From patchwork Wed Jan 25 16:13:18 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Austin, Brian" X-Patchwork-Id: 9537407 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 7054F6042C for ; Wed, 25 Jan 2017 16:13:38 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 5EDBC27D85 for ; Wed, 25 Jan 2017 16:13:38 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 51E3627E22; Wed, 25 Jan 2017 16:13:38 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.9 required=2.0 tests=BAYES_00, RCVD_IN_DNSWL_NONE autolearn=ham version=3.3.1 Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 5308627D85 for ; Wed, 25 Jan 2017 16:13:36 +0000 (UTC) Received: by alsa0.perex.cz (Postfix, from userid 1000) id E9F9E266ED5; Wed, 25 Jan 2017 17:13:34 +0100 (CET) Received: from alsa0.perex.cz (localhost [127.0.0.1]) by alsa0.perex.cz (Postfix) with ESMTP id 89E69265A82; Wed, 25 Jan 2017 17:11:15 +0100 (CET) X-Original-To: alsa-devel@alsa-project.org Delivered-To: alsa-devel@alsa-project.org Received: by alsa0.perex.cz (Postfix, from userid 1000) id 10D97266D25; Wed, 25 Jan 2017 17:11:05 +0100 (CET) Received: from mx0b-001ae601.pphosted.com (mx0a-001ae601.pphosted.com [67.231.149.25]) by alsa0.perex.cz (Postfix) with ESMTP id 07C73265A82 for ; Wed, 25 Jan 2017 17:11:02 +0100 (CET) Received: from pps.filterd (m0077473.ppops.net [127.0.0.1]) by mx0a-001ae601.pphosted.com (8.16.0.20/8.16.0.20) with SMTP id v0PG4bu4031486; Wed, 25 Jan 2017 10:11:01 -0600 Authentication-Results: ppops.net; spf=pass smtp.mailfrom=Brian.Austin@cirrus.com Received: from mail2.cirrus.com (mail1.cirrus.com [141.131.3.20]) by mx0a-001ae601.pphosted.com with ESMTP id 2845x3ynt8-1; Wed, 25 Jan 2017 10:11:01 -0600 Received: from ex3.ad.cirrus.com (ex3.ad.cirrus.com [141.131.36.34]) by mail2.cirrus.com (Postfix) with ESMTP id A01C76121ADD; Wed, 25 Jan 2017 10:11:00 -0600 (CST) Received: from localhost (141.131.38.212) by InternalRelay (141.131.36.34) with Microsoft SMTP Server id 14.3.301.0; Wed, 25 Jan 2017 10:10:59 -0600 From: Brian Austin To: , Date: Wed, 25 Jan 2017 10:13:18 -0600 X-Mailer: git-send-email 1.9.1 In-Reply-To: <1485360798-15523-1-git-send-email-brian.austin@cirrus.com> References: <1485360798-15523-1-git-send-email-brian.austin@cirrus.com> MIME-Version: 1.0 Message-ID: X-Proofpoint-SPF-Result: pass X-Proofpoint-SPF-Record: v=spf1 include:spf-001ae601.pphosted.com ip4:141.131.128.20 ip4:141.131.3.20 ip4:213.128.236.230 ip4:87.246.98.25 ip4:87.246.78.26 ip4:87.246.76.56 ip4:87.246.98.35 -all X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 priorityscore=1501 malwarescore=0 suspectscore=0 phishscore=0 bulkscore=0 spamscore=0 clxscore=1015 lowpriorityscore=0 impostorscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1612050000 definitions=main-1701250154 Cc: mark.rutland@arm.com, Brian Austin , lgirdwood@gmail.com, robh+dt@kernel.org, broonie@kernel.org, ckeepax@opensource.wolfsonmicro.com Subject: [alsa-devel] [PATCH v4 2/2] ASoc: Add devictree bindings for CS35L35 CODEC X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org X-Virus-Scanned: ClamAV using ClamSMTP Add devicetree bindings documentatin for Cirrus Logic CS35L35 Boosted Amplifier Signed-off-by: Brian Austin --- .../devicetree/bindings/sound/cs35l35.txt | 171 +++++++++++++++++++++ 1 file changed, 171 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cs35l35.txt diff --git a/Documentation/devicetree/bindings/sound/cs35l35.txt b/Documentation/devicetree/bindings/sound/cs35l35.txt new file mode 100644 index 0000000..8a93b1b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs35l35.txt @@ -0,0 +1,171 @@ +CS35L35 Speaker Amplifier + +Required properties: + + - compatible : "cirrus,cs35l35" + + - reg : the I2C address of the device for I2C + + - VA-supply, VP-supply : power supplies for the device, + as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + + - interrupt-parent : Specifies the phandle of the interrupt controller to + which the IRQs from CS35L35 are delivered to. + - interrupts : IRQ line info CS35L35. