From patchwork Tue Feb 21 16:15:26 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Erik Stromdahl X-Patchwork-Id: 9585081 X-Patchwork-Delegate: kvalo@adurom.com Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 737856042F for ; Tue, 21 Feb 2017 16:18:48 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 5AC0F28527 for ; Tue, 21 Feb 2017 16:18:48 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 4DD6C285C6; Tue, 21 Feb 2017 16:18:48 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.9 required=2.0 tests=BAYES_00, DKIM_ADSP_CUSTOM_MED, DKIM_SIGNED, DKIM_VALID, FREEMAIL_FROM autolearn=unavailable version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [65.50.211.133]) (using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 73D8928527 for ; Tue, 21 Feb 2017 16:18:45 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:References: In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=oZSit1wiYMQmpczlrgvhYJ3YHyI+uqxY5HualedlAmw=; b=COkxNi0j+IHuUhPgiDIG+3qAhm qocKDYVgYGZ9ALgQGiLN+vCkYRa5z8kvp6dRKeqwdP4HEee2MbJMfooWaYDB1k68nvW0aqlvYuivM SmDNur1qOOioC864BWxuM5qlg0sPGYguS5SqMQZZawlsT3vBuq5HR/z8yYO45nPgpy9OnIgbagjrP YqUvgBWCoAkZg6ql+0lE2NlBc4fAF2xpCZdVu/0uw29miRxy44R5qtYn9/kKQlrDNLxj+sAE2umYn YnsMkjbbwTO1CUjOzXRMuFuGCTHWctPVkNwt1vGLyUUkeI8H9v6sy2HJizVBHVPrAhP+NRdnPDLxZ ywSu1oKw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.87 #1 (Red Hat Linux)) id 1cgD9D-0000is-22; Tue, 21 Feb 2017 16:18:39 +0000 Received: from mail-lf0-x241.google.com ([2a00:1450:4010:c07::241]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1cgD7J-0006hC-EB for ath10k@lists.infradead.org; Tue, 21 Feb 2017 16:17:29 +0000 Received: by mail-lf0-x241.google.com with SMTP id h67so3752083lfg.1 for ; Tue, 21 Feb 2017 08:16:21 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=YSJpll/Y5Eh2NJrXEn8u7AoIMMEhssNtEweBGmLTx5E=; b=W6vXQ1KbJnmbdL2mUleWlLJjnx+2J35B/yOMQxP9I6v09xYyb4HHMOCtn/AiqAuQn2 IlaohO4EsdA7iHpbhNhlMgiEvv54FhD9rsydREXa1LLBiLLh7C5MefrUc7/FlU43A69a Spf49zphltPN18RuzObJCLg1q/nc5E4krOqFa1pJ7NI+Zgf9AaN60FB0O5Dyx63m3XyS XXzQFmw1ZDaQXRd9c6f+dTk3WuDTJbeRMqv6vV0JL6UIwdD0GUbenpv0/1AFJschwsUc H8DrvG2F/ocJxhlm6ZUghvU103sOew6Dp0pzxQOCWuGd2NyWsJ3C1SU4VDvuJTMvd8ac 1XEw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=YSJpll/Y5Eh2NJrXEn8u7AoIMMEhssNtEweBGmLTx5E=; b=O+ROdA0iaeU66Pnei35lz3uWulz/sKUlgA5+BidZhARNSNMmaOCFN+Ecgmp+UZbhdt q+uzCrxVWJ7hDINyc7SypPIu/KasCpkIjY+HAUWAlup3uMbGyUjxDanVlB8tt59VpwuQ I+Nh98p/g8DLWHGNxuehL6I5lCL8CmNc8BiZv/5GUmxgz1enL71i/fhvLeUmTCFJxIvj yye4OXnIGk7hwW7aEHRU1yKJpFtSHOfVJ6A+NBX8sFMFWYuIWfueoJW3LH5xyLG1KcSc FN+i8cKacsawmxuCaXbU8zHoUj7c1PBPkxqNcwMvxjlen+6BMK7b3PpcgJe54HDypgW2 3fjA== X-Gm-Message-State: AMke39nt+tfJZHH3I+3uFnrnBJ+2U60aFlX6NMPL/lTn0TFd59d+SH1B9VrhOxh907n37g== X-Received: by 10.46.84.84 with SMTP id y20mr7388720ljd.122.1487693778248; Tue, 21 Feb 2017 08:16:18 -0800 (PST) Received: from erik-mate-1604.lan (90-227-62-61-no75.tbcn.telia.com. [90.227.62.61]) by smtp.gmail.com with ESMTPSA id t29sm6336069ljd.39.2017.02.21.08.16.17 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Tue, 21 Feb 2017 08:16:17 -0800 (PST) From: Erik Stromdahl To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org, ath10k@lists.infradead.org Subject: [RFC v4 06/21] ath10k: sdio support Date: Tue, 21 Feb 2017 17:15:26 +0100 Message-Id: <1487693741-10042-7-git-send-email-erik.stromdahl@gmail.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1487693741-10042-1-git-send-email-erik.stromdahl@gmail.com> References: <1487693741-10042-1-git-send-email-erik.stromdahl@gmail.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20170221_081643_361865_2F919963 X-CRM114-Status: GOOD ( 20.45 ) X-BeenThere: ath10k@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Erik Stromdahl MIME-Version: 1.0 Sender: "ath10k" Errors-To: ath10k-bounces+patchwork-ath10k=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP sdio/mailbox HIF implementation. Signed-off-by: Erik Stromdahl --- drivers/net/wireless/ath/ath10k/Kconfig | 6 + drivers/net/wireless/ath/ath10k/Makefile | 3 + drivers/net/wireless/ath/ath10k/sdio.c | 2138 ++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/sdio.h | 263 ++++ 4 files changed, 2410 insertions(+) create mode 100644 drivers/net/wireless/ath/ath10k/sdio.c create mode 100644 drivers/net/wireless/ath/ath10k/sdio.h diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig index b4241cf..f2f6321 100644 --- a/drivers/net/wireless/ath/ath10k/Kconfig +++ b/drivers/net/wireless/ath/ath10k/Kconfig @@ -22,6 +22,12 @@ config ATH10K_AHB ---help--- This module adds support for AHB bus +config ATH10K_SDIO + tristate "Atheros ath10k SDIO support (EXPERIMENTAL)" + depends on ATH10K && MMC + ---help--- + This module adds support for SDIO/MMC bus + config ATH10K_DEBUG bool "Atheros ath10k debugging" depends on ATH10K diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile index 930fadd..b0b19a7 100644 --- a/drivers/net/wireless/ath/ath10k/Makefile +++ b/drivers/net/wireless/ath/ath10k/Makefile @@ -27,5 +27,8 @@ ath10k_pci-y += pci.o \ ath10k_pci-$(CONFIG_ATH10K_AHB) += ahb.o +obj-$(CONFIG_ATH10K_SDIO) += ath10k_sdio.o +ath10k_sdio-y += sdio.o + # for tracing framework to find trace.h CFLAGS_trace.o := -I$(src) diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c new file mode 100644 index 0000000..06379da --- /dev/null +++ b/drivers/net/wireless/ath/ath10k/sdio.c @@ -0,0 +1,2138 @@ +/* + * Copyright (c) 2004-2011 Atheros Communications Inc. + * Copyright (c) 2011-2012 Qualcomm Atheros, Inc. + * Copyright (c) 2016-2017 Erik Stromdahl + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "core.h" +#include "bmi.h" +#include "debug.h" +#include "hif.h" +#include "htc.h" +#include "targaddrs.h" +#include "trace.h" +#include "sdio.h" + +/* inlined helper functions */ + +static inline int ath10k_sdio_calc_txrx_padded_len(struct ath10k_sdio *ar_sdio, + size_t len) +{ + return __ALIGN_MASK((len), ar_sdio->mbox_info.block_mask); +} + +static inline enum ath10k_htc_ep_id pipe_id_to_eid(u8 pipe_id) +{ + return (enum ath10k_htc_ep_id)pipe_id; +} + +static inline void ath10k_sdio_mbox_free_rx_pkt(struct ath10k_sdio_rx_data *pkt) +{ + dev_kfree_skb(pkt->skb); + pkt->skb = NULL; + pkt->alloc_len = 0; + pkt->act_len = 0; + pkt->trailer_only = false; +} + +static inline int ath10k_sdio_mbox_alloc_rx_pkt(struct ath10k_sdio_rx_data *pkt, + size_t act_len, size_t full_len, + bool part_of_bundle, + bool last_in_bundle) +{ + pkt->skb = dev_alloc_skb(full_len); + if (!pkt->skb) + return -ENOMEM; + + pkt->act_len = act_len; + pkt->alloc_len = full_len; + pkt->part_of_bundle = part_of_bundle; + pkt->last_in_bundle = last_in_bundle; + pkt->trailer_only = false; + + return 0; +} + +static inline bool is_trailer_only_msg(struct ath10k_sdio_rx_data *pkt) +{ + bool trailer_only = false; + struct ath10k_htc_hdr *htc_hdr = + (struct ath10k_htc_hdr *)pkt->skb->data; + u16 len = __le16_to_cpu(htc_hdr->len); + + if (len == htc_hdr->trailer_len) + trailer_only = true; + + return trailer_only; +} + +/* sdio/mmc functions */ + +static inline void ath10k_sdio_set_cmd52_arg(u32 *arg, u8 write, u8 raw, + unsigned int address, + unsigned char val) +{ + *arg = FIELD_PREP(BIT(31), write) | + FIELD_PREP(BIT(27), raw) | + FIELD_PREP(BIT(26), 1) | + FIELD_PREP(GENMASK(25, 9), address) | + FIELD_PREP(BIT(8), 1) | + FIELD_PREP(GENMASK(7, 0), val); +} + +static int ath10k_sdio_func0_cmd52_wr_byte(struct mmc_card *card, + unsigned int address, + unsigned char byte) +{ + struct mmc_command io_cmd; + + memset(&io_cmd, 0, sizeof(io_cmd)); + ath10k_sdio_set_cmd52_arg(&io_cmd.arg, 1, 0, address, byte); + io_cmd.opcode = SD_IO_RW_DIRECT; + io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; + + return mmc_wait_for_cmd(card->host, &io_cmd, 0); +} + +static int ath10k_sdio_func0_cmd52_rd_byte(struct mmc_card *card, + unsigned int address, + unsigned char *byte) +{ + int ret; + struct mmc_command io_cmd; + + memset(&io_cmd, 0, sizeof(io_cmd)); + ath10k_sdio_set_cmd52_arg(&io_cmd.arg, 0, 0, address, 0); + io_cmd.opcode = SD_IO_RW_DIRECT; + io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC; + + ret = mmc_wait_for_cmd(card->host, &io_cmd, 0); + if (!ret) + *byte = io_cmd.resp[0]; + + return ret; +} + +static int ath10k_sdio_config(struct ath10k *ar) +{ + int ret; + unsigned char byte, asyncintdelay = 2; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct