diff mbox series

[v3,09/11] mac80211: do not allow HT/VHT IEs in 6 GHz mesh mode

Message ID 1589399105-25472-9-git-send-email-rmanohar@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series [v3,01/11] cfg80211: use only HE capability to set prohibited flags in 6 GHz | expand

Commit Message

Rajkumar Manoharan May 13, 2020, 7:45 p.m. UTC 
As HT/VHT elements are not allowed in 6 GHz band, do not include
them in mesh beacon template formation.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
---
 net/mac80211/mesh.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 0cbe3260c5c1..04d3da733bc8 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -415,6 +415,10 @@  int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
 	if (!sband)
 		return -EINVAL;
 
+	/* HT not allowed in 6 GHz */
+	if (sband->band == NL80211_BAND_6GHZ)
+		return 0;
+
 	if (!sband->ht_cap.ht_supported ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
@@ -452,6 +456,10 @@  int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata,
 	sband = local->hw.wiphy->bands[channel->band];
 	ht_cap = &sband->ht_cap;
 
+	/* HT not allowed in 6 GHz */
+	if (sband->band == NL80211_BAND_6GHZ)
+		return 0;
+
 	if (!ht_cap->ht_supported ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
@@ -479,6 +487,10 @@  int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data *sdata,
 	if (!sband)
 		return -EINVAL;
 
+	/* VHT not allowed in 6 GHz */
+	if (sband->band == NL80211_BAND_6GHZ)
+		return 0;
+
 	if (!sband->vht_cap.vht_supported ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
@@ -516,6 +528,10 @@  int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data *sdata,
 	sband = local->hw.wiphy->bands[channel->band];
 	vht_cap = &sband->vht_cap;
 
+	/* VHT not allowed in 6 GHz */
+	if (sband->band == NL80211_BAND_6GHZ)
+		return 0;
+
 	if (!vht_cap->vht_supported ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||