diff mbox

ath10k: fix AP/IBSS CSA with template based fw

Message ID 1423749198-11346-1-git-send-email-michal.kazior@tieto.com (mailing list archive)
State Superseded
Headers show

Commit Message

Michal Kazior Feb. 12, 2015, 1:53 p.m. UTC
qca6174 with wmi-tlv firmware uses offloaded
beaconing scheme (i.e. templates). This requires a
little different approach when implementing CSA.

Add missing code to update CS count and report CSA
completion to mac80211. Without it channel switch
was never finished.

To avoid races during interface teardown data_lock
has been used to protect is_up and is_started so
they can be compared against before scheduling
count down work.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---

@Kalle: I'm deferring the chanctx patchset v4
until this gets applied. I'd like to avoid posting
patches without a valid parent id and leaving you
with some weird conflicts and implicit depndencies
in the code to deal with.


 drivers/net/wireless/ath/ath10k/core.h    |  1 +
 drivers/net/wireless/ath/ath10k/mac.c     | 70 ++++++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |  8 ++++
 3 files changed, 77 insertions(+), 2 deletions(-)

Comments

Kalle Valo Feb. 15, 2015, 3:51 p.m. UTC | #1
Michal Kazior <michal.kazior@tieto.com> writes:

> qca6174 with wmi-tlv firmware uses offloaded
> beaconing scheme (i.e. templates). This requires a
> little different approach when implementing CSA.
>
> Add missing code to update CS count and report CSA
> completion to mac80211. Without it channel switch
> was never finished.
>
> To avoid races during interface teardown data_lock
> has been used to protect is_up and is_started so
> they can be compared against before scheduling
> count down work.
>
> Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
> ---
>
> @Kalle: I'm deferring the chanctx patchset v4
> until this gets applied. I'd like to avoid posting
> patches without a valid parent id and leaving you
> with some weird conflicts and implicit depndencies
> in the code to deal with.

Ok.

I actually had strange conflicts already with this patch (in mac.c). As
I'm travelling, please check my resolution from the pending branch very
carefully. I might have done something stupid.
Michal Kazior Feb. 16, 2015, 6:54 a.m. UTC | #2
On 15 February 2015 at 16:51, Kalle Valo <kvalo@qca.qualcomm.com> wrote:
> Michal Kazior <michal.kazior@tieto.com> writes:
>
>> qca6174 with wmi-tlv firmware uses offloaded
>> beaconing scheme (i.e. templates). This requires a
>> little different approach when implementing CSA.
>>
>> Add missing code to update CS count and report CSA
>> completion to mac80211. Without it channel switch
>> was never finished.
>>
>> To avoid races during interface teardown data_lock
>> has been used to protect is_up and is_started so
>> they can be compared against before scheduling
>> count down work.
>>
>> Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
>> ---
>>
>> @Kalle: I'm deferring the chanctx patchset v4
>> until this gets applied. I'd like to avoid posting
>> patches without a valid parent id and leaving you
>> with some weird conflicts and implicit depndencies
>> in the code to deal with.
>
> Ok.
>
> I actually had strange conflicts already with this patch (in mac.c). As
> I'm travelling, please check my resolution from the pending branch very
> carefully. I might have done something stupid.

There's a mistake. Only `arvif->is_up` should be protected by
`ar->data_lock` in ath10k_bss_assoc():

@@ -1852,7 +1901,9 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
                return;
        }

+       spin_lock_bh(&arvif->ar->data_lock);
        arvif->is_up = true;
+       spin_unlock_bh(&arvif->ar->data_lock);

        /* Workaround: Some firmware revisions (tested with qca6174
   (...)
 }


Micha?
Kalle Valo Feb. 16, 2015, 1:21 p.m. UTC | #3
Michal Kazior <michal.kazior@tieto.com> writes:

>> I actually had strange conflicts already with this patch (in mac.c). As
>> I'm travelling, please check my resolution from the pending branch very
>> carefully. I might have done something stupid.
>
> There's a mistake. Only `arvif->is_up` should be protected by
> `ar->data_lock` in ath10k_bss_assoc():
>
> @@ -1852,7 +1901,9 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
>                 return;
>         }
>
> +       spin_lock_bh(&arvif->ar->data_lock);
>         arvif->is_up = true;
> +       spin_unlock_bh(&arvif->ar->data_lock);
>
>         /* Workaround: Some firmware revisions (tested with qca6174

Thanks for catching this. I fixed it now, can you please check again?
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index d60e46f..43fa2ec 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -320,6 +320,7 @@  struct ath10k_vif {
 	int num_legacy_stations;
 	int txpower;
 	struct wmi_wmm_params_all_arg wmm_params;
+	struct work_struct ap_csa_work;
 };
 
 struct ath10k_vif_iter {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index d6d2f0f..631e73b 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1055,6 +1055,10 @@  static int ath10k_mac_setup_bcn_tmpl(struct ath10k_vif *arvif)
 	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
 		return 0;
 