sdio_func *func = ar_sdio->func; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "SDIO configuration\n"); + + sdio_claim_host(func); + + byte = 0; + ret = ath10k_sdio_func0_cmd52_rd_byte(func->card, + SDIO_CCCR_DRIVE_STRENGTH, + &byte); + + byte &= ~ATH10K_SDIO_DRIVE_DTSX_MASK; + byte |= FIELD_PREP(ATH10K_SDIO_DRIVE_DTSX_MASK, + ATH10K_SDIO_DRIVE_DTSX_TYPE_D); + + ret = ath10k_sdio_func0_cmd52_wr_byte(func->card, + SDIO_CCCR_DRIVE_STRENGTH, + byte); + + byte = 0; + ret = ath10k_sdio_func0_cmd52_rd_byte( + func->card, + CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR, + &byte); + + byte |= (CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A | + CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C | + CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D); + + ret = ath10k_sdio_func0_cmd52_wr_byte( + func->card, + CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR, + byte); + if (ret) { + ath10k_warn(ar, "Failed to enable driver strengt\n"); + goto err; + } + + byte = 0; + ret = ath10k_sdio_func0_cmd52_rd_byte(func->card, + CCCR_SDIO_IRQ_MODE_REG_SDIO3, + &byte); + + byte |= SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3; + + ret = ath10k_sdio_func0_cmd52_wr_byte(func->card, + CCCR_SDIO_IRQ_MODE_REG_SDIO3, + byte); + if (ret) { + ath10k_warn(ar, "Failed to enable 4-bit async irq mode %d\n", + ret); + goto err; + } + + byte = 0; + ret = ath10k_sdio_func0_cmd52_rd_byte(func->card, + CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS, + &byte); + + byte &= ~CCCR_SDIO_ASYNC_INT_DELAY_MASK; + byte |= FIELD_PREP(CCCR_SDIO_ASYNC_INT_DELAY_MASK, asyncintdelay); + + ret = ath10k_sdio_func0_cmd52_wr_byte(func->card, + CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS, + byte); + + /* give us some time to enable, in ms */ + func->enable_timeout = 100; + + ret = sdio_set_block_size(func, ar_sdio->mbox_info.block_size); + if (ret) { + ath10k_warn(ar, "Set sdio block size %d failed: %d)\n", + ar_sdio->mbox_info.block_size, ret); + goto err; + } + + sdio_release_host(func); + return 0; +err: + sdio_release_host(func); + return ret; +} + +static int ath10k_sdio_io(struct ath10k *ar, u32 request, u32 addr, + u8 *buf, u32 len) +{ + int ret; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct sdio_func *func = ar_sdio->func; + + sdio_claim_host(func); + + if (request & HIF_WRITE) { + if (request & HIF_FIXED_ADDRESS) + ret = sdio_writesb(func, addr, buf, len); + else + ret = sdio_memcpy_toio(func, addr, buf, len); + } else { + if (request & HIF_FIXED_ADDRESS) + ret = sdio_readsb(func, buf, addr, len); + else + ret = sdio_memcpy_fromio(func, buf, addr, len); + } + + sdio_release_host(func); + + ath10k_dbg(ar, ATH10K_DBG_SDIO, "%s addr 0x%x%s buf 0x%p len %d\n", + request & HIF_WRITE ? "wr" : "rd", addr, + request & HIF_FIXED_ADDRESS ? " (fixed)" : "", buf, len); + ath10k_dbg_dump(ar, ATH10K_DBG_SDIO_DUMP, NULL, + request & HIF_WRITE ? "sdio wr " : "sdio rd ", + buf, len); + + return ret; +} + +static int ath10k_sdio_read_write_sync(struct ath10k *ar, u32 addr, u8 *buf, + u32 len, u32 request) +{ + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + + if (request & HIF_BLOCK_BASIS) + len = round_down(len, ar_sdio->mbox_info.block_size); + + return ath10k_sdio_io(ar, request, addr, buf, len); +} + +/* HIF mbox functions */ + +static int ath10k_sdio_mbox_rx_process_packet(struct ath10k *ar, + struct ath10k_sdio_rx_data *pkt, + u32 *lookaheads, + int *n_lookaheads) +{ + int ret; + struct ath10k_htc *htc = &ar->htc; + struct sk_buff *skb = pkt->skb; + struct ath10k_htc_hdr *htc_hdr = (struct ath10k_htc_hdr *)skb->data; + bool trailer_present = htc_hdr->flags & ATH10K_HTC_FLAG_TRAILER_PRESENT; + u16 payload_len; + + payload_len = le16_to_cpu(htc_hdr->len); + + if (trailer_present) { + u8 *trailer; + enum ath10k_htc_ep_id eid; + + trailer = skb->data + sizeof(*htc_hdr) + + payload_len - htc_hdr->trailer_len; + + eid = pipe_id_to_eid(htc_hdr->eid); + + ret = ath10k_htc_process_trailer(htc, + trailer, + htc_hdr->trailer_len, + eid, + lookaheads, + n_lookaheads); + if (ret) + goto err; + + if (is_trailer_only_msg(pkt)) + pkt->trailer_only = true; + + skb_trim(skb, skb->len - htc_hdr->trailer_len); + } + + skb_pull(skb, sizeof(*htc_hdr)); + + return 0; +err: + return ret; +} + +static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar, + u32 lookaheads[], + int *n_lookahead) +{ + int ret, i; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_htc *htc = &ar->htc; + struct ath10k_sdio_rx_data *pkt; + + for (i = 0; i < ar_sdio->n_rx_pkts; i++) { + struct ath10k_htc_ep *ep; + enum ath10k_htc_ep_id id; + u32 *lookaheads_local = lookaheads; + int *n_lookahead_local = n_lookahead; + + id = ((struct ath10k_htc_hdr *)&lookaheads[i])->eid; + + if (id >= ATH10K_HTC_EP_COUNT) { + ath10k_warn(ar, "Invalid endpoint in look-ahead: %d\n", + id); + ret = -ENOMEM; + goto out; + } + + ep = &htc->endpoint[id]; + + if (ep->service_id == 0) { + ath10k_warn(ar, "ep %d is not connected !\n", id); + ret = -ENOMEM; + goto out; + } + + pkt = &ar_sdio->rx_pkts[i]; + + if (pkt->part_of_bundle && !pkt->last_in_bundle) { + /* Only read lookahead's from RX trailers + * for the last packet in a bundle. + */ + lookaheads_local = NULL; + n_lookahead_local = NULL; + } + + ret = ath10k_sdio_mbox_rx_process_packet(ar, + pkt, + lookaheads_local, + n_lookahead_local); + if (ret) + goto out; + + if (!pkt->trailer_only) + ep->ep_ops.ep_rx_complete(ar_sdio->ar, pkt->skb); + else + kfree_skb(pkt->skb); + + /* The RX complete handler now owns the skb...*/ + pkt->skb = NULL; + pkt->alloc_len = 0; + } + + ret = 0; +out: + /* Free all packets that was not passed on to the RX completion + * handler... + */ + for (; i < ar_sdio->n_rx_pkts; i++) + ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]); + + return ret; +} + +static int ath10k_sdio_mbox_alloc_pkt_bundle(struct ath10k *ar, + struct ath10k_sdio_rx_data *rx_pkts, + struct ath10k_htc_hdr *htc_hdr, + size_t full_len, size_t act_len, + size_t *bndl_cnt) +{ + int ret, i; + + *bndl_cnt = FIELD_GET(ATH10K_HTC_FLAG_BUNDLE_MASK, htc_hdr->flags); + + if (*bndl_cnt > HTC_HOST_MAX_MSG_PER_BUNDLE) { + ath10k_warn(ar, + "HTC bundle len %u exceeds maximum %u !\n", + le16_to_cpu(htc_hdr->len), + HTC_HOST_MAX_MSG_PER_BUNDLE); + ret = -ENOMEM; + goto err; + } + + /* Allocate bndl_cnt extra skb's for the bundle. + * The package containing the + * ATH10K_HTC_FLAG_BUNDLE_MASK flag is not included + * in bndl_cnt. The skb for that packet will be + * allocated separately. + */ + for (i = 0; i < *bndl_cnt; i++) { + ret = ath10k_sdio_mbox_alloc_rx_pkt(&rx_pkts[i], + act_len, + full_len, + true, + false); + if (ret) + goto err; + } + + return 0; +err: + return ret; +} + +static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar, + u32 lookaheads[], int n_lookaheads) +{ + int ret, i; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + + if (n_lookaheads > ATH10K_SDIO_MAX_RX_MSGS) { + ath10k_warn(ar, + "The total number of pkgs to be fetched (%u) exceeds maximum %u !\n", + n_lookaheads, + ATH10K_SDIO_MAX_RX_MSGS); + ret = -ENOMEM; + goto err; + } + + for (i = 0; i < n_lookaheads; i++) { + struct ath10k_htc_hdr *htc_hdr = + (struct ath10k_htc_hdr *)&lookaheads[i]; + size_t full_len, act_len; + bool last_in_bundle = false; + + if (le16_to_cpu(htc_hdr->len) > + ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH) { + ath10k_warn(ar, + "payload len %d exceeds max htc : %zu!