Starting with firmware 10.4.3.4.x series QCA changed the handling of the channel property band_center_freq1 and band_center_freq2 in vht160 operation mode likelly for backward compatibility with vht80 only capable clients. This patch adjusts the handling

Commit Message

Sebastian Gottschall July 4, 2018, 9:50 a.m. UTC

From: Sebastian Gottschall <[e-mail]>

Signed-off-by: Sebastian Gottschall <[e-mail]>

v2: fix trailing whitespace issue and fix some typos within the commit note
---
 drivers/net/wireless/ath/ath10k/mac.c |  7 -------
 drivers/net/wireless/ath/ath10k/wmi.c | 11 ++++++++---
 2 files changed, 8 insertions(+), 10 deletions(-)

Patch

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 95243b48a179..46885b915eb7 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4442,13 +4442,6 @@  static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
 		vht_cap.cap |= val;
 	}
 
-	/* Currently the firmware seems to be buggy, don't enable 80+80
-	 * mode until that's resolved.
-	 */
-	if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) &&
-	    (ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == 0)
-		vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
-
 	mcs_map = 0;
 	for (i = 0; i < 8; i++) {
 		if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 877249ac6fd4..e2adf34effb3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1677,13 +1677,18 @@  void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
 		flags |= WMI_CHAN_FLAG_HT40_PLUS;
 	if (arg->chan_radar)
 		flags |= WMI_CHAN_FLAG_DFS;
-
+	ch->band_center_freq2 = 0;
 	ch->mhz = __cpu_to_le32(arg->freq);
 	ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1);
 	if (arg->mode == MODE_11AC_VHT80_80)
 		ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq2);
-	else
-		ch->band_center_freq2 = 0;
+	if (arg->mode == MODE_11AC_VHT160)  {
+		if (arg->freq < arg->band_center_freq1)
+			ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1 - 40);
+		else
+			ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1 + 40);
+		ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq1);
+	}
 	ch->min_power = arg->min_power;
 	ch->max_power = arg->max_power;
 	ch->reg_power = arg->max_reg_power;