| Message ID | 1591856446-26977-1-git-send-email-vnaralas@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ath10k: fix retry packets update in station dump | expand |
On 6/11/20 8:20 AM, Venkateswara Naralasetty wrote: > When tx status enabled, retry count is updated from tx completion status. > which is not working as expected due to firmware limitation where > firmware can not provide per MSDU rate statistics from tx completion > status. Due to this tx retry count is always 0 in station dump. > > Fix this issue by updating the retry packet count from per peer > statistics. This patch will not break on SDIO devices since, this retry > count is already updating from peer statistics for SDIO devices. > > HW used: QCA9984 > FW version: 10.4-3.6-00104 Thanks a lot for this patch! I tested it on the following HW, where it also works. HW: QCA9882 FW: 10.2.4-1.0-00047 Markus
Venkateswara Naralasetty <vnaralas@codeaurora.org> wrote: > When tx status enabled, retry count is updated from tx completion status. > which is not working as expected due to firmware limitation where > firmware can not provide per MSDU rate statistics from tx completion > status. Due to this tx retry count is always 0 in station dump. > > Fix this issue by updating the retry packet count from per peer > statistics. This patch will not break on SDIO devices since, this retry > count is already updating from peer statistics for SDIO devices. > > Tested-on: QCA9984 PCI 10.4-3.6-00104 > Tested-on: QCA9882 PCI 10.2.4-1.0-00047 > > Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> > Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Patch applied to ath-next branch of ath.git, thanks. 67b927f98208 ath10k: fix retry packets update in station dump
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index d787cbe..cac05e7 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -3575,12 +3575,14 @@ ath10k_update_per_peer_tx_stats(struct ath10k *ar, } if (ar->htt.disable_tx_comp) { - arsta->tx_retries += peer_stats->retry_pkts; arsta->tx_failed += peer_stats->failed_pkts; - ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx retries %d tx failed %d\n", - arsta->tx_retries, arsta->tx_failed); + ath10k_dbg(ar, ATH10K_DBG_HTT, "tx failed %d\n", + arsta->tx_failed); } + arsta->tx_retries += peer_stats->retry_pkts; + ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx retries %d", arsta->tx_retries); + if (ath10k_debug_is_extd_tx_stats_enabled(ar)) ath10k_accumulate_per_peer_tx_stats(ar, arsta, peer_stats, rate_idx); diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 919d155..d9d4b15 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -8547,12 +8547,13 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw, sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE); if (ar->htt.disable_tx_comp) { - sinfo->tx_retries = arsta->tx_retries; - sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_RETRIES); sinfo->tx_failed = arsta->tx_failed; sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_FAILED); } + sinfo->tx_retries = arsta->tx_retries; + sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_RETRIES); + ath10k_mac_sta_get_peer_stats_info(ar, sta, sinfo); }
When tx status enabled, retry count is updated from tx completion status. which is not working as expected due to firmware limitation where firmware can not provide per MSDU rate statistics from tx completion status. Due to this tx retry count is always 0 in station dump. Fix this issue by updating the retry packet count from per peer statistics. This patch will not break on SDIO devices since, this retry count is already updating from peer statistics for SDIO devices. HW used: QCA9984 FW version: 10.4-3.6-00104 Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> --- drivers/net/wireless/ath/ath10k/htt_rx.c | 8 +++++--- drivers/net/wireless/ath/ath10k/mac.c | 5 +++-- 2 files changed, 8 insertions(+), 5 deletions(-)