\n", + le16_to_cpu(htc_hdr->len), + ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH); + ret = -ENOMEM; + goto err; + } + + act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr); + full_len = ath10k_sdio_calc_txrx_padded_len(ar_sdio, act_len); + + if (full_len > ATH10K_SDIO_MAX_BUFFER_SIZE) { + ath10k_warn(ar, + "Rx buffer requested with invalid length htc_hdr:eid %d, flags 0x%x, len %d\n", + htc_hdr->eid, htc_hdr->flags, + le16_to_cpu(htc_hdr->len)); + ret = -EINVAL; + goto err; + } + + if (htc_hdr->flags & ATH10K_HTC_FLAG_BUNDLE_MASK) { + /* HTC header indicates that every packet to follow + * has the same padded length so that it can be + * optimally fetched as a full bundle. + */ + size_t bndl_cnt; + + ret = ath10k_sdio_mbox_alloc_pkt_bundle(ar, + &ar_sdio->rx_pkts[i], + htc_hdr, + full_len, + act_len, + &bndl_cnt); + + n_lookaheads += bndl_cnt; + i += bndl_cnt; + /*Next buffer will be the last in the bundle */ + last_in_bundle = true; + } + + /* Allocate skb for packet. If the packet had the + * ATH10K_HTC_FLAG_BUNDLE_MASK flag set, all bundled + * packet skb's have been allocated in the previous step. + */ + ret = ath10k_sdio_mbox_alloc_rx_pkt(&ar_sdio->rx_pkts[i], + act_len, + full_len, + last_in_bundle, + last_in_bundle); + } + + ar_sdio->n_rx_pkts = i; + + return 0; +err: + + for (i = 0; i < ATH10K_SDIO_MAX_RX_MSGS; i++) { + if (!ar_sdio->rx_pkts[i].alloc_len) + break; + ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]); + } + + return ret; +} + +static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar, + struct ath10k_sdio_rx_data *pkt) +{ + int ret; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct sk_buff *skb = pkt->skb; + + ret = ath10k_sdio_read_write_sync(ar, + ar_sdio->mbox_info.htc_addr, + skb->data, pkt->alloc_len, + HIF_RD_SYNC_BLOCK_FIX); + + pkt->status = ret; + if (!ret) + skb_put(skb, pkt->act_len); + + return ret; +} + +static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar) +{ + int ret, i; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + + for (i = 0; i < ar_sdio->n_rx_pkts; i++) { + ret = ath10k_sdio_mbox_rx_packet(ar, + &ar_sdio->rx_pkts[i]); + if (ret) + goto err; + } + + return 0; +err: + /* Free all packets that was not successfully fetched. */ + for (; i < ar_sdio->n_rx_pkts; i++) + ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]); + + return ret; +} + +/* This is the timeout for mailbox processing done in the sdio irq + * handler. The timeout is deliberately set quite high since SDIO dump logs + * over serial port can/will add a substantial overhead to the processing + * (if enabled). + */ +#define SDIO_MBOX_PROCESSING_TIMEOUT_HZ (20 * HZ) + +static int ath10k_sdio_mbox_rxmsg_pending_handler(struct ath10k *ar, + u32 msg_lookahead, bool *done) +{ + int ret; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + u32 lookaheads[ATH10K_SDIO_MAX_RX_MSGS]; + int n_lookaheads = 1; + unsigned long timeout; + + *done = true; + + /* Copy the lookahead obtained from the HTC register table into our + * temp array as a start value. + */ + lookaheads[0] = msg_lookahead; + + timeout = jiffies + SDIO_MBOX_PROCESSING_TIMEOUT_HZ; + while (time_before(jiffies, timeout)) { + /* Try to allocate as many HTC RX packets indicated by + * n_lookaheads. + */ + ret = ath10k_sdio_mbox_rx_alloc(ar, lookaheads, + n_lookaheads); + if (ret) + break; + + if (ar_sdio->n_rx_pkts >= 2) + /* A recv bundle was detected, force IRQ status + * re-check again. + */ + *done = false; + + ret = ath10k_sdio_mbox_rx_fetch(ar); + + /* Process fetched packets. This will potentially update + * n_lookaheads depending on if the packets contain lookahead + * reports. + */ + n_lookaheads = 0; + ret = ath10k_sdio_mbox_rx_process_packets(ar, + lookaheads, + &n_lookaheads); + + if (!n_lookaheads || ret) + break; + + /* For SYNCH processing, if we get here, we are running + * through the loop again due to updated lookaheads. Set + * flag that we should re-check IRQ status registers again + * before leaving IRQ processing, this can net better + * performance in high throughput situations. + */ + *done = false; + } + + if (ret && (ret != -ECANCELED)) + ath10k_warn(ar, "failed to get pending recv messages: %d\n", + ret); + + return ret; +} + +static int ath10k_sdio_mbox_proc_dbg_intr(struct ath10k *ar) +{ + int ret; + u32 *dummy; + + dummy = kzalloc(sizeof(*dummy), GFP_KERNEL); + if (!dummy) { + ret = -ENOMEM; + goto err; + } + + /* TODO: Add firmware crash handling */ + ath10k_warn(ar, "firmware crashed\n"); + + /* read counter to clear the interrupt, the debug error interrupt is + * counter 0. + */ + ret = ath10k_sdio_read_write_sync(ar, MBOX_COUNT_DEC_ADDRESS, + (u8 *)dummy, sizeof(*dummy), + HIF_RD_SYNC_BYTE_INC); + if (ret) + ath10k_warn(ar, "Failed to clear debug interrupt: %d\n", ret); + + kfree(dummy); +err: + return ret; +} + +static int ath10k_sdio_mbox_proc_counter_intr(struct ath10k *ar) +{ + int ret; + u8 counter_int_status; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data; + + mutex_lock(&irq_data->mtx); + counter_int_status = irq_data->irq_proc_reg->counter_int_status & + irq_data->irq_en_reg->cntr_int_status_en; + + /* NOTE: other modules like GMBOX may use the counter interrupt for + * credit flow control on other counters, we only need to check for + * the debug assertion counter interrupt. + */ + if (counter_int_status & ATH10K_SDIO_TARGET_DEBUG_INTR_MASK) + ret = ath10k_sdio_mbox_proc_dbg_intr(ar); + else + ret = 0; + + mutex_unlock(&irq_data->mtx); + + return ret; +} + +static int ath10k_sdio_mbox_proc_err_intr(struct ath10k *ar) +{ + int ret; + u8 error_int_status; + u8 *reg_buf; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data; + + reg_buf = kzalloc(4, GFP_KERNEL); + if (!reg_buf) { + ret = -ENOMEM; + goto err; + } + + ath10k_dbg(ar, ATH10K_DBG_SDIO, "error interrupt\n"); + + error_int_status = irq_data->irq_proc_reg->error_int_status & 0x0F; + if (!error_int_status) { + ath10k_warn(ar, "error interrupt status: %x\n", + error_int_status); + ret = -EIO; + goto err_free; + } + + ath10k_dbg(ar, ATH10K_DBG_SDIO, + "valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n", + error_int_status); + + if (FIELD_GET(MBOX_ERROR_INT_STATUS_WAKEUP_MASK, + error_int_status)) + ath10k_dbg(ar, ATH10K_DBG_SDIO, "error : wakeup\n"); + + if (FIELD_GET(MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_MASK, + error_int_status)) + ath10k_warn(ar, "rx underflow\n"); + + if (FIELD_GET(MBOX_ERROR_INT_STATUS_TX_OVERFLOW_MASK, + error_int_status)) + ath10k_warn(ar, "tx overflow\n"); + + /* Clear the interrupt */ + irq_data->irq_proc_reg->error_int_status &= ~error_int_status; + + /* set W1C value to clear the interrupt, this hits the register first */ + reg_buf[0] = error_int_status; + + ret = ath10k_sdio_read_write_sync(ar, + MBOX_ERROR_INT_STATUS_ADDRESS, + reg_buf, 4, HIF_WR_SYNC_BYTE_FIX); + if (ret) { + ath10k_warn(ar, "Unable to write error int status address\n"); + goto err_free; + } + + return 0; +err_free: + kfree(reg_buf); +err: + return ret; +} + +static int ath10k_sdio_mbox_proc_cpu_intr(struct ath10k *ar) +{ + int ret; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data; + u8 cpu_int_status, *reg_buf; + + mutex_lock(&irq_data->mtx); + cpu_int_status = irq_data->irq_proc_reg->cpu_int_status & + irq_data->irq_en_reg->cpu_int_status_en; + if (!cpu_int_status) { + ath10k_warn(ar, "CPU interrupt status is zero!\n"); + ret = -EIO; + goto out; + } + + /* Clear the interrupt */ + irq_data->irq_proc_reg->cpu_int_status &= ~cpu_int_status; + + /* Set up the register transfer buffer to hit the register 4 times , + * this is done to make the access 4-byte aligned to mitigate issues + * with host bus interconnects that restrict bus transfer lengths to + * be a multiple of 4-bytes. + */ + reg_buf = kzalloc(4, GFP_KERNEL); + if (!reg_buf) { + ret = -ENOMEM; + goto out; + } + + /* set W1C value to clear the interrupt, this hits the register first */ + reg_buf[0] = cpu_int_status; + + ret = ath10k_sdio_read_write_sync(ar, + MBOX_CPU_INT_STATUS_ADDRESS, + reg_buf, 4, HIF_WR_SYNC_BYTE_FIX); + if (ret) + ath10k_warn(ar, "Unable to write cpu int status address\n"); + + kfree(reg_buf); +out: + mutex_unlock(&irq_data->mtx); + return ret; +} + +static int ath10k_sdio_mbox_read_int_status(struct ath10k *ar, + u8 *host_int_status, + u32 *lookahead) +{ + int ret; + u8 htc_mbox = FIELD_PREP(ATH10K_HTC_MAILBOX_MASK, 1); + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data; + struct ath10k_sdio_irq_proc_regs *irq_proc_reg = irq_data->irq_proc_reg; + struct ath10k_sdio_irq_enable_regs *irq_en_reg = irq_data->irq_en_reg; + + mutex_lock(&irq_data->mtx); + + *lookahead = 0; + *host_int_status = 0; + + /* int_status_en is supposed to be non zero, otherwise interrupts + * shouldn't be enabled. There is however a short time frame during + * initialization between the irq register and int_status_en init + * where this can happen. + * We silently ignore this condition. + */ + if (!irq_en_reg->int_status_en) { + ret = 0; + goto out; + } + + /* Read the first sizeof(struct ath10k_irq_proc_registers) + * bytes of the HTC register table. This + * will yield us the value of different int status + * registers and the lookahead registers. + */ + ret = ath10k_sdio_read_write_sync(ar, + MBOX_HOST_INT_STATUS_ADDRESS, + (u8 *)irq_proc_reg, + sizeof(*irq_proc_reg), + HIF_RD_SYNC_BYTE_INC); + if (ret) + goto out; + + /* Update only those registers that are enabled */ + *host_int_status = irq_proc_reg->host_int_status & + irq_en_reg->int_status_en; + + /* Look at mbox status */ + if (!