@@ -33,33 +33,33 @@
*/
/* Only these channels all allow active scan on all world regulatory domains */
-#define ATH9K_2GHZ_CH01_11 REG_RULE(2412-10, 2462+10, 40, 0, 20, 0)
+#define ATH_2GHZ_CH01_11 REG_RULE(2412-10, 2462+10, 40, 0, 20, 0)
/* We enable active scan on these a case by case basis by regulatory domain */
-#define ATH9K_2GHZ_CH12_13 REG_RULE(2467-10, 2472+10, 40, 0, 20,\
+#define ATH_2GHZ_CH12_13 REG_RULE(2467-10, 2472+10, 40, 0, 20,\
NL80211_RRF_NO_IR)
-#define ATH9K_2GHZ_CH14 REG_RULE(2484-10, 2484+10, 40, 0, 20,\
+#define ATH_2GHZ_CH14 REG_RULE(2484-10, 2484+10, 40, 0, 20,\
NL80211_RRF_NO_IR | \
NL80211_RRF_NO_OFDM)
/* We allow IBSS on these on a case by case basis by regulatory domain */
-#define ATH9K_5GHZ_5150_5350 REG_RULE(5150-10, 5350+10, 80, 0, 30,\
+#define ATH_5GHZ_5150_5350 REG_RULE(5150-10, 5350+10, 80, 0, 30,\
NL80211_RRF_NO_IR)
-#define ATH9K_5GHZ_5470_5850 REG_RULE(5470-10, 5850+10, 80, 0, 30,\
+#define ATH_5GHZ_5470_5850 REG_RULE(5470-10, 5850+10, 80, 0, 30,\
NL80211_RRF_NO_IR)
-#define ATH9K_5GHZ_5725_5850 REG_RULE(5725-10, 5850+10, 80, 0, 30,\
+#define ATH_5GHZ_5725_5850 REG_RULE(5725-10, 5850+10, 80, 0, 30,\
NL80211_RRF_NO_IR)
-#define ATH9K_2GHZ_ALL ATH9K_2GHZ_CH01_11, \
- ATH9K_2GHZ_CH12_13, \
- ATH9K_2GHZ_CH14
+#define ATH_2GHZ_ALL ATH_2GHZ_CH01_11, \
+ ATH_2GHZ_CH12_13, \
+ ATH_2GHZ_CH14
-#define ATH9K_5GHZ_ALL ATH9K_5GHZ_5150_5350, \
- ATH9K_5GHZ_5470_5850
+#define ATH_5GHZ_ALL ATH_5GHZ_5150_5350, \
+ ATH_5GHZ_5470_5850
/* This one skips what we call "mid band" */
-#define ATH9K_5GHZ_NO_MIDBAND ATH9K_5GHZ_5150_5350, \
- ATH9K_5GHZ_5725_5850
+#define ATH_5GHZ_NO_MIDBAND ATH_5GHZ_5150_5350, \
+ ATH_5GHZ_5725_5850
/* Can be used for:
* 0x60, 0x61, 0x62 */
@@ -67,8 +67,8 @@
.n_reg_rules = 5,
.alpha2 = "99",
.reg_rules = {
- ATH9K_2GHZ_ALL,
- ATH9K_5GHZ_ALL,
+ ATH_2GHZ_ALL,
+ ATH_5GHZ_ALL,
}
};
@@ -77,9 +77,9 @@
.n_reg_rules = 4,
.alpha2 = "99",
.reg_rules = {
- ATH9K_2GHZ_CH01_11,
- ATH9K_2GHZ_CH12_13,
- ATH9K_5GHZ_NO_MIDBAND,
+ ATH_2GHZ_CH01_11,
+ ATH_2GHZ_CH12_13,
+ ATH_5GHZ_NO_MIDBAND,
}
};
@@ -88,8 +88,8 @@
.n_reg_rules = 3,
.alpha2 = "99",
.reg_rules = {
- ATH9K_2GHZ_CH01_11,
- ATH9K_5GHZ_NO_MIDBAND,
+ ATH_2GHZ_CH01_11,
+ ATH_5GHZ_NO_MIDBAND,
}
};
@@ -98,8 +98,8 @@
.n_reg_rules = 3,
.alpha2 = "99",
.reg_rules = {
- ATH9K_2GHZ_CH01_11,
- ATH9K_5GHZ_ALL,
+ ATH_2GHZ_CH01_11,
+ ATH_5GHZ_ALL,
}
};
@@ -108,9 +108,9 @@
.n_reg_rules = 4,
.alpha2 = "99",
.reg_rules = {
- ATH9K_2GHZ_CH01_11,
- ATH9K_2GHZ_CH12_13,
- ATH9K_5GHZ_ALL,
+ ATH_2GHZ_CH01_11,
+ ATH_2GHZ_CH12_13,
+ ATH_5GHZ_ALL,
}
};
Regulatory rule defines in regd.c are used not only by ath9k but also ath10k driver (haven't test other drivers) and thus should be renamed from ATH9K* to ATH*. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> --- drivers/net/wireless/ath/regd.c | 50 +++++++++++++++++++------------------- 1 files changed, 25 insertions(+), 25 deletions(-)