Add the documentation for dt-binding of the digital audio codec driver
for sun8i SoC.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
 .../devicetree/bindings/sound/sun8i-codec.txt      | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/sun8i-codec.txt

Comments

Maxime Ripard Oct. 4, 2016, 4:19 p.m. UTC | #1
On Tue, Oct 04, 2016 at 11:46:22AM +0200, Mylène Josserand wrote:
> Add the documentation for dt-binding of the digital audio codec driver
> for sun8i SoC.
> 
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> ---
>  .../devicetree/bindings/sound/sun8i-codec.txt      | 24 ++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/sun8i-codec.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-codec.txt
> new file mode 100644
> index 0000000..1808869
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/sun8i-codec.txt
> @@ -0,0 +1,24 @@
> +* Allwinner A23/A33 Codec
> +
> +Required properties:
> +- compatible: must be either "allwinner,sun4i-a23-codec" or
> +  "allwinner,sun7i-a33-codec"

Copy and paste issue ? :)

One compatible by line is usually favored, since when you'll add new
compatibles, you don't have to modify the context.xs

> +- reg: must contain the registers location and length
> +- interrupts: must contain the codec interrupt
> +- clocks: a list of phandle + clock-specifer pairs, one for each entry
> +  in clock-names.
> +- clock-names: should contain followings:
> +   - "apb": the parent APB clock for this controller
> +   - "codec": the parent module clock

We're usually calling them "bus" and "mod".

> +
> +Example:
> +codec: codec@01c22e00 {
> +	#sound-dai-cells = <0>;
> +	compatible = "allwinner,sun8i-a33-codec";
> +	reg = <0x01c22e00 0x400>; /* SUNXI_AUDIO_PBASE + 0x200 */
> +	reg-names = "audio";

You don't define reg-names in your bindings, while your code relies on
it. It isn't really needed, since you have only one couple of base +
size, so it should just go away.

Thanks!
Maxime
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-codec.txt
new file mode 100644
index 0000000..1808869
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sun8i-codec.txt
@@ -0,0 +1,24 @@ 
+* Allwinner A23/A33 Codec
+
+Required properties:
+- compatible: must be either "allwinner,sun4i-a23-codec" or
+  "allwinner,sun7i-a33-codec"
+- reg: must contain the registers location and length
+- interrupts: must contain the codec interrupt
+- clocks: a list of phandle + clock-specifer pairs, one for each entry
+  in clock-names.
+- clock-names: should contain followings:
+   - "apb": the parent APB clock for this controller
+   - "codec": the parent module clock
+
+Example:
+codec: codec@01c22e00 {
+	#sound-dai-cells = <0>;
+	compatible = "allwinner,sun8i-a33-codec";
+	reg = <0x01c22e00 0x400>; /* SUNXI_AUDIO_PBASE + 0x200 */
+	reg-names = "audio";
+	interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+	clock-names = "apb", "codec";
+	status = "disabled";
+};