(*host_int_status & htc_mbox)) { + *lookahead = 0; + goto out; + } + + /* Mask out pending mbox value, we use look ahead as + * the real flag for mbox processing. + */ + *host_int_status &= ~htc_mbox; + if (irq_proc_reg->rx_lookahead_valid & htc_mbox) { + *lookahead = le32_to_cpu( + irq_proc_reg->rx_lookahead[ATH10K_HTC_MAILBOX]); + if (!*lookahead) + ath10k_warn(ar, "lookahead is zero!\n"); + } + +out: + mutex_unlock(&irq_data->mtx); + return ret; +} + +static int ath10k_sdio_mbox_proc_pending_irqs(struct ath10k *ar, + bool *done) +{ + int ret; + u8 host_int_status; + u32 lookahead; + + /* NOTE: HIF implementation guarantees that the context of this + * call allows us to perform SYNCHRONOUS I/O, that is we can block, + * sleep or call any API that can block or switch thread/task + * contexts. This is a fully schedulable context. + */ + + ret = ath10k_sdio_mbox_read_int_status(ar, + &host_int_status, + &lookahead); + if (ret) { + *done = true; + goto out; + } + + if (!host_int_status && !lookahead) { + ret = 0; + *done = true; + goto out; + } + + if (lookahead) { + ath10k_dbg(ar, ATH10K_DBG_SDIO, + "pending mailbox msg, lookahead: 0x%08X\n", + lookahead); + + ret = ath10k_sdio_mbox_rxmsg_pending_handler(ar, + lookahead, + done); + if (ret) + goto out; + } + + /* now, handle the rest of the interrupts */ + ath10k_dbg(ar, ATH10K_DBG_SDIO, + "valid interrupt source(s) for other interrupts: 0x%x\n", + host_int_status); + + if (FIELD_GET(MBOX_HOST_INT_STATUS_CPU_MASK, host_int_status)) { + /* CPU Interrupt */ + ret = ath10k_sdio_mbox_proc_cpu_intr(ar); + if (ret) + goto out; + } + + if (FIELD_GET(MBOX_HOST_INT_STATUS_ERROR_MASK, host_int_status)) { + /* Error Interrupt */ + ret = ath10k_sdio_mbox_proc_err_intr(ar); + if (ret) + goto out; + } + + if (FIELD_GET(MBOX_HOST_INT_STATUS_COUNTER_MASK, host_int_status)) + /* Counter Interrupt */ + ret = ath10k_sdio_mbox_proc_counter_intr(ar); + + ret = 0; + +out: + /* An optimization to bypass reading the IRQ status registers + * unecessarily which can re-wake the target, if upper layers + * determine that we are in a low-throughput mode, we can rely on + * taking another interrupt rather than re-checking the status + * registers which can re-wake the target. + * + * NOTE : for host interfaces that makes use of detecting pending + * mbox messages at hif can not use this optimization due to + * possible side effects, SPI requires the host to drain all + * messages from the mailbox before exiting the ISR routine. + */ + + ath10k_dbg(ar, ATH10K_DBG_SDIO, + "sdio pending irqs done %d status %d", + *done, ret); + + return ret; +} + +static void ath10k_sdio_set_mbox_info(struct ath10k *ar) +{ + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_mbox_info *mbox_info = &ar_sdio->mbox_info; + u16 device = ar_sdio->func->device, dev_id_base, dev_id_chiprev; + + mbox_info->htc_addr = ATH10K_HIF_MBOX_BASE_ADDR; + mbox_info->block_size = ATH10K_HIF_MBOX_BLOCK_SIZE; + mbox_info->block_mask = ATH10K_HIF_MBOX_BLOCK_SIZE - 1; + mbox_info->gmbox_addr = ATH10K_HIF_GMBOX_BASE_ADDR; + mbox_info->gmbox_sz = ATH10K_HIF_GMBOX_WIDTH; + + mbox_info->ext_info[0].htc_ext_addr = ATH10K_HIF_MBOX0_EXT_BASE_ADDR; + + dev_id_base = FIELD_GET(QCA_MANUFACTURER_ID_BASE, device); + dev_id_chiprev = FIELD_GET(QCA_MANUFACTURER_ID_REV_MASK, device); + switch (dev_id_base) { + case QCA_MANUFACTURER_ID_AR6005_BASE: + if (dev_id_chiprev < 4) + mbox_info->ext_info[0].htc_ext_sz = + ATH10K_HIF_MBOX0_EXT_WIDTH; + else + /* from rome 2.0(0x504), the width has been extended + * to 56K + */ + mbox_info->ext_info[0].htc_ext_sz = + ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0; + break; + case QCA_MANUFACTURER_ID_QCA9377_BASE: + mbox_info->ext_info[0].htc_ext_sz = + ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0; + break; + default: + mbox_info->ext_info[0].htc_ext_sz = + ATH10K_HIF_MBOX0_EXT_WIDTH; + } + + mbox_info->ext_info[1].htc_ext_addr = + mbox_info->ext_info[0].htc_ext_addr + + mbox_info->ext_info[0].htc_ext_sz + + ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE; + mbox_info->ext_info[1].htc_ext_sz = ATH10K_HIF_MBOX1_EXT_WIDTH; +} + +/* BMI functions */ + +static int ath10k_sdio_bmi_credits(struct ath10k *ar) +{ + int ret; + u32 addr, *cmd_credits; + unsigned long timeout; + + cmd_credits = kzalloc(sizeof(*cmd_credits), GFP_KERNEL); + if (!cmd_credits) { + ret = -ENOMEM; + goto err; + } + + /* Read the counter register to get the command credits */ + addr = MBOX_COUNT_DEC_ADDRESS + ATH10K_HIF_MBOX_NUM_MAX * 4; + + timeout = jiffies + BMI_COMMUNICATION_TIMEOUT_HZ; + while (time_before(jiffies, timeout) && !*cmd_credits) { + /* Hit the credit counter with a 4-byte access, the first byte + * read will hit the counter and cause a decrement, while the + * remaining 3 bytes has no effect. The rationale behind this + * is to make all HIF accesses 4-byte aligned. + */ + ret = ath10k_sdio_read_write_sync(ar, addr, + (u8 *)cmd_credits, + sizeof(*cmd_credits), + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath10k_warn(ar, + "Unable to decrement the command credit count register: %d\n", + ret); + goto err_free; + } + + /* The counter is only 8 bits. + * Ignore anything in the upper 3 bytes + */ + *cmd_credits &= 0xFF; + } + + if (!*cmd_credits) { + ath10k_warn(ar, "bmi communication timeout\n"); + ret = -ETIMEDOUT; + goto err_free; + } + + return 0; +err_free: + kfree(cmd_credits); +err: + return ret; +} + +static int ath10k_sdio_bmi_get_rx_lookahead(struct ath10k *ar) +{ + int ret; + unsigned long timeout; + u32 *rx_word; + + rx_word = kzalloc(sizeof(*rx_word), GFP_KERNEL); + if (!rx_word) { + ret = -ENOMEM; + goto err; + } + + timeout = jiffies + BMI_COMMUNICATION_TIMEOUT_HZ; + while ((time_before(jiffies, timeout)) && !*rx_word) { + ret = ath10k_sdio_read_write_sync(ar, + MBOX_HOST_INT_STATUS_ADDRESS, + (u8 *)rx_word, + sizeof(*rx_word), + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath10k_warn(ar, "unable to read RX_LOOKAHEAD_VALID\n"); + goto err_free; + } + + /* all we really want is one bit */ + *rx_word &= 1; + } + + if (!*rx_word) { + ath10k_warn(ar, "bmi_recv_buf FIFO empty\n"); + ret = -EINVAL; + goto err_free; + } + + return 0; +err_free: + kfree(rx_word); +err: + return ret; +} + +static int ath10k_sdio_bmi_exchange_msg(struct ath10k *ar, + void *req, u32 req_len, + void *resp, u32 *resp_len) +{ + int ret; + u32 addr; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + + if (req) { + ret = ath10k_sdio_bmi_credits(ar); + if (ret) + goto err; + + addr = ar_sdio->mbox_info.htc_addr; + + memcpy(ar_sdio->bmi_buf, req, req_len); + ret = ath10k_sdio_read_write_sync(ar, addr, ar_sdio->bmi_buf, + req_len, + HIF_WR_SYNC_BYTE_INC); + if (ret) { + ath10k_warn(ar, + "unable to send the bmi data to the device\n"); + goto err; + } + } + + if (!resp || !resp_len) + /* No response expected */ + goto out; + + /* During normal bootup, small reads may be required. + * Rather than issue an HIF Read and then wait as the Target + * adds successive bytes to the FIFO, we wait here until + * we know that response data is available. + * + * This allows us to cleanly timeout on an unexpected + * Target failure rather than risk problems at the HIF level. + * In particular, this avoids SDIO timeouts and possibly garbage + * data on some host controllers. And on an interconnect + * such as Compact Flash (as well as some SDIO masters) which + * does not provide any indication on data timeout, it avoids + * a potential hang or garbage response. + * + * Synchronization is more difficult for reads larger than the + * size of the MBOX FIFO (128B), because the Target is unable + * to push the 129th byte of data until AFTER the Host posts an + * HIF Read and removes some FIFO data. So for large reads the + * Host proceeds to post an HIF Read BEFORE all the data is + * actually available to read. Fortunately, large BMI reads do + * not occur in practice -- they're supported for debug/development. + * + * So Host/Target BMI synchronization is divided into these cases: + * CASE 