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+	    arvif->vdev_type != WMI_VDEV_TYPE_IBSS)
+		return 0;
+
 	bcn = ieee80211_beacon_get_template(hw, vif, &offs);
 	if (!bcn) {
 		ath10k_warn(ar, "failed to get beacon template from mac80211\n");
@@ -1100,6 +1104,9 @@  static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
 	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
 		return 0;
 
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
+		return 0;
+
 	prb = ieee80211_proberesp_get(hw, vif);
 	if (!prb) {
 		ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
@@ -1129,10 +1136,9 @@  static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 	if (!info->enable_beacon) {
 		ath10k_vdev_stop(arvif);
 
+		spin_lock_bh(&arvif->ar->data_lock);
 		arvif->is_started = false;
 		arvif->is_up = false;
-
-		spin_lock_bh(&arvif->ar->data_lock);
 		ath10k_mac_vif_beacon_free(arvif);
 		spin_unlock_bh(&arvif->ar->data_lock);
 
@@ -1335,6 +1341,49 @@  static int ath10k_mac_vif_disable_keepalive(struct ath10k_vif *arvif)
 	return 0;
 }
 
+static void ath10k_mac_vif_ap_csa_count_down(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_vif *vif = arvif->vif;
+	int ret;
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
+		return;
+
+	if (!vif->csa_active)
+		return;
+
+	if (!arvif->is_up)
+		return;
+
+	if (!ieee80211_csa_is_complete(vif)) {
+		ieee80211_csa_update_counter(vif);
+
+		ret = ath10k_mac_setup_bcn_tmpl(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
+				    ret);
+
+		ret = ath10k_mac_setup_prb_tmpl(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
+				    ret);
+	} else {
+		ieee80211_csa_finish(vif);
+	}
+}
+
+static void ath10k_mac_vif_ap_csa_work(struct work_struct *work)
+{
+	struct ath10k_vif *arvif = container_of(work, struct ath10k_vif,
+						ap_csa_work);
+	struct ath10k *ar = arvif->ar;
+
+	mutex_lock(&ar->conf_mutex);
+	ath10k_mac_vif_ap_csa_count_down(arvif);
+	mutex_unlock(&ar->conf_mutex);
+}
+
 /**********************/
 /* Station management */
 /**********************/
@@ -1852,7 +1901,9 @@  static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 		return;
 	}
 
+	spin_lock_bh(&arvif->ar->data_lock);
 	arvif->is_up = true;
+	spin_unlock_bh(&arvif->ar->data_lock);
 }
 
 static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
@@ -1874,7 +1925,9 @@  static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
 
 	arvif->def_wep_key_idx = -1;
 
+	spin_lock_bh(&arvif->ar->data_lock);
 	arvif->is_up = false;
+	spin_unlock_bh(&arvif->ar->data_lock);
 }
 
 static int ath10k_station_assoc(struct ath10k *ar,
@@ -2931,6 +2984,16 @@  static void ath10k_config_chan(struct ath10k *ar)
 		if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
 			continue;
 
+		ret = ath10k_mac_setup_bcn_tmpl(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
+				    ret);
+
+		ret = ath10k_mac_setup_prb_tmpl(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
+				    ret);
+
 		ret = ath10k_vdev_restart(arvif);
 		if (ret) {
 			ath10k_warn(ar, "failed to restart vdev %d: %d\n",
@@ -3091,6 +3154,7 @@  static int ath10k_add_interface(struct ieee80211_hw *hw,
 	arvif->vif = vif;
 
 	INIT_LIST_HEAD(&arvif->list);
+	INIT_WORK(&arvif->ap_csa_work, ath10k_mac_vif_ap_csa_work);
 
 	if (ar->free_vdev_map == 0) {
 		ath10k_warn(ar, "Free vdev map is empty, no more interfaces allowed.\n");
@@ -3308,6 +3372,8 @@  static void ath10k_remove_interface(struct ieee80211_hw *hw,
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	int ret;
 
+	cancel_work_sync(&arvif->ap_csa_work);
+
 	mutex_lock(&ar->conf_mutex);
 
 	spin_lock_bh(&ar->data_lock);
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 71614ba..538a643 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -17,6 +17,7 @@ 
 #include "core.h"
 #include "debug.h"
 #include "hw.h"
+#include "mac.h"
 #include "wmi.h"
 #include "wmi-ops.h"
 #include "wmi-tlv.h"
@@ -168,6 +169,7 @@  static int ath10k_wmi_tlv_event_bcn_tx_status(struct ath10k *ar,
 {
 	const void **tb;
 	const struct wmi_tlv_bcn_tx_status_ev *ev;
+	struct ath10k_vif *arvif;
 	u32 vdev_id, tx_status;
 	int ret;
 
@@ -201,6 +203,12 @@  static int ath10k_wmi_tlv_event_bcn_tx_status(struct ath10k *ar,
 		break;
 	}
 
+	spin_lock_bh(&ar->data_lock);
+	arvif = ath10k_get_arvif(ar, vdev_id);
+	if (arvif && arvif->is_up)
+		ieee80211_queue_work(ar->hw, &arvif->ap_csa_work);
+	spin_unlock_bh(&ar->data_lock);
+
 	kfree(tb);
 	return 0;
 }