@@ -3949,83 +3949,6 @@ static int ath10k_config_ps(struct ath10k *ar)
return ret;
}
-static void ath10k_mac_chan_reconfigure(struct ath10k *ar)
-{
- struct ath10k_vif *arvif;
- struct cfg80211_chan_def def;
- int ret;
-
- lockdep_assert_held(&ar->conf_mutex);
-
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac chan reconfigure\n");
-
- /* First stop monitor interface. Some FW versions crash if there's a
- * lone monitor interface. */
- if (ar->monitor_started)
- ath10k_monitor_stop(ar);
-
- list_for_each_entry(arvif, &ar->arvifs, list) {
- if (!arvif->is_started)
- continue;
-
- if (!arvif->is_up)
- continue;
-
- if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
- continue;
-
- ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
- if (ret) {
- ath10k_warn(ar, "failed to down vdev %d: %d\n",
- arvif->vdev_id, ret);
- continue;
- }
- }
-
- /* all vdevs are downed now - attempt to restart and re-up them */
-
- list_for_each_entry(arvif, &ar->arvifs, list) {
- if (!arvif->is_started)
- continue;
-
- if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
- continue;
-
- ret = ath10k_mac_setup_bcn_tmpl(arvif);
- if (ret)
- ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
- ret);
-
- ret = ath10k_mac_setup_prb_tmpl(arvif);
- if (ret)
- ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
- ret);
-
- if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def)))
- continue;
-
- ret = ath10k_vdev_restart(arvif, &def);
- if (ret) {
- ath10k_warn(ar, "failed to restart vdev %d: %d\n",
- arvif->vdev_id, ret);
- continue;
- }
-
- if (!arvif->is_up)
- continue;
-
- ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
- arvif->bssid);
- if (ret) {
- ath10k_warn(ar, "failed to bring vdev up %d: %d\n",
- arvif->vdev_id, ret);
- continue;
- }
- }
-
- ath10k_monitor_recalc(ar);
-}
-
static int ath10k_mac_txpower_setup(struct ath10k *ar, int txpower)
{
int ret;
@@ -6365,6 +6288,7 @@ ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
{
struct ath10k *ar = hw->priv;
struct ath10k_vif *arvif;
+ int ret;
int i;
mutex_lock(&ar->conf_mutex);
@@ -6373,7 +6297,12 @@ ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
"mac chanctx switch n_vifs %d mode %d\n",
n_vifs, mode);
- spin_lock_bh(&ar->data_lock);
+ /* First stop monitor interface. Some FW versions crash if there's a
+ * lone monitor interface.
+ */
+ if (ar->monitor_started)
+ ath10k_monitor_stop(ar);
+
for (i = 0; i < n_vifs; i++) {
arvif = ath10k_vif_to_arvif(vifs[i].vif);
@@ -6384,12 +6313,65 @@ ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
vifs[i].new_ctx->def.chan->center_freq,
vifs[i].old_ctx->def.width,
vifs[i].new_ctx->def.width);
+
+ if (WARN_ON(!arvif->is_started))
+ continue;
+
+ if (WARN_ON(!arvif->is_up))
+ continue;
+
+ ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+ if (ret) {
+ ath10k_warn(ar, "failed to down vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ continue;
+ }
}
+
+ /* All relevant vdevs are downed and associated channel resources
+ * should be available for the channel switch now.
+ */
+
+ spin_lock_bh(&ar->data_lock);
ath10k_mac_update_rx_channel(ar, NULL, vifs, n_vifs);
spin_unlock_bh(&ar->data_lock);
- /* FIXME: Reconfigure only affected vifs */
- ath10k_mac_chan_reconfigure(ar);
+ for (i = 0; i < n_vifs; i++) {
+ arvif = ath10k_vif_to_arvif(vifs[i].vif);
+
+ if (WARN_ON(!arvif->is_started))
+ continue;
+
+ if (WARN_ON(!arvif->is_up))
+ continue;
+
+ ret = ath10k_mac_setup_bcn_tmpl(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
+ ret);
+
+ ret = ath10k_mac_setup_prb_tmpl(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
+ ret);
+
+ ret = ath10k_vdev_restart(arvif, &vifs[i].new_ctx->def);
+ if (ret) {
+ ath10k_warn(ar, "failed to restart vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ continue;
+ }
+
+ ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
+ arvif->bssid);
+ if (ret) {
+ ath10k_warn(ar, "failed to bring vdev up %d: %d\n",
+ arvif->vdev_id, ret);
+ continue;
+ }
+ }
+
+ ath10k_monitor_recalc(ar);
mutex_unlock(&ar->conf_mutex);
return 0;
In the midst of chanctx patch review channel switching became broken which I failed to notice until now. Function ath10k_mac_vif_chan() reports current chandef which isn't updated until after switch_vif_chanctx() is returned from. Consequently the driver just restarted operation on channels it was residing already instead of switching to the new ones. Fixes: 500ff9f9389d ("ath10k: implement chanctx API") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> --- drivers/net/wireless/ath/ath10k/mac.c | 142 +++++++++++++++------------------- 1 file changed, 62 insertions(+), 80 deletions(-)