1: length < 4 + * Should not happen + * + * CASE 2: 4 <= length <= 128 + * Wait for first 4 bytes to be in FIFO + * If CONSERVATIVE_BMI_READ is enabled, also wait for + * a BMI command credit, which indicates that the ENTIRE + * response is available in the the FIFO + * + * CASE 3: length > 128 + * Wait for the first 4 bytes to be in FIFO + * + * For most uses, a small timeout should be sufficient and we will + * usually see a response quickly; but there may be some unusual + * (debug) cases of BMI_EXECUTE where we want an larger timeout. + * For now, we use an unbounded busy loop while waiting for + * BMI_EXECUTE. + * + * If BMI_EXECUTE ever needs to support longer-latency execution, + * especially in production, this code needs to be enhanced to sleep + * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently + * a function of Host processor speed. + */ + ret = ath10k_sdio_bmi_get_rx_lookahead(ar); + if (ret) + goto err; + + /* We always read from the start of the mbox address */ + addr = ar_sdio->mbox_info.htc_addr; + ret = ath10k_sdio_read_write_sync(ar, addr, ar_sdio->bmi_buf, + *resp_len, + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath10k_warn(ar, + "Unable to read the bmi data from the device: %d\n", + ret); + goto err; + } + + memcpy(resp, ar_sdio->bmi_buf, *resp_len); + +out: + return 0; +err: + return ret; +} + +/* sdio async handling functions */ + +static struct ath10k_sdio_bus_request +*ath10k_sdio_alloc_busreq(struct ath10k *ar) +{ + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_sdio_bus_request *bus_req; + + spin_lock_bh(&ar_sdio->lock); + + if (list_empty(&ar_sdio->bus_req_freeq)) { + spin_unlock_bh(&ar_sdio->lock); + bus_req = NULL; + goto out; + } + + bus_req = list_first_entry(&ar_sdio->bus_req_freeq, + struct ath10k_sdio_bus_request, list); + list_del(&bus_req->list); + + spin_unlock_bh(&ar_sdio->lock); + +out: + return bus_req; +} + +static void ath10k_sdio_free_bus_req(struct ath10k *ar, + struct ath10k_sdio_bus_request *bus_req) +{ + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + + memset(bus_req, 0, sizeof(*bus_req)); + spin_lock_bh(&ar_sdio->lock); + list_add_tail(&bus_req->list, &ar_sdio->bus_req_freeq); + spin_unlock_bh(&ar_sdio->lock); +} + +static void __ath10k_sdio_write_async(struct ath10k *ar, + struct ath10k_sdio_bus_request *req) +{ + int ret; + struct ath10k_htc_ep *ep; + struct sk_buff *skb; + + skb = req->skb; + ret = ath10k_sdio_read_write_sync(ar, req->address, + skb->data, skb->len, + req->request); + if (req->htc_msg) { + ep = &ar->htc.endpoint[req->eid]; + ath10k_htc_notify_tx_completion(ep, skb); + } else if (req->comp) { + complete(req->comp); + } + ath10k_sdio_free_bus_req(ar, req); +} + +static void ath10k_sdio_write_async_work(struct work_struct *work) +{ + struct ath10k_sdio *ar_sdio; + struct ath10k *ar; + struct ath10k_sdio_bus_request *req, *tmp_req; + + ar_sdio = container_of(work, struct ath10k_sdio, wr_async_work); + ar = ar_sdio->ar; + + spin_lock_bh(&ar_sdio->wr_async_lock); + list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) { + list_del(&req->list); + spin_unlock_bh(&ar_sdio->wr_async_lock); + __ath10k_sdio_write_async(ar, req); + spin_lock_bh(&ar_sdio->wr_async_lock); + } + spin_unlock_bh(&ar_sdio->wr_async_lock); +} + +static int ath10k_sdio_prep_async_req(struct ath10k *ar, u32 addr, + struct sk_buff *skb, + struct completion *comp, + bool htc_msg, enum ath10k_htc_ep_id eid) +{ + int ret; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_sdio_bus_request *bus_req; + + /* Allocate a bus request for the message and queue it on the + * SDIO workqueue. + */ + bus_req = ath10k_sdio_alloc_busreq(ar); + if (!bus_req) { + ath10k_warn(ar, + "unable to allocate bus request for async request\n"); + ret = -ENOMEM; + goto err; + } + + bus_req->skb = skb; + bus_req->request = HIF_WRITE; + bus_req->eid = eid; + bus_req->address = addr; + bus_req->htc_msg = htc_msg; + bus_req->comp = comp; + + spin_lock_bh(&ar_sdio->wr_async_lock); + list_add_tail(&bus_req->list, &ar_sdio->wr_asyncq); + spin_unlock_bh(&ar_sdio->wr_async_lock); + + return 0; + +err: + return ret; +} + +/* IRQ handler */ + +static void ath10k_sdio_irq_handler(struct sdio_func *func) +{ + int ret; + unsigned long timeout; + struct ath10k_sdio *ar_sdio; + struct ath10k *ar; + bool done = false; + + ar_sdio = sdio_get_drvdata(func); + ar = ar_sdio->ar; + + /* Release the host during interrupts so we can pick it back up when + * we process commands. + */ + sdio_release_host(ar_sdio->func); + + timeout = jiffies + ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ; + while (time_before(jiffies, timeout) && !done) { + ret = ath10k_sdio_mbox_proc_pending_irqs(ar, &done); + if (ret) + break; + } + + sdio_claim_host(ar_sdio->func); + + wake_up(&ar_sdio->irq_wq); + + if (ret && ret != -ECANCELED) + ath10k_warn(ar, "SDIO irq status: %x\n", ret); +} + +/* sdio HIF functions */ + +static int ath10k_sdio_hif_disable_intrs(struct ath10k *ar) +{ + int ret; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data; + struct ath10k_sdio_irq_enable_regs *regs = irq_data->irq_en_reg; + + mutex_lock(&irq_data->mtx); + memset(regs, 0, sizeof(*regs)); + ret = ath10k_sdio_read_write_sync(ar, + MBOX_INT_STATUS_ENABLE_ADDRESS, + ®s->int_status_en, sizeof(*regs), + HIF_WR_SYNC_BYTE_INC); + if (ret) + ath10k_warn(ar, "Unable to disable sdio interrupts\n"); + + mutex_unlock(&irq_data->mtx); + return ret; +} + +static int ath10k_sdio_hif_power_up(struct ath10k *ar) +{ + int ret; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct sdio_func *func = ar_sdio->func; + + if (!ar_sdio->is_disabled) + goto out; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "sdio power on\n"); + + sdio_claim_host(func); + + ret = sdio_enable_func(func); + if (ret) { + ath10k_warn(ar, "Unable to enable sdio func: %d)\n", ret); + sdio_release_host(func); + goto err; + } + + sdio_release_host(func); + + /* Wait for hardware to initialise. It should take a lot less than + * 20 ms but let's be conservative here. + */ + msleep(20); + + ar_sdio->is_disabled = false; + + ret = ath10k_sdio_hif_disable_intrs(ar); + if (ret) + goto err; + +out: + return 0; +err: + return ret; +} + +static void ath10k_sdio_hif_power_down(struct ath10k *ar) +{ + int ret; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + + if (ar_sdio->is_disabled) + goto out; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "sdio power off\n"); + + /* Disable the card */ + sdio_claim_host(ar_sdio->func); + ret = sdio_disable_func(ar_sdio->func); + sdio_release_host(ar_sdio->func); + + if (ret) + ath10k_warn(ar, "Unable to disable sdio: %d\n", ret); + + ar_sdio->is_disabled = true; +out: + return; +} + +static int ath10k_sdio_hif_tx_sg(struct ath10k *ar, u8 pipe_id, + struct ath10k_hif_sg_item *items, int n_items) +{ + int ret, i; + enum ath10k_htc_ep_id eid; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct sk_buff *skb; + + eid = pipe_id_to_eid(pipe_id); + + for (i = 0; i < n_items; i++) { + size_t padded_len; + u32 address; + + skb = items[i].transfer_context; + padded_len = ath10k_sdio_calc_txrx_padded_len(ar_sdio, + skb->len); + skb_trim(skb, padded_len); + + /* Write TX data to the end of the mbox address space */ + address = ar_sdio->mbox_addr[eid] + ar_sdio->mbox_size[eid] - + skb->len; + ret = ath10k_sdio_prep_async_req(ar, address, skb, + NULL, true, eid); + if (ret) + goto err; + } + + queue_work(ar_sdio->workqueue, &ar_sdio->wr_async_work); + + return 0; +err: + return ret; +} + +static int ath10k_sdio_hif_enable_intrs(struct ath10k *ar) +{ + int ret; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data; + struct ath10k_sdio_irq_enable_regs *regs = irq_data->irq_en_reg; + + mutex_lock(&irq_data->mtx); + + /* Enable all but CPU interrupts */ + regs->int_status_en = FIELD_PREP(MBOX_INT_STATUS_ENABLE_ERROR_MASK, 1) | + FIELD_PREP(MBOX_INT_STATUS_ENABLE_CPU_MASK, 1) | + FIELD_PREP(MBOX_INT_STATUS_ENABLE_COUNTER_MASK, 1); + + /* NOTE: There are some cases where HIF can do detection of + * pending mbox messages which is disabled now. + */ + regs->int_status_en |= + FIELD_PREP(MBOX_INT_STATUS_ENABLE_MBOX_DATA_MASK, 1); + + /* Set up the CPU Interrupt status Register */ + regs->cpu_int_status_en = 0; + + /* Set up the Error Interrupt status Register */ + regs->err_int_status_en = + FIELD_PREP(MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK, 