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + for further information relating to interrupt properties) + +Optional properties: + - reset-gpios : gpio used to reset the amplifier + + - cirrus,stereo-config : Boolean to determine if there are 2 AMPs for a + Stereo configuration + + - cirrus,audio-channel : Set Location of Audio Signal on Serial Port + 0 = Data Packet received on Left I2S Channel + 1 = Data Packet received on Right I2S Channel + + - cirrus,advisory-channel : Set Location of Advisory Signal on Serial Port + 0 = Data Packet received on Left I2S Channel + 1 = Data Packet received on Right I2S Channel + + - cirrus,shared-boost : Boolean to enable ClassH tracking of Advisory Signal + if 2 Devices share Boost BST_CTL + + - cirrus,sp-drv-strength : Value for setting the Serial Port drive strength + Table 3-10 of the datasheet lists drive-strength specifications + 0 = 1x (Default) + 1 = .5x + + - cirrus,bst-pdn-fet-on : Boolean to determine if the Boost PDN control + powers down with a rectification FET On or Off. If VSPK is supplied + externally then FET is off. + + - cirrus,boost-ctl : Boost Converter control word. + Step Size: 100 + 0x00 = (Default) VP + Range is 0x01...0x41 + + - cirrus,boost-ipk : Boost-converter peak current limit. + Configures the peak current by monitoring the current through the boost FET. + Step size: 112 + 0x07 = (Default) 2.46 Amps + Range is 0x00...0x19 + + - cirrus,amp-gain-zc : Boolean to determine if to use Amplifier gain-change + zero-cross + +Optional H/G Algorithm sub-node: + + The cs35l35 node can have a single "cirrus,classh-internal-algo" sub-node + that will disable automatic control of the internal H/G Algorithm. + + It is strongly recommended that the Datasheet be referenced when adjusting + or using these Class H Algorithm controls over the internal Algorithm. + Serious damage can occur to the Device and surrounding components. + + - cirrus,classh-internal-algo : Sub-node for the Internal Class H Algorithm + See Section 4.3 Internal Class H Algorithm in the Datasheet. + If not used, the device manages the ClassH Algorithm internally. + +Optional properties for the "cirrus,classh-internal-algo" Sub-node + + Section 7.29 Class H Control + - cirrus,classh-bst-overide : Boolean + - cirrus,classh-bst-max-limit + - cirrus,classh-mem-depth + + Section 7.30 Class H Headroom Control + - cirrus,classh-headroom + + Section 7.31 Class H Release Rate + - cirrus,classh-release-rate + + Section 7.32 Class H Weak FET Drive Control + - cirrus,classh-wk-fet-disable + - cirrus,classh-wk-fet-delay + - cirrus,classh-wk-fet-thld + + Section 7.34 Class H VP Control + - cirrus,classh-vpch-auto + - cirrus,classh-vpch-rate + - cirrus,classh-vpch-man + +Optional Monitor Signal Format sub-node: + + The cs35l35 node can have a single "cirrus,monitor-signal-format" sub-node + for adjusting the Depth, Location and Frame of the Monitoring Signals + for Algorithms. + + See Sections 4.8.2 through 4.8.4 Serial-Port Control in the Datasheet + + -cirrus,monitor-signal-format : Sub-node for the Monitor Signaling Formating + on the I2S Port. Each of the 3 8 bit values in the array contain the settings + for depth, location, and frame. + + If not used, the defaults for the 6 monitor signals is used. + + Sections 7.44 - 7.53 lists values for the depth, location, and frame + for each monitoring signal. + + - cirrus,imon : 3 8 bit values to set the depth, location, and frame + of the IMON monitor signal. + + - cirrus,vmon : 3 8 bit values to set the depth, location, and frame + of the VMON monitor signal. + + - cirrus,vpmon : 3 8 bit values to set the depth, location, and frame + of the VPMON monitor signal. + + - cirrus,vbstmon : 3 8 bit values to set the depth, location, and frame + of the VBSTMON monitor signal + + - cirrus,vpbrstat : 3 8 bit values to set the depth, location, and frame + of the VPBRSTAT monitor signal + + - cirrus,zerofill : 3 8 bit values to set the depth, location, and frame\ + of the ZEROFILL packet in the monitor signal + +Example: + +cs35l35: cs35l35@20 { + compatible = "cirrus,cs35l35"; + reg = <0x20>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + reset-gpios = <&axi_gpio 54 0>; + interrupt-parent = <&gpio8>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + cirrus,boost-ctl = <0x41>; + + cirrus,stereo-config; + cirrus,audio-channel = <0x00>; + cirrus,advisory-channel = <0x01>; + cirrus,shared-boost; + + cirrus,classh-internal-algo { + cirrus,classh-bst-overide; + cirrus,classh-bst-max-limit = <0x01>; + cirrus,classh-mem-depth = <0x01>; + cirrus,classh-release-rate = <0x08>; + cirrus,classh-headroom-millivolt = <0x0B>; + cirrus,classh-wk-fet-disable = <0x01>; + cirrus,classh-wk-fet-delay = <0x04>; + cirrus,classh-wk-fet-thld = <0x01>; + cirrus,classh-vpch-auto = <0x01>; + cirrus,classh-vpch-rate = <0x02>; + cirrus,classh-vpch-man = <0x05>; + }; + + /* Depth, Location, Frame */ + cirrus,monitor-signal-format { + cirrus,imon = /bits/ 8 <0x03 0x00 0x01>; + cirrus,vmon = /bits/ 8 <0x03 0x00 0x00>; + cirrus,vpmon = /bits/ 8 <0x03 0x04 0x00>; + cirrus,vbstmon = /bits/ 8 <0x03 0x04 0x01>; + cirrus,vpbrstat = /bits/ 8 <0x00 0x04 0x00>; + cirrus,zerofill = /bits/ 8 <0x00 0x00 0x00>; + }; + +};