1) | + FIELD_PREP(MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK, 1); + + /* Enable Counter interrupt status register to get fatal errors for + * debugging. + */ + regs->cntr_int_status_en = + FIELD_PREP(MBOX_COUNTER_INT_STATUS_ENABLE_BIT_MASK, + ATH10K_SDIO_TARGET_DEBUG_INTR_MASK); + + ret = ath10k_sdio_read_write_sync(ar, + MBOX_INT_STATUS_ENABLE_ADDRESS, + ®s->int_status_en, sizeof(*regs), + HIF_WR_SYNC_BYTE_INC); + if (ret) + ath10k_warn(ar, + "failed to update interrupt ctl reg err: %d\n", + ret); + + mutex_unlock(&irq_data->mtx); + return ret; +} + +#define FIFO_TIMEOUT_AND_CHIP_CONTROL 0x00000868u +#define FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF +#define FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000 + +static int ath10k_sdio_hif_set_mbox_sleep(struct ath10k *ar, bool enable_sleep) +{ + int ret; + u32 *val; + + val = kzalloc(sizeof(*val), GFP_KERNEL); + if (!val) { + ret = -ENOMEM; + goto err; + } + + ret = ath10k_sdio_read_write_sync(ar, FIFO_TIMEOUT_AND_CHIP_CONTROL, + (u8 *)val, sizeof(*val), + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath10k_warn(ar, "Failed to read addr: %x, code: %d\n", + FIFO_TIMEOUT_AND_CHIP_CONTROL, ret); + goto err_free; + } + + if (enable_sleep) + *val &= FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF; + else + *val |= FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON; + + ret = ath10k_sdio_read_write_sync(ar, FIFO_TIMEOUT_AND_CHIP_CONTROL, + (u8 *)val, sizeof(*val), + HIF_WR_SYNC_BYTE_INC); + if (ret) + goto err_free; + + return 0; +err_free: + kfree(val); +err: + return ret; +} + +/* set the window address register (using 4-byte register access ). */ +static int ath10k_sdio_hif_set_addrwin_reg(struct ath10k *ar, u32 reg_addr, + u32 addr) +{ + int ret; + u32 *tmp_addr; + + tmp_addr = kmalloc(sizeof(addr), GFP_KERNEL); + if (!tmp_addr) { + ret = -ENOMEM; + goto err; + } + + *tmp_addr = addr; + ret = ath10k_sdio_read_write_sync(ar, reg_addr, (u8 *)tmp_addr, + 4, HIF_WR_SYNC_BYTE_INC); + + if (ret) { + ath10k_warn(ar, + "%s: failed to write 0x%x to window reg: 0x%X\n", + __func__, addr, reg_addr); + goto err_free; + } + + return 0; +err_free: + kfree(tmp_addr); +err: + return ret; +} + +/* HIF diagnostics */ + +static int ath10k_sdio_hif_diag_read(struct ath10k *ar, u32 address, void *buf, + size_t buf_len) +{ + int ret; + + /* set window register to start read cycle */ + ret = ath10k_sdio_hif_set_addrwin_reg(ar, + MBOX_WINDOW_READ_ADDR_ADDRESS, + address); + + if (ret) + return ret; + + /* read the data */ + ret = ath10k_sdio_read_write_sync(ar, MBOX_WINDOW_DATA_ADDRESS, + (u8 *)buf, buf_len, + HIF_RD_SYNC_BYTE_INC); + if (ret) { + ath10k_warn(ar, "%s: failed to read from window data addr\n", + __func__); + return ret; + } + + return ret; +} + +static int ath10k_sdio_hif_diag_read32(struct ath10k *ar, u32 address, + u32 *value) +{ + int ret; + __le32 *val; + + val = kzalloc(sizeof(*val), GFP_KERNEL); + if (!val) { + ret = -ENOMEM; + goto out; + } + + ret = ath10k_sdio_hif_diag_read(ar, address, val, sizeof(*val)); + if (ret) + goto out_free; + + *value = __le32_to_cpu(*val); + +out_free: + kfree(val); +out: + return ret; +} + +static int ath10k_sdio_hif_diag_write_mem(struct ath10k *ar, u32 address, + const void *data, int nbytes) +{ + int ret; + + /* set write data */ + ret = ath10k_sdio_read_write_sync(ar, MBOX_WINDOW_DATA_ADDRESS, + (u8 *)data, nbytes, + HIF_WR_SYNC_BYTE_INC); + if (ret) { + ath10k_warn(ar, + "%s: failed to write 0x%p to window data addr\n", + __func__, data); + return ret; + } + + /* set window register, which starts the write cycle */ + return ath10k_sdio_hif_set_addrwin_reg(ar, + MBOX_WINDOW_WRITE_ADDR_ADDRESS, + address); +} + +/* HIF start/stop */ + +static int ath10k_sdio_hif_start(struct ath10k *ar) +{ + int ret; + u32 addr, val; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + + /* Sleep 20 ms before HIF interrupts are disabled. + * This will give target plenty of time to process the BMI done + * request before interrupts are disabled. + */ + msleep(20); + ret = ath10k_sdio_hif_disable_intrs(ar); + if (ret) + goto err; + + /* eid 0 always uses the lower part of the extended mailbox address + * space (ext_info[0].htc_ext_addr). + */ + ar_sdio->mbox_addr[0] = ar_sdio->mbox_info.ext_info[0].htc_ext_addr; + ar_sdio->mbox_size[0] = ar_sdio->mbox_info.ext_info[0].htc_ext_sz; + + sdio_claim_host(ar_sdio->func); + + /* Register the isr */ + ret = sdio_claim_irq(ar_sdio->func, ath10k_sdio_irq_handler); + if (ret) { + ath10k_warn(ar, "Failed to claim sdio irq: %d\n", ret); + sdio_release_host(ar_sdio->func); + goto err; + } + + sdio_release_host(ar_sdio->func); + + ret = ath10k_sdio_hif_enable_intrs(ar); + if (ret) + ath10k_warn(ar, "Failed to enable sdio interrupts: %d\n", ret); + + addr = host_interest_item_address(HI_ITEM(hi_acs_flags)); + + ret = ath10k_sdio_hif_diag_read32(ar, addr, &val); + if (ret) { + ath10k_warn(ar, "Unable to read diag mem: %d\n", ret); + goto err; + } + + if (val & HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_FW_ACK) { + ath10k_dbg(ar, ATH10K_DBG_SDIO, + "Mailbox SWAP Service is enabled\n"); + ar_sdio->swap_mbox = true; + } + + /* Enable sleep and then disable it again */ + ret = ath10k_sdio_hif_set_mbox_sleep(ar, true); + if (ret) + goto err; + + /* Wait for 20ms for the written value to take effect */ + msleep(20); + + ret = ath10k_sdio_hif_set_mbox_sleep(ar, false); + if (ret) + goto err; + + return 0; +err: + return ret; +} + +#define SDIO_IRQ_DISABLE_TIMEOUT_HZ (3 * HZ) + +static void ath10k_sdio_irq_disable(struct ath10k *ar) +{ + int ret; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + struct ath10k_sdio_irq_data *irq_data = &ar_sdio->irq_data; + struct ath10k_sdio_irq_enable_regs *regs = irq_data->irq_en_reg; + struct sk_buff *skb; + struct completion irqs_disabled_comp; + + skb = dev_alloc_skb(sizeof(*regs)); + if (!skb) + goto out; + + mutex_lock(&irq_data->mtx); + memset(regs, 0, sizeof(*regs)); /* disable all interrupts */ + memcpy(skb->data, regs, sizeof(*regs)); + skb_put(skb, sizeof(*regs)); + mutex_unlock(&irq_data->mtx); + + init_completion(&irqs_disabled_comp); + ret = ath10k_sdio_prep_async_req(ar, MBOX_INT_STATUS_ENABLE_ADDRESS, + skb, &irqs_disabled_comp, false, 0); + if (ret) + goto out; + + queue_work(ar_sdio->workqueue, &ar_sdio->wr_async_work); + + /* Wait for the completion of the IRQ disable request. + * If there is a timeout we will try to disable irq's anyway. + */ + ret = wait_for_completion_timeout(&irqs_disabled_comp, + SDIO_IRQ_DISABLE_TIMEOUT_HZ); + if (!ret) + ath10k_warn(ar, "sdio irq disable request timed out\n"); + + sdio_claim_host(ar_sdio->func); + + ret = sdio_release_irq(ar_sdio->func); + if (ret) + ath10k_warn(ar, "Failed to release sdio irq: %d\n", ret); + + sdio_release_host(ar_sdio->func); +out: + kfree_skb(skb); +} + +static void ath10k_sdio_hif_stop(struct ath10k *ar) +{ + struct ath10k_sdio_bus_request *req, *tmp_req; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + + ath10k_sdio_irq_disable(ar); + + cancel_work_sync(&ar_sdio->wr_async_work); + + spin_lock_bh(&ar_sdio->wr_async_lock); + + /* Free all bus requests that have not been handled */ + list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) { + struct ath10k_htc_ep *ep; + + list_del(&req->list); + + if (req->htc_msg) { + ep = &ar->htc.endpoint[req->eid]; + ath10k_htc_notify_tx_completion(ep, req->skb); + } else if (req->skb) { + kfree_skb(req->skb); + } + ath10k_sdio_free_bus_req(ar, req); + } + + spin_unlock_bh(&ar_sdio->wr_async_lock); +} + +#ifdef CONFIG_PM + +static int ath10k_sdio_hif_suspend(struct ath10k *ar) +{ + return -EOPNOTSUPP; +} + +static int ath10k_sdio_hif_resume(struct ath10k *ar) +{ + switch (ar->state) { + case ATH10K_STATE_OFF: + ath10k_dbg(ar, ATH10K_DBG_SDIO, + "sdio resume configuring sdio\n"); + + /* need to set sdio settings after power is cut from sdio */ + ath10k_sdio_config(ar); + break; + + case ATH10K_STATE_ON: + default: + break; + } + + return 0; +} +#endif + +static int ath10k_sdio_hif_map_service_to_pipe(struct ath10k *ar, + u16 service_id, + u8 *ul_pipe, u8 *dl_pipe) +{ + int ret, i; + bool ep_found = false; + enum ath10k_htc_ep_id eid; + u32 htt_addr, wmi_addr, htt_mbox_size, wmi_mbox_size; + struct ath10k_htc *htc = &ar->htc; + struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar); + + /* For sdio, we are interested in the mapping between eid + * and pipeid rather than service_id to pipe_id. + * First we find out which eid has been allocated to the + * service... + */ + for (i = 0; i < ATH10K_HTC_EP_COUNT; i++) { + if (htc->endpoint[i].service_id == service_id) { + eid = htc->endpoint[i].eid; + ep_found = true; + break; + } + } + + if (!ep_found) { + ret = -EINVAL; + goto err; + } + + /* Then we create the simplest mapping possible between pipeid + * and eid + */ + *ul_pipe = *dl_pipe = (u8)eid; + + /* Normally, HTT will use the upper part of the extended + * mailbox address space (ext_info[1].htc_ext_addr) and WMI ctrl + * the lower part (ext_info[0].htc_ext_addr). + * If fw wants swapping of mailbox addresses, the opposite is true. + */ + if (ar_sdio->swap_mbox) { + htt_addr = ar_sdio->mbox_info.ext_info[0].htc_ext_addr; + wmi_addr = ar_sdio->mbox_info.ext_info[1].htc_ext_addr; + htt_mbox_size = ar_sdio->mbox_info.ext_info[0].htc_ext_sz; + wmi_mbox_size = ar_sdio->mbox_info.ext_info[1].htc_ext_sz; + } else { + htt_addr = ar_sdio->mbox_info.ext_info[1].htc_ext_addr; + wmi_addr = ar_sdio->mbox_info.ext_info[0].htc_ext_addr; + htt_mbox_size = ar_sdio->mbox_info.ext_info[1].htc_ext_sz; + wmi_mbox_size = ar_sdio->mbox_info.ext_info[0].htc_ext_sz; + } + + switch (service_id) { + case ATH10K_HTC_SVC_ID_RSVD_CTRL: + /* HTC ctrl ep mbox address has already been setup in + * ath10k_sdio_hif_start + */ + break; + case ATH10K_HTC_SVC_ID_WMI_CONTROL: + ar_sdio->mbox_addr[eid] = wmi_addr; + ar_sdio->mbox_size[eid] = wmi_mbox_size; + ath10k_dbg(ar, ATH10K_DBG_SDIO, + "WMI ctrl mbox addr = %x, mbox_size = %x\n", + ar_sdio->mbox_addr[eid], ar_sdio->mbox_size[eid]); + break; + case ATH10K_HTC_SVC_ID_HTT_DATA_MSG: + ar_sdio->mbox_addr[eid] = htt_addr; + ar_sdio->mbox_size[eid] = htt_mbox_size; + ath10k_dbg(ar, ATH10K_DBG_SDIO, + "HTT data mbox addr = %x, mbox_size = %x\n", + ar_sdio->mbox_addr[eid], ar_sdio->mbox_size[eid]); + break; + default: + ath10k_warn(ar, "Unsupported service ID: %x\n", + service_id); + ret = -EINVAL; + goto err; + } + + return 0; +err: + return ret; +} + +static void ath10k_sdio_hif_get_default_pipe(struct ath10k *ar, + u8 *ul_pipe, u8 *dl_pipe) +{ + ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio hif get default pipe\n"); + + /* HTC ctrl ep (SVC id 1) always has eid (and pipe_id in our + * case) == 0 + */ + *ul_pipe = 0; + *dl_pipe = 0; +} + +/* This op is currently only used by htc_wait_target if the HTC ready + * message times out. It is not applicable for SDIO since there is nothing + * we can do if the HTC ready message does not arrive in time. + * TODO: Make this op non mandatory by introducing a NULL check in the + * hif op wrapper. + */ +static void ath10k_sdio_hif_send_complete_check(struct ath10k *ar, + u8 pipe, int force) +{ +} + +static const struct ath10k_hif_ops ath10k_sdio_hif_ops = { + .tx_sg = ath10k_sdio_hif_tx_sg, + .diag_read = ath10k_sdio_hif_diag_read, + .diag_write = ath10k_sdio_hif_diag_write_mem, + .exchange_bmi_msg = ath10k_sdio_bmi_exchange_msg, + .start = ath10k_sdio_hif_start, + .stop = ath10k_sdio_hif_stop, + .map_service_to_pipe = ath10k_sdio_hif_map_service_to_pipe, + .get_default_pipe = ath10k_sdio_hif_get_default_pipe, + .send_complete_check = ath10k_sdio_hif_send_complete_check, + .power_up = ath10k_sdio_hif_power_up, + .power_down = ath10k_sdio_hif_power_down, +#ifdef CONFIG_PM + .suspend = ath10k_sdio_hif_suspend, + .resume = ath10k_sdio_hif_resume, +#endif +}; + +#ifdef CONFIG_PM_SLEEP + +/* Empty handlers so that mmc subsystem doesn't remove us entirely during + * suspend. We instead follow cfg80211 suspend/resume handlers. + */ +static int ath10k_sdio_pm_suspend(struct device *device) +{ + return 0; +} + +static int ath10k_sdio_pm_resume(struct device *device) +{ + return 0; +} + +static SIMPLE_DEV_PM_OPS(ath10k_sdio_pm_ops, ath10k_sdio_pm_suspend, + ath10k_sdio_pm_resume); + +#define ATH10K_SDIO_PM_OPS (&ath10k_sdio_pm_ops) + +#else + +#define ATH10K_SDIO_PM_OPS NULL + +#endif /* CONFIG_PM_SLEEP */ + +static int ath10k_sdio_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + int ret, i; + struct ath10k_sdio *ar_sdio; + struct ath10k *ar; + enum ath10k_hw_rev hw_rev; + u32 chip_id, dev_id_base; + + /* Assumption: All SDIO based chipsets (so far) are QCA6174 based. + * If there will be newer chipsets that does not use the hw reg + * setup as defined in qca6174_regs and qca6174_values, this + * assumption is no longer valid and hw_rev must be setup differently + * depending on chipset. + */ + hw_rev = ATH10K_HW_QCA6174; + + ar = ath10k_core_create(sizeof(*ar_sdio), &func->dev, ATH10K_BUS_SDIO, + hw_rev, &ath10k_sdio_hif_ops); + if (!ar) { + dev_err(&func->dev, "failed to allocate core\n"); + ret = -ENOMEM; + goto err; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n", + func->num, func->vendor, func->device, + func->max_blksize, func->cur_blksize); + + ar_sdio = ath10k_sdio_priv(ar); + + ar_sdio->irq_data.irq_proc_reg = + kzalloc(sizeof(struct ath10k_sdio_irq_proc_regs), + GFP_KERNEL); + if (!ar_sdio->irq_data.irq_proc_reg) { + ret = -ENOMEM; + goto err_core_destroy; + } + + ar_sdio->irq_data.irq_en_reg = + kzalloc(sizeof(struct ath10k_sdio_irq_enable_regs), + GFP_KERNEL); + if (!ar_sdio->irq_data.irq_en_reg) { + ret = -ENOMEM; + goto err_free_proc_reg; + } + + ar_sdio->bmi_buf = kzalloc(BMI_MAX_CMDBUF_SIZE, GFP_KERNEL); + if (!ar_sdio->bmi_buf) { + ret = -ENOMEM; + goto err_free_en_reg; + } + + ar_sdio->func = func; + sdio_set_drvdata(func, ar_sdio); + + ar_sdio->is_disabled = true; + ar_sdio->ar = ar; + + spin_lock_init(&ar_sdio->lock); + spin_lock_init(&ar_sdio->wr_async_lock); + mutex_init(&ar_sdio->irq_data.mtx); + + INIT_LIST_HEAD(&ar_sdio->bus_req_freeq); + INIT_LIST_HEAD(&ar_sdio->wr_asyncq); + + INIT_WORK(&ar_sdio->wr_async_work, ath10k_sdio_write_async_work); + ar_sdio->workqueue = create_singlethread_workqueue("ath10k_sdio_wq"); + if (!ar_sdio->workqueue) { + ret = -ENOMEM; + goto err_free_bmi_buf; + } + + init_waitqueue_head(&ar_sdio->irq_wq); + + for (i = 0; i < ATH10K_SDIO_BUS_REQUEST_MAX_NUM; i++) + ath10k_sdio_free_bus_req(ar, &ar_sdio->bus_req[i]); + + dev_id_base = FIELD_GET(QCA_MANUFACTURER_ID_BASE, id->device); + switch (dev_id_base) { + case QCA_MANUFACTURER_ID_AR6005_BASE: + case QCA_MANUFACTURER_ID_QCA9377_BASE: + ar->dev_id = QCA9377_1_0_DEVICE_ID; + break; + default: + ret = -ENODEV; + ath10k_warn(ar, + "unsupported dev id: %u, full: 0x%x\n", + dev_id_base, id->device); + goto err_free_bmi_buf; + } + ar->id.vendor = id->vendor; + ar->id.device = id->device; + + ath10k_sdio_set_mbox_info(ar); + + ret = ath10k_sdio_config(ar); + if (ret) { + ath10k_warn(ar, "Failed to config sdio: %d\n", ret); + goto err_free_wq; + } + + /* TODO: don't know yet how to get chip_id with SDIO */ + chip_id = 0; + ret = ath10k_core_register(ar, chip_id); + if (ret) { + ath10k_warn(ar, "failed to register driver core: %d\n", ret); + goto err_free_wq; + } + + return 0; + +err_free_wq: + destroy_workqueue(ar_sdio->workqueue); +err_free_bmi_buf: + kfree(ar_sdio->bmi_buf); +err_free_en_reg: + kfree(ar_sdio->irq_data.irq_en_reg); +err_free_proc_reg: + kfree(ar_sdio->irq_data.irq_proc_reg); +err_core_destroy: + ath10k_core_destroy(ar); +err: + return ret; +} + +static void ath10k_sdio_remove(struct sdio_func *func) +{ + struct ath10k_sdio *ar_sdio; + struct ath10k *ar; + + ar_sdio = sdio_get_drvdata(func); + ar = ar_sdio->ar; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "sdio removed func %d vendor 0x%x device 0x%x\n", + func->num, func->vendor, func->device); + + (void)ath10k_sdio_hif_disable_intrs(ar); + cancel_work_sync(&ar_sdio->wr_async_work); + ath10k_core_unregister(ar); + ath10k_core_destroy(ar); +} + +static const struct sdio_device_id ath10k_sdio_devices[] = { + {SDIO_DEVICE(QCA_MANUFACTURER_CODE, + (QCA_SDIO_ID_AR6005_BASE | 0xA))}, + {SDIO_DEVICE(QCA_MANUFACTURER_CODE, + (QCA_SDIO_ID_QCA9377_BASE | 0x1))}, + {}, +}; + +MODULE_DEVICE_TABLE(sdio, ath10k_sdio_devices); + +static struct sdio_driver ath10k_sdio_driver = { + .name = "ath10k_sdio", + .id_table = ath10k_sdio_devices, + .probe = ath10k_sdio_probe, + .remove = ath10k_sdio_remove, + .drv.pm = ATH10K_SDIO_PM_OPS, +}; + +static int __init ath10k_sdio_init(void) +{ + int ret; + + ret = sdio_register_driver(&ath10k_sdio_driver); + if (ret) + pr_err("sdio driver registration failed: %d\n", ret); + + return ret; +} + +static void __exit ath10k_sdio_exit(void) +{ + sdio_unregister_driver(&ath10k_sdio_driver); +} + +module_init(ath10k_sdio_init); +module_exit(ath10k_sdio_exit); + +MODULE_AUTHOR("Qualcomm Atheros"); +MODULE_DESCRIPTION("Driver support for Qualcomm Atheros 802.11ac WLAN SDIO devices"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/wireless/ath/ath10k/sdio.h b/drivers/net/wireless/ath/ath10k/sdio.h new file mode 100644 index 0000000..bc8d6e5 --- /dev/null +++ b/drivers/net/wireless/ath/ath10k/sdio.h @@ -0,0 +1,263 @@ +/* + * Copyright (c) 2004-2011 Atheros Communications Inc. + * Copyright (c) 2011-2012 Qualcomm Atheros, Inc. + * Copyright (c) 2016-2017 Erik Stromdahl + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _SDIO_H_ +#define _SDIO_H_ + +#define ATH10K_HIF_MBOX_BLOCK_SIZE 256 + +#define QCA_MANUFACTURER_ID_BASE GENMASK(11, 8) +#define QCA_MANUFACTURER_ID_AR6005_BASE 0x5 +#define QCA_MANUFACTURER_ID_QCA9377_BASE 0x7 +#define QCA_SDIO_ID_AR6005_BASE 0x500 +#define QCA_SDIO_ID_QCA9377_BASE 0x700 +#define QCA_MANUFACTURER_ID_REV_MASK 0x00FF +#define QCA_MANUFACTURER_CODE 0x271 /* Qualcomm/Atheros */ + +#define ATH10K_SDIO_MAX_BUFFER_SIZE 4096 /*Unsure of this constant*/ + +/* Mailbox address in SDIO address space */ +#define ATH10K_HIF_MBOX_BASE_ADDR 0x1000 +#define ATH10K_HIF_MBOX_WIDTH 0x800 + +#define ATH10K_HIF_MBOX_TOT_WIDTH \ + (ATH10K_HIF_MBOX_NUM_MAX * ATH10K_HIF_MBOX_WIDTH) + +#define ATH10K_HIF_MBOX0_EXT_BASE_ADDR 0x5000 +#define ATH10K_HIF_MBOX0_EXT_WIDTH (36 * 1024) +#define ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0 (56 * 1024) +#define ATH10K_HIF_MBOX1_EXT_WIDTH (36 * 1024) +#define ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE (2 * 1024) + +#define ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH \ + (ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr)) + +#define ATH10K_HIF_MBOX_NUM_MAX 4 +#define ATH10K_SDIO_BUS_REQUEST_MAX_NUM 64 + +#define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ) + +/* HTC runs over mailbox 0 */ +#define ATH10K_HTC_MAILBOX 0 +#define ATH10K_HTC_MAILBOX_MASK BIT(ATH10K_HTC_MAILBOX) + +/* GMBOX addresses */ +#define ATH10K_HIF_GMBOX_BASE_ADDR 0x7000 +#define ATH10K_HIF_GMBOX_WIDTH 0x4000 + +/* Modified versions of the sdio.h macros. + * The macros in sdio.h can't be used easily with the FIELD_{PREP|GET} + * macros in bitfield.h, so we define our own macros here. + */ +#define ATH10K_SDIO_DRIVE_DTSX_MASK \ + (SDIO_DRIVE_DTSx_MASK << SDIO_DRIVE_DTSx_SHIFT) + +#define ATH10K_SDIO_DRIVE_DTSX_TYPE_B 0 +#define ATH10K_SDIO_DRIVE_DTSX_TYPE_A 1 +#define ATH10K_SDIO_DRIVE_DTSX_TYPE_C 2 +#define ATH10K_SDIO_DRIVE_DTSX_TYPE_D 3 + +/* SDIO CCCR register definitions */ +#define CCCR_SDIO_IRQ_MODE_REG 0xF0 +#define CCCR_SDIO_IRQ_MODE_REG_SDIO3 0x16 + +#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR 0xF2 + +#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A 0x02 +#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C 0x04 +#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D 0x08 + +#define CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS 0xF0 +#define CCCR_SDIO_ASYNC_INT_DELAY_MASK 0xC0 + +/* mode to enable special 4-bit interrupt assertion without clock */ +#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ BIT(0) +#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3 BIT(1) + +#define ATH10K_SDIO_TARGET_DEBUG_INTR_MASK 0x01 + +/* The theoretical maximum number of RX messages that can be fetched + * from the mbox interrupt handler in one loop is derived in the following + * way: + * + * Let's assume that each packet in a bundle of the maximum bundle size + * (HTC_HOST_MAX_MSG_PER_BUNDLE) has the HTC header bundle count set + * to the maximum value (HTC_HOST_MAX_MSG_PER_BUNDLE). + * + * in this case the driver must allocate + * (HTC_HOST_MAX_MSG_PER_BUNDLE * HTC_HOST_MAX_MSG_PER_BUNDLE) skb's. + */ +#define ATH10K_SDIO_MAX_RX_MSGS \ + (HTC_HOST_MAX_MSG_PER_BUNDLE * HTC_HOST_MAX_MSG_PER_BUNDLE) + +struct ath10k_sdio_bus_request { + struct list_head list; + + /* sdio address */ + u32 address; + u32 request; + struct sk_buff *skb; + enum ath10k_htc_ep_id eid; + int status; + /* Specifies if the current request is an HTC message. + * If not, the eid is not applicable an the TX completion handler + * associated with the endpoint will not be invoked. + */ + bool htc_msg; + /* Completion that (if set) will be invoked for non HTC requests + * (htc_msg == false) when the request has been processed. + */ + struct completion *comp; +}; + +struct ath10k_sdio_rx_data { + struct sk_buff *skb; + size_t alloc_len; + size_t act_len; + enum ath10k_htc_ep_id eid; + bool part_of_bundle; + bool last_in_bundle; + bool trailer_only; + int status; +}; + +/* direction of transfer (read/write) */ +#define HIF_READ 0x00000001 +#define HIF_WRITE 0x00000002 + +/* dmode - An interface may support different kinds of commands based on + * the tradeoff between the amount of data it can carry and the + * setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/ + * HIF_BLOCK_BASIS). In case of latter, the data is rounded off + * to the nearest block size by padding. The size of the block is + * configurable at compile time using the HIF_BLOCK_SIZE and is + * negotiated with the target during initialization after the + * ATH10K interrupts are enabled. + */ +#define HIF_BYTE_BASIS 0x00000040 +#define HIF_BLOCK_BASIS 0x00000080 + +/* amode - This indicates if the address has to be incremented on ATH10K + * after every read/write operation (HIF?FIXED_ADDRESS/ + * HIF_INCREMENTAL_ADDRESS). + */ +#define HIF_FIXED_ADDRESS 0x00000100 +#define HIF_INCREMENTAL_ADDRESS 0x00000200 + +#define HIF_WR_SYNC_BYTE_FIX \ + (HIF_WRITE | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) + +#define HIF_WR_SYNC_BYTE_INC \ + (HIF_WRITE | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) + +#define HIF_RD_SYNC_BYTE_INC \ + (HIF_READ | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) + +#define HIF_RD_SYNC_BYTE_FIX \ + (HIF_READ | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) + +#define HIF_RD_SYNC_BLOCK_FIX \ + (HIF_READ | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS) + +struct ath10k_sdio_irq_proc_regs { + u8 host_int_status; + u8 cpu_int_status; + u8 error_int_status; + u8 counter_int_status; + u8 mbox_frame; + u8 rx_lookahead_valid; + u8 host_int_status2; + u8 gmbox_rx_avail; + __le32 rx_lookahead[2]; + __le32 rx_gmbox_lookahead_alias[2]; +}; + +struct ath10k_sdio_irq_enable_regs { + u8 int_status_en; + u8 cpu_int_status_en; + u8 err_int_status_en; + u8 cntr_int_status_en; +}; + +struct ath10k_sdio_irq_data { + /* protects irq_proc_reg and irq_en_reg below. + * We use a mutex here and not a spinlock since we will have the + * mutex locked while calling the sdio_memcpy_ functions. + * These function require non atomic context, and hence, spinlocks + * can be held while calling these functions. + */ + struct mutex mtx; + struct ath10k_sdio_irq_proc_regs *irq_proc_reg; + struct ath10k_sdio_irq_enable_regs *irq_en_reg; +}; + +struct ath10k_mbox_ext_info { + u32 htc_ext_addr; + u32 htc_ext_sz; +}; + +struct ath10k_mbox_info { + u32 htc_addr; + struct ath10k_mbox_ext_info ext_info[2]; + u32 block_size; + u32 block_mask; + u32 gmbox_addr; + u32 gmbox_sz; +}; + +struct ath10k_sdio { + struct sdio_func *func; + + struct ath10k_mbox_info mbox_info; + bool swap_mbox; + u32 mbox_addr[ATH10K_HTC_EP_COUNT]; + u32 mbox_size[ATH10K_HTC_EP_COUNT]; + + /* available bus requests */ + struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM]; + /* free list of bus requests */ + struct list_head bus_req_freeq; + /* protects access to bus_req_freeq */ + spinlock_t lock; + + struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS]; + size_t n_rx_pkts; + + struct ath10k *ar; + struct ath10k_sdio_irq_data irq_data; + + /* temporary buffer for BMI requests */ + u8 *bmi_buf; + + wait_queue_head_t irq_wq; + + bool is_disabled; + + struct workqueue_struct *workqueue; + struct work_struct wr_async_work; + struct list_head wr_asyncq; + /* protects access to wr_asyncq */ + spinlock_t wr_async_lock; +}; + +static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar) +{ + return (struct ath10k_sdio *)ar->drv_priv; +